(prototype) the GT Mini

754 posts / 0 new
Last post
Neal
Offline
Last seen: 52 min 55 sec ago
Joined: 08/19/2014 - 01:55
Posts: 142
Location: China
joker145 wrote:
still waiting for mine. emailed, no response yet, to get an update on when will it ship out.

pls send me your email address

Neal
Offline
Last seen: 52 min 55 sec ago
Joined: 08/19/2014 - 01:55
Posts: 142
Location: China

tracking sent

teacher
teacher's picture
Offline
Last seen: 21 min 25 sec ago
Joined: 02/23/2016 - 19:04
Posts: 5810
Location: NE & SW Alabama

@ JasonWW….

teacher wrote:
JasonWW wrote:
I got mine today in the USA so maybe the rest of the USA orders will show up soon.
That is some good info you posted Jason… thank you. Beer

Did the tracking info for yours ever update before it was delivered?

Any info appreciated my friend….. Wink

      You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"

       Texas Lumens Flashlights  <>   M4D M4X Deals : sign up - save $$$$    ||||

         Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU                   Flashaholic? Need Professional Help???   wink   /\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal                                                       

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

teacher wrote:

Did the tracking info for yours ever update before it was delivered?

Delta_V wrote:
For anyone in the USA who has received theirs, has your tracking info worked? Or did it just say processed in China and then show up at your door?

I’m sure all of ours will get here eventually, I’m just curious if I should even bother checking the tracking progress.


Mine was detailed and showed all the steps. The normal box was in another box inside a plastic envelope and was through Flyt Express. From China to Canada to Kentucky to Houston in 7 days. Neal may have chose a slightly faster shipping option for me, I’m not sure.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

teacher
teacher's picture
Offline
Last seen: 21 min 25 sec ago
Joined: 02/23/2016 - 19:04
Posts: 5810
Location: NE & SW Alabama

JasonWW wrote:
teacher wrote:

Did the tracking info for yours ever update before it was delivered?

Delta_V wrote:
For anyone in the USA who has received theirs, has your tracking info worked? Or did it just say processed in China and then show up at your door?

I’m sure all of ours will get here eventually, I’m just curious if I should even bother checking the tracking progress.


Mine was detailed and showed all the steps. The normal box was in another box inside a plastic envelope and was through Flyt Express. From China to Canada to Kentucky to Houston in 7 days. Neal may have chose a slightly faster shipping option for me, I’m not sure.
Thank you Jason…. Thumbs Up

That probably explains it. Mine is thru China EMS ePacket and has a Tracking Number in this format. LY51xxxxx88CN

      You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"

       Texas Lumens Flashlights  <>   M4D M4X Deals : sign up - save $$$$    ||||

         Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU                   Flashaholic? Need Professional Help???   wink   /\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal                                                       

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

Yeah, my tracking number started with F and had all numbers. So they will probably start showing up next week to the US.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

bunnicula
Offline
Last seen: 2 hours 10 min ago
Joined: 04/03/2017 - 06:33
Posts: 96

JasonWW wrote:
I got mine today in the USA so maybe the rest of the USA orders will show up soon.

Here are my measurements from a stock CW GT Mini using a Samsung 30Q.

Tail amps @30s using UT210E:

Top of ramp – 2.85A
Turbo – 5.5A
Parasitic drain normal – 0.18mA
Drain with switch led off- 0.02mA

Candela @30s and 10 meters using LX1330B:

GT Mini – 148kcd = 769m
Convoy C8 xm-l2 CW – 39kcd = 395m
Stock GT – 1.05mcd = 2,049m

Lumens using Texas_Ace Lumen Tube calibrated from Maukka’s S2 plus CW:

GT Mini:
Top of ramp:
turn on 720 lm
@30s 705 lm

Turbo:
turn on 1240 lm,
@30s 1200 lm

Convoy C8 xm-l2 CW
turn on 850 lm,
@30s 785 lm

I managed to measure 4.80-4.81A using the same meter (UT210E) and batt. The batt was around 4.10V before I started the reading. Tint used is also CW (stock config). I used an 11 AWG stranded copper wire to connect the negative terminal to the body.

mortuus
mortuus's picture
Offline
Last seen: 6 hours 22 min ago
Joined: 12/16/2014 - 09:33
Posts: 838
Location: Sweden
joker145 wrote:
still waiting for mine. emailed, no response yet, to get an update on when will it ship out.

all lights are shipped out days ago afaik, it depends where u live etc one day it will probably arrive at your door. Its weird JasonWW is in the US and got his light so others should get them also more or less this week…

...where Frugal meets with Flashlight!

