Xp-l hi v3 normal amps dd?

5 posts / 0 new
Last post
alberto7
Offline
Last seen: 40 min 39 sec ago
Joined: 08/17/2014 - 06:04
Posts: 163
Xp-l hi v3 normal amps dd?

Hi, i build a convoy c8 with this:

Xp-l hi v3 3c
LD-A4 6 amps driver
20 awg wire for led
Carobronze spring (not bypass)

I measure 4,51 Amps with GA, i don´t have any better cell

is this normal? or its low?

Thanks.

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 40 min 33 sec ago
Joined: 04/11/2014 - 18:05
Posts: 2642
Location: The Motor City

Yep….. now bypass the driver spring

KB1428 “Live Life WOT”

bilakos10
bilakos10's picture
Offline
Last seen: 6 hours 21 min ago
Joined: 08/22/2013 - 14:25
Posts: 930
Location: Thessaloniki, Greece

Bypass the spring and measure again.
Everything else seems fine.

My daily deals thread: ☢ [Gearbest.com Special Deals]
If you need any coupon code, just leave a reply on the thread.

everydaysurvivalgear
everydaysurvivalgear's picture
Offline
Last seen: 2 hours 14 min ago
Joined: 07/31/2015 - 10:25
Posts: 2712
Location: sydney australia (GMT+10)

You might get 1-1.5 amps more by bypassing the springs.

Is it a 1A tint?

alberto7
Offline
Last seen: 40 min 39 sec ago
Joined: 08/17/2014 - 06:04
Posts: 163

Thanks all for the feedback. I don´t like bypased springs, i like this way. Now i know that its normal amps read Thumbs Up

Its 3C tint BTW, great tint (not green my unit ) Smile