[♛ FreemeGB] ZANFLARE T1 350lm Rechargeable 18650 Tent Lamp Group Buy -【 ENDED 】

868 posts / 0 new
Last post
ggf31416
Offline
Last seen: 2 hours 59 min ago
Joined: 02/25/2016 - 17:38
Posts: 152
Location: Uruguay
freeme wrote:

About 400pcs sold for the past 2 months

If I’m still interested in the lantern should I wait for you to PM me a code or should I buy from the flash sale while there is still stock left?

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 8 hours 35 min ago
Joined: 03/24/2016 - 07:44
Posts: 7721
Location: Everything is brighter in Texas

If they made the base out of aluminum it should fix the overheating issue, maybe add a few mild fins to the base as well. Although this would increase the cost.

EDC2017
Offline
Last seen: 1 day 5 hours ago
Joined: 12/26/2017 - 21:08
Posts: 6
Location: Malaysia

Freeme,

Any updates on this deal?

penumbra
penumbra's picture
Offline
Last seen: 2 weeks 6 days ago
Joined: 11/10/2013 - 16:32
Posts: 450
Location: benelux

https://www.youtube.com/watch?v=FVtJrlFuEwQ

I have this lamp too ist bigger for sleeproom

JasonWW
JasonWW's picture
Offline
Last seen: 1 hour 3 min ago
Joined: 10/22/2016 - 11:41
Posts: 8309
Location: Houston Texas

penumbra wrote:
https://www.youtube.com/watch?v=FVtJrlFuEwQ

I have this lamp too ist bigger for sleeproom


Woah! So it’s a whole new model similar to the T1, but bigger that has RGB leds, a clock and speakers in it? Neat. Big Smile

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices 

Review Jaxmnve M1 Stainless 10180 Keychain light

penumbra
penumbra's picture
Offline
Last seen: 2 weeks 6 days ago
Joined: 11/10/2013 - 16:32
Posts: 450
Location: benelux

https://www.youtube.com/watch?v=4REbJILN__8

yes i like it you can set the color you wish on hold (+-16 € on ebay)

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 8 hours 35 min ago
Joined: 03/24/2016 - 07:44
Posts: 7721
Location: Everything is brighter in Texas

penumbra wrote:
https://www.youtube.com/watch?v=4REbJILN__8

yes i like it you can set the color you wish on hold (+-16 € on ebay)

It doesn’t look like it is battery powered? Only AC powered?

shirnask
Offline
Last seen: 1 hour 17 min ago
Joined: 03/21/2016 - 23:58
Posts: 524
Location: Louisiana

Texas_Ace wrote:
penumbra wrote:
https://www.youtube.com/watch?v=4REbJILN__8

yes i like it you can set the color you wish on hold (+-16 € on ebay)

It doesn’t look like it is battery powered? Only AC powered?

Integrated 3600ma battery and usb charging

Gearbest link

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 8 hours 35 min ago
Joined: 03/24/2016 - 07:44
Posts: 7721
Location: Everything is brighter in Texas

Very interesting, I have liked the few utorch’s I have seen.

Any reviews?

Any good codes?

JasonWW
JasonWW's picture
Offline
Last seen: 1 hour 3 min ago
Joined: 10/22/2016 - 11:41
Posts: 8309
Location: Houston Texas

Texas_Ace wrote:

I wounder if it has the same overheating issue as the T1?

This one’s output seems much lower. There’s also a lot less of any one color leds.

Oh, it’s way bigger as well. So that helps reduce heat.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices 

Review Jaxmnve M1 Stainless 10180 Keychain light

Coscar
Coscar's picture
Offline
Last seen: 6 hours 50 min ago
Joined: 01/03/2016 - 20:16
Posts: 354
Location: Gulf Coast

and I thought it was determined that the T1 didnt have heat issues unless using a defective battery …. did I miss something?

Im not a Pessimist …. just an Optimist with a lot of experience

tatasal
Offline
Last seen: 39 min 44 sec ago
Joined: 02/15/2012 - 08:40
Posts: 4507
Location: Far East
Coscar wrote:
and I thought it was determined that the T1 didnt have heat issues unless using a defective battery ….

Yes, even a ‘bad’ cell (high IR, etc.) will heat up substantially even when charged.

RobertB
RobertB's picture
Offline
Last seen: 33 min 4 sec ago
Joined: 12/18/2015 - 17:49
Posts: 2713
Location: USA, Michigan
Coscar wrote:
and I thought it was determined that the T1 didnt have heat issues unless using a defective battery …. did I miss something?

It doesn’t have heating problems.

JasonWW
JasonWW's picture
Offline
Last seen: 1 hour 3 min ago
Joined: 10/22/2016 - 11:41
Posts: 8309
Location: Houston Texas

Coscar wrote:
and I thought it was determined that the T1 didnt have heat issues unless using a defective battery …. did I miss something?