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

mortuus wrote:
It’s weird JasonWW is in the US and got his light so others should get them also more or less this week…

I think Neal sent mine through a slightly faster shipping service, like 7 day express. The bulk of the US lights are probably using a cheaper, 14 day service like normal.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

mortuus
mortuus's picture
Offline
Last seen: 6 hours 22 min ago
Joined: 12/16/2014 - 09:33
Posts: 838
Location: Sweden
JasonWW wrote:
mortuus wrote:
It’s weird JasonWW is in the US and got his light so others should get them also more or less this week…
I think Neal sent mine through a slightly faster shipping service, like 7 day express. The bulk of the US lights are probably using a cheaper, 14 day service like normal.

well thats not fair is it? we all payed the same price ….

...where Frugal meets with Flashlight!

Nicolaas
Offline
Last seen: 2 days 6 hours ago
Joined: 10/31/2012 - 15:38
Posts: 423
Location: Netherlands

Nicolaas wrote:
Well, the bezel isn’t glued in my light, maybe just luck?

Anyhow, I did some tests today, using a 3 year old Efest purple INR2500 (I think the 2500 LG cell is in there).
So, not the latest and greatest cell there is but still!

Measured at 10m for easy calculations using my cheap LX1330B luxmeter I got:

At start @ turbo (double click) 135Kcd
After approx. 30 seconds 130Kcd
After 30 seconds at maximum ramping 78Kcd.

Mind you, using what is certainly not the best cell and my light is “NW”, but I would rather say it’s WW (same as with my GT).
It could very well be that using a truly CW led it does better.
The light gets quite hot very quickly so it looks like the heat transfer is good as well.

Cheers
Nico

As predicted I measured the light again, this time with a fresh and fully charged Sony VTC6.
I got 140Kcd at turbo and 81Kcd at max ramping.

And yes, this time I did deduct 64Lux ambient light in my basement……..

Which means that my previous measurement date should read ad follows:
I got 129Kcd at turbo and 72Kcd at max ramping (with the Efest INR2500)

Cheers,
Nico

teacher
teacher's picture
Offline
Last seen: 21 min 25 sec ago
Joined: 02/23/2016 - 19:04
Posts: 5810
Location: NE & SW Alabama

mortuus wrote:
JasonWW wrote:
mortuus wrote:
It’s weird JasonWW is in the US and got his light so others should get them also more or less this week…

I think Neal sent mine through a slightly faster shipping service, like 7 day express. The bulk of the US lights are probably using a cheaper, 14 day service like normal.
well thats not fair is it? we all payed the same price ….
No big deal… it is what it is. Smile

      You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"

       Texas Lumens Flashlights  <>   M4D M4X Deals : sign up - save $$$$    ||||

         Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU                   Flashaholic? Need Professional Help???   wink   /\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal                                                       

mortuus
mortuus's picture
Offline
Last seen: 6 hours 22 min ago
Joined: 12/16/2014 - 09:33
Posts: 838
Location: Sweden

I can see if lights shipped with a battery that can cause a delay or even wont be allowed but yea i hope all get their lights soon.

...where Frugal meets with Flashlight!

joechina
Online
Last seen: 5 min 11 sec ago
Joined: 03/05/2016 - 08:23
Posts: 1005
Location: Germany

JasonWW wrote:
timbuchanan wrote:
Using mode select (ie. not ramping) is 100% equivalent to turbo?

It depends on which mode set number you are using.

Modes 1-6 use the top of the ramp as 100%.

Modes 7-12 use full turbo as 100%.

You can download the manual here.

This is the manual that still says it uses a buck driver, just ignore that part.

Sorry Jason,
The GTmini has other modes settings than the big GT.
GTmini has also 50% as top of the ramp whereas a GT has 80%.
The linked manual from Madmax has errors in Modetable, 50% ramp, driver type and some different wording.

