The title says it all, looking to buy one or two at least. Someone posted related info the other day in a thread, but can't remember where. 
Cheers ^:)
Good luck. I have been trying to find a XHP70 High CRI for a reasonable price for months now. The only place I found was a American store and they are asking 45$ for shipping alone.
@Maverick, you lucky bastard.
Here is the XHP70 high CRI:
https://www.arrow.com/en/products/xhp70a-01-0000-0d0uj445g/cree
More info on how to improve on the LED to get it to Nichia levels:
https://www.reddit.com/r/flashlight/comments/7ubxuo/emitter_swap_shaved_90_cri_4500k_3step_easywhite/
Shave it, then use 800 grit to sand it down, then 2000 grit to polish it.
@Barkuti, no sorry. Unless you want to buy a reel of 800, that is almost impossible to buy XHP35HIs 90CRI.
You will have to buy an XHP35HI 80CRI instead:
http://www.kaidomain.com/p/S026109.Cree-XHP35-HI-C4-40E-Neutral-White-4000K-CRI80-LED-Emitter
Thank you! I will send an email to them asking about a shipping quote.
@Maverick, they have free international shipping on orders for a limited time. Hope you won’t get hit by monster customs fees.
Well, they answered my request. 38 US$ for shipping… the free international shipping is only for orders above 50$. So thats basically 48$ for a XHP70 90CRI LED… Guess I won’t be swapping my L6’s LED anytime soon. It was worth a shot, thank you. The search continues…
If I could get the bezel off of an ODF30 this would be a no brainer for me in the US.
I had this on my wishlist long ago, managed to find it out again: https://www.ebay.com/itm/Cree-XHP70-XLamp-LED-emitter-Nature-White-Chip-12V-on-20mm-Copper-Star-PCB-Board/311526015458
Pay attention to the ad order code: 30G K2
According to my XHP70 datasheet, a 30G group (3-step) K2 bin flux is a 90+CRI emitter. You may want to ask the seller to confirm this (ask him to show you the bin code sticker).
With regards to XHP35s, HD versions is allright. I have fine grit sandpaper. 
Cheers :-)