That’s pretty much the case it seems. It can heat a battery to around 50°C to 55°C. Most cells have an operating range of up to 60°C or 70°C depending on the cell.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices 

Review Jaxmnve M1 Stainless 10180 Keychain light

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 8 hours 35 min ago
Joined: 03/24/2016 - 07:44
Posts: 7721
Location: Everything is brighter in Texas
Coscar wrote:
and I thought it was determined that the T1 didnt have heat issues unless using a defective battery …. did I miss something?

I worded that badly.

It is still safe and does not appear to go over the limits of any of the components.

It does get unnecessarily hot due to a bad heat path though. I should of asked if this lantern has a better heat path.

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 6 hours 29 min ago
Joined: 07/22/2013 - 13:10
Posts: 3201
Location: Columbus, OH USA Earth

Look what I did… TCLO!

After another fishing trip last night where my T1 was half dead before even arriving at the secrete fishing spot cause it got turned on high in my bag I was determined to get TCLO working without use of a paper disk and I accomplished it with ~8” of Teflon pipe tape!

Always remember SPC Joey Riley, KIA 11/24/14.

Coscar
Coscar's picture
Offline
Last seen: 6 hours 50 min ago
Joined: 01/03/2016 - 20:16
Posts: 354
Location: Gulf Coast

That’s neat…. but I wonder how many screw/unscrew cycles before it needs to be redone?

Im not a Pessimist …. just an Optimist with a lot of experience

Cereal_killer
Cereal_killer's picture
Offline
Last seen: 6 hours 29 min ago
Joined: 07/22/2013 - 13:10
Posts: 3201
Location: Columbus, OH USA Earth

Even if it needs redone once a month it’s better than the other options [none] and a lifetime supply costs 99¢…

Always remember SPC Joey Riley, KIA 11/24/14.

rizky_p
rizky_p's picture
Offline
Last seen: 2 hours 53 min ago
Joined: 03/01/2011 - 05:06
Posts: 955
Location: Indonesia

any update on the next batch?

Sillen
Sillen's picture
Online
Last seen: 8 min ago
Joined: 08/01/2018 - 06:39
Posts: 267
Location: Melbourne, Australia

word

freeme
freeme's picture
Offline
Last seen: 3 hours 11 min ago
Joined: 11/14/2013 - 22:00
Posts: 6479
Location: freedailydeals.org

Previous sale rep left the company last month. I have yet to receive an answer from his successor. 

siata94
siata94's picture
Offline
Last seen: 4 days 4 hours ago
Joined: 05/13/2014 - 13:30
Posts: 423
Location: SoCal

I have 2 and like them, until one started acting up. It turned on by itself and no longer powers off. Neither are used much, couple hours each max total.

Coscar
Coscar's picture
Offline
Last seen: 6 hours 50 min ago
Joined: 01/03/2016 - 20:16
Posts: 354
Location: Gulf Coast
siata94 wrote:
I have 2 and like them, until one started acting up. It turned on by itself and no longer powers off. Neither are used much, couple hours each max total.

hmmm…. I have 3 T1s ….. 2 of them have been on 24/7(low/warm) since the first week of Aug except for charging every couple of weeks. No problems here.

Im not a Pessimist …. just an Optimist with a lot of experience

teacher
teacher's picture
Online
Last seen: 3 min 9 sec ago
Joined: 02/23/2016 - 19:04
Posts: 6319
Location: NE & SW Alabama

Nice one Cereal_killer, thanks for sharing!! . Thumbs Up

      You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"

       Texas Lumens Flashlights  <>   M4D M4X Deals : sign up - save $$$$    ||||

         Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU                   Flashaholic? Need Professional Help???   wink   /\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal                                                       

delete
Offline
Last seen: 1 day 10 min ago
Joined: 03/28/2017 - 23:42
Posts: 76

i read this treads in every log in. and wish the T1 will come on sale again.

JasonWW
JasonWW's picture
Offline
Last seen: 1 hour 3 min ago
Joined: 10/22/2016 - 11:41
Posts: 8309
Location: Houston Texas

delete wrote:
i read this treads in every log in. and wish the T1 will come on sale again.

I would maybe wait for version 2.0. This one could use a few tweaks to make it better.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70.2, 26350 cells (4,100 lumen!), Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices 

Review Jaxmnve M1 Stainless 10180 Keychain light

delete
Offline
Last seen: 1 day 10 min ago
Joined: 03/28/2017 - 23:42
Posts: 76

JasonWW wrote:
delete wrote:
i read this treads in every log in. and wish the T1 will come on sale again.

I would maybe wait for version 2.0. This one could use a few tweaks to make it better.

sound’s greats

Pages