@timbuchanan
Yes, 100% in modes equal to TURBO

(was involved in the manual for the GTmini)

sovereignknight
sovereignknight's picture
Offline
Last seen: 6 days 5 hours ago
Joined: 01/18/2016 - 23:44
Posts: 485
Location: Northern California

Just placed an order for 1 GT Mini CW and 1 VTC6 via Neal’s Deals.

https://en.wikipedia.org/wiki/John_3:16 

Flashlights:

x6 Sk68 modded 3 Nichia 319AT, 3 Cree XP-G3 - x1 Solorforce P60 drop in custom XM-L2 U4 1C, Qlight Rev.A 7135*8 3.04A Driver - x2 Lumintop EDC05 CW - x2 Jaxman E2L tripple XP-G2 S4 
x1 Jaxman Z1 Zoomie, Cree MT-G2 Q0 LED - x1 Acebeam K40m thrower with MT-G2 Q0 LED - x1 Xintd SC-82 V5 Limited Edition C8, XM-L2 U4 1C, Qlight Rev.A 7135*8 3.04A Driver
x1 Convoy L6 moded with a Cree XHP-70.2 P2 1D LED - x1 Rare Olight x7 Maurauder with a Nuetral White LED - x1 Astrolux MF-01 Nichia 219c - x1 Astrolux MF-01 Cree XP-G3 - x2 Zebralight SC5w MKII  

x6 Lumintop Tool AA - x1  Olight i3E EOS - x2 Zebralight SC600w Plus MK IV XHP 50.2 4500k 80 CRI - x1 Fenix CL30R - x1 Lumintop C01 Bike Light

timbuchanan
Offline
Last seen: 3 days 15 hours ago
Joined: 06/12/2016 - 18:26
Posts: 56
Location: NZ

Joechina is there an accurate manual? I was having problems with the mode table last night

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

joechina wrote:
JasonWW wrote:
timbuchanan wrote:
Using mode select (ie. not ramping) is 100% equivalent to turbo?

It depends on which mode set number you are using.

Modes 1-6 use the top of the ramp as 100%.

Modes 7-12 use full turbo as 100%.

You can download the manual here.

This is the manual that still says it uses a buck driver, just ignore that part.

Sorry Jason,
The GTmini has other modes settings than the big GT.
GTmini has also 50% as top of the ramp whereas a GT has 80%.
The linked manual from Madmax has errors in Modetable, 50% ramp, driver type and some different wording.

@timbuchanan
Yes, 100% in modes equal to TURBO

(was involved in the manual for the GTmini)


I think your confused. I did not mention anything about the big GT or its manual.

I also don’t see any errors in my response as it’s straight from the GT manual.

UPDATE TO MANUAL

After trying mode 4 and mode 10 it appears that the groups are reversed.

Modes 1-6 use full turbo as 100% (5A)

Modes 7-12 use the top of the ramp as 100% (2.5A)

We definitely need an updated manual to reflect this.

Edit: And here it is.
GT Mini User Manaual
.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

timbuchanan wrote:
Joechina is there an accurate manual? I was having problems with the mode table last night

What problem did you have?

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

Newlumen
Newlumen's picture
Online
Last seen: 6 min 47 sec ago
Joined: 05/27/2017 - 00:19
Posts: 1297
Location: United states

JasonWW wrote:
joechina wrote:
JasonWW wrote:
timbuchanan wrote:
Using mode select (ie. not ramping) is 100% equivalent to turbo?

It depends on which mode set number you are using.

Modes 1-6 use the top of the ramp as 100%.

Modes 7-12 use full turbo as 100%.

You can download the manual here.

This is the manual that still says it uses a buck driver, just ignore that part.

Sorry Jason,
The GTmini has other modes settings than the big GT.
GTmini has also 50% as top of the ramp whereas a GT has 80%.
The linked manual from Madmax has errors in Modetable, 50% ramp, driver type and some different wording.

@timbuchanan
Yes, 100% in modes equal to TURBO

(was involved in the manual for the GTmini)


I think your confused. I did not mention anything about the big GT or its manual.

I also don’t see any errors in my response as it’s straight from the GT manual.

UPDATE TO MANUAL

After trying mode 4 and mode 10 it appears that the groups are reversed.

Modes 1-6 use full turbo as 100% (5A)

Modes 7-12 use the top of the ramp as 100% (2.5A)

We definitely need an updated manual to reflect this.

Edit: And here it is.
GT Mini User Manaual
.

I am lost.. you said mode 7-12 use full turbo.. you also said mode 1-6 use full turbo.. whats that??

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

Newlumen wrote:
JasonWW wrote:
joechina wrote:
JasonWW wrote:
timbuchanan wrote:
Using mode select (ie. not ramping) is 100% equivalent to turbo?

It depends on which mode set number you are using.

Modes 1-6 use the top of the ramp as 100%.

Modes 7-12 use full turbo as 100%.

You can download the manual here.

This is the manual that still says it uses a buck driver, just ignore that part.

Sorry Jason,
The GTmini has other modes settings than the big GT.
GTmini has also 50% as top of the ramp whereas a GT has 80%.
The linked manual from Madmax has errors in Modetable, 50% ramp, driver type and some different wording.

@timbuchanan
Yes, 100% in modes equal to TURBO

(was involved in the manual for the GTmini)


I think your confused. I did not mention anything about the big GT or its manual.

I also don’t see any errors in my response as it’s straight from the GT manual.

UPDATE TO MANUAL

After trying mode 4 and mode 10 it appears that the groups are reversed.

Modes 1-6 use full turbo as 100% (5A)

Modes 7-12 use the top of the ramp as 100% (2.5A)

We definitely need an updated manual to reflect this.

Edit: And here it is.
GT Mini User Manaual
.

I am lost.. you said mode 7-12 use full turbo.. you also said mode 1-6 use full turbo.. whats that??


I’m not saying either. I’ll edit my older post.

At first I went by the online manual for the GT Mini, but it was incorrect. Then I tried out both modes 4 and 10 on my light and found mode 4 used 5A and mode 10 used 2.5A. So something was fishy.

Then TA pointed me to the latest updated manual (v5) and it shows a whole new unique set of mode sets not seen in previous versions of NarsilM v1.2

You can use the link I posted to see the levels.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

Agro
Offline
Last seen: 1 hour 53 min ago
Joined: 05/14/2017 - 11:16
Posts: 2403
Location: Ślōnsk

M4D M4X wrote:

om my production NW i got:


4.70A nitecore NI18350A toomAh<br />4.95A Aspire 1300mAh 
5.25A keeppower IMR18350 (black) 750 mAh<br />5.60A shockli IMR 1150mAh


Is the Aspire cell new? Is that result repeatable?
So far I haven’t seen any evidence of the existence of another cell that would compete with Yong Deli (used by Aspire) when it comes to both capacity and internal resistance.
Now that Shockli actually seems to be something different…but I’m not yet convinced.

Also, the Shockli stated capacity is about what would I expect them to state if they used the YongDeli.

M4D M4X
M4D M4X's picture
Offline
Last seen: 2 hours 37 min ago
Joined: 03/19/2014 - 05:17
Posts: 6278
Location: Austria (GMT + 1)

is that correct?

find all available items in this list

i launched my new blog - all deals for members without MAP B$ Wink

find a short description about my idea here

 

if you want to buy a flashlight or battery for a better price: just send a mail - i will try to save you money!

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

Where did this come from?

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

M4D M4X
M4D M4X's picture
Offline
Last seen: 2 hours 37 min ago
Joined: 03/19/2014 - 05:17
Posts: 6278
Location: Austria (GMT + 1)

was posted to Neals facebook


 

find all available items in this list

i launched my new blog - all deals for members without MAP B$ Wink

find a short description about my idea here

 

if you want to buy a flashlight or battery for a better price: just send a mail - i will try to save you money!

JasonWW
JasonWW's picture
Offline
Last seen: 6 hours 7 min ago
Joined: 10/22/2016 - 11:41
Posts: 7094
Location: Houston Texas

I guess you would need to have a ROT66 to confirm its accuracy.

Some things I notice is that it says you can press and hold to get into the menu. They might have used 16 seconds in ramping, but it’s always best to ramp down to get into the menu. If your in mode sets it only takes about 3 seconds.

Of course, if you are in mode sets the menu is different. So maybe the diagram should be labeled (only in ramping mode) under the “16 seconds”.

There’s no mention of the mode sets menu or all the mode sets brightness level options (1-12). I guess this was on purpose to keep things simple.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware (old), lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well. 

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! 

9 NarsilM user videos for BLF Q8, GT, GT Mini and ROT66

Texas_Ace BLF Calibrated Lumen tube

Maukka Calibration Lights for DIY Lumen Measuring Devices

Brainsick67
Brainsick67's picture
Offline
Last seen: 3 hours 6 min ago
Joined: 06/09/2018 - 18:53
Posts: 59
Location: United States

nkresho wrote:
I got tracking 8/2 and a scan at “GUANGZHOU EMS” on the same day, just hasn’t moved in 7 days.

Looking forward to getting mine too.


Im in the US. Mine says the same..but shipped on the 3rd.
teacher
teacher's picture
Offline
Last seen: 21 min 25 sec ago
Joined: 02/23/2016 - 19:04
Posts: 5810
Location: NE & SW Alabama

Brainsick67 wrote:
nkresho wrote:
I got tracking 8/2 and a scan at “GUANGZHOU EMS” on the same day, just hasn’t moved in 7 days.

Looking forward to getting mine too.

Im in the US. Mine says the same..but shipped on the 3rd.
Yep… mine says 3rd too. Big Smile . Looks like they are all just sitting around waiting to leave.

Note to self….Maybe I won’t use EMS ePacket China again, given a choice that is. Big Smile . Wink

      You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"

       Texas Lumens Flashlights  <>   M4D M4X Deals : sign up - save $$$$    ||||

         Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU                   Flashaholic? Need Professional Help???   wink   /\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal                                                       

Delta_V
Offline
Last seen: 59 min 45 sec ago
Joined: 09/21/2017 - 15:25
Posts: 188

Mine just got updated from ‘processed through facility’ to ‘shipped’.

US order w/out batteries.

Brainsick67
Brainsick67's picture
Offline
Last seen: 3 hours 6 min ago
Joined: 06/09/2018 - 18:53
Posts: 59
Location: United States

teacher wrote:
Brainsick67 wrote:
nkresho wrote:
I got tracking 8/2 and a scan at “GUANGZHOU EMS” on the same day, just hasn’t moved in 7 days.

Looking forward to getting mine too.

Im in the US. Mine says the same..but shipped on the 3rd.
Yep… mine says 3rd too. Big Smile . Looks like they are all just sitting around waiting to leave.

Note to self….Maybe I won’t use EMS ePacket China again, given a choice that is. Big Smile . Wink

That blows..im sure we will get this or next week..i HOPE this week.
teacher
teacher's picture
Offline
Last seen: 21 min 25 sec ago
Joined: 02/23/2016 - 19:04
Posts: 5810
Location: NE & SW Alabama

Brainsick67 wrote:
teacher wrote:
Brainsick67 wrote:
nkresho wrote:
I got tracking 8/2 and a scan at “GUANGZHOU EMS” on the same day, just hasn’t moved in 7 days.

Looking forward to getting mine too.

Im in the US. Mine says the same..but shipped on the 3rd.
Yep… mine says 3rd too. Big Smile . Looks like they are all just sitting around waiting to leave.

Note to self….Maybe I won’t use EMS ePacket China again, given a choice that is. Big Smile . Wink

That blows..im sure we will get this or next week..i HOPE this week.
Yep…. it does. I agree, end of this week or more likely next. Wink

Look closely at the day & time of the last two 17Track entries for my order. Facepalm

It appears someone is confused….. Big SmileBig SmileBig Smile

2018-08-03 22:46
Guangzhou, leave Guangzhou send to Guangzhou courier company

2018-08-03 22:46
Guangzhou, leave Guangzhou and send to JFK Airport in New York.

      You never know how a horse will pull until you hook him up to a heavy load. / Paul "Bear" Bryant ~/~\~ "Slow is Smooth, Smooth is Fast"

       Texas Lumens Flashlights  <>   M4D M4X Deals : sign up - save $$$$    ||||

         Rudeness Level /\ mΩ /\ {width:70%} /\ LightWiki /\ LED Tint Chart /\ LED Tint Picture /\ Xlamp size chart /\ BatteryU                   Flashaholic? Need Professional Help???   wink   /\ TheOriginal /\ TAB /\ LightSearch /\ BatterySearch /\ 14500's /\ DiCal                                                       

Pages