[♛ FreemeGB] Fireflies PL47 Gen II 4*XP-L/ Nichia/ SST20 Hi CRI 21700 Right Angle Flashlight - ALIVE

2224 posts / 0 new
Last post
x-ray
Offline
Last seen: 1 day 18 hours ago
Joined: 08/17/2018 - 09:37
Posts: 114
Location: London

Interested

Eraursls1984
Offline
Last seen: 1 hour 49 min ago
Joined: 11/08/2014 - 01:44
Posts: 212
Location: North Florida

dmsoule wrote:
With Anduril firmware set up by Toykeeper, why would anyone want to flash something else?

A newer version of Anduril later on, of course.
takumi86
Offline
Last seen: 2 weeks 22 hours ago
Joined: 07/23/2018 - 02:41
Posts: 33
Location: North America

also interested, im on the quest to buy anything that toykeeper works on!

ZozzV6
ZozzV6's picture
Offline
Last seen: 3 days 12 hours ago
Joined: 03/24/2016 - 12:19
Posts: 2412
Location: Near to my soldering iron.

Interested

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 2 hours 16 min ago
Joined: 01/12/2013 - 14:40
Posts: 10347
Location: (469219) 2016 HO3

Before people get too excited, remember that it is first and foremost a 21700 right-angle light. If that is what you want, you’ll probably like it. But if you want a more traditional straight flashlight, a fancy interface won’t really help much. It’s kind of a specialized item.

The 219B emitters make a very nice pure-white high-CRI beam. And, though I may be a bit biased, I think it has a nice interface. But I use the ROT66 more because I like inline flashlights more than a right-angle lights.

Magnificus
Offline
Last seen: 2 months 2 weeks ago
Joined: 09/05/2016 - 19:08
Posts: 11

Interested.

Guns712
Offline
Last seen: 2 weeks 5 days ago
Joined: 05/06/2017 - 06:11
Posts: 66

Interested

lohtse
lohtse's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: 05/19/2017 - 04:18
Posts: 328
Location: UK

ToyKeeper wrote:
Before people get too excited, remember that it is first and foremost a 21700 right-angle light. If that is what you want, you’ll probably like it. But if you want a more traditional straight flashlight, a fancy interface won’t really help much. It’s kind of a specialized item.

The 219B emitters make a very nice pure-white high-CRI beam. And, though I may be a bit biased, I think it has a nice interface. But I use the ROT66 more because I like inline flashlights more than a right-angle lights.


Great Advice regarding choice etc..

For me both inline and angled Flashlights have a place due to work and activity requirements……. So hopefully this may replace the Nitecore HC30 I have but that will depend on quite a few things once I have played with one…. Could be it’s as much use as a chocolate teapot Big Smile

Just wish there was a few specs regarding runtimes and lumens!!

Caving, Climbing, Mountaineering, Kayaking, Diving etc any time anywhere!!! If you in the UK let me know and lets Play!
Current lighting
Olight X7R,M2R,S1 Baton,S10R Baton 3m,S2R 2, I1R EOS,SofirnC8T,Lenser P7'2,Lenser P14,BLF A6,Fenix HL50,HM50R,HL55,CL05,HL05,CL09,CL25,Nitecore HC30,HC65,NU12,NU32,Astolux K1,Petzl E-light,Tikka Xp3,XP3LED,DUO,Atomlight,Xtar Warboys H3,PL47 Manker E03H and many Chinese ones

electricjelly
electricjelly's picture
Offline
Last seen: 1 day 19 hours ago
Joined: 08/23/2012 - 03:39
Posts: 599
Location: Los Angeles

Interested

Frumious
Offline
Last seen: 9 months 2 weeks ago
Joined: 08/05/2018 - 00:52
Posts: 81

Might it come with a magnet on the base? That would increase its utility. (Sorry if someone else has asked this Q already)

noboneshotdog
Offline
Last seen: 1 hour 21 min ago
Joined: 05/12/2012 - 08:47
Posts: 597
Location: Hudson, New Hampshire
Frumious wrote:
Might it come with a magnet on the base? That would increase its utility. (Sorry if someone else has asked this Q already)

Yes

Thier ain’t no bones in a hot dog. F. York

cujo255
cujo255's picture
Offline
Last seen: 1 week 1 day ago
Joined: 02/27/2017 - 15:39
Posts: 87
Location: Minnesota

definitely interested

i42dk
i42dk's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: 08/30/2017 - 05:35
Posts: 199
Location: Denmark

interested !

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 2 hours 16 min ago
Joined: 01/12/2013 - 14:40
Posts: 10347
Location: (469219) 2016 HO3
lohtse wrote:
Just wish there was a few specs regarding runtimes and lumens!!

Lumens go from ~0.3 at the low end to … um, direct drive at the high end. It has four emitters and a FET and a 21700 cell, so it should be able to pretty much max out four of whatever emitter it’s using. So, for 219B that’s probably a maximum of 2000-2400 lm. For XP-L HI it probably goes up to ~4500 lm or maybe even higher.

Of course, it won’t stay at that level for long… too much heat.

Firelight2
Firelight2's picture
Offline
Last seen: 2 hours 49 min ago
Joined: 04/08/2011 - 15:17
Posts: 4031
Location: California

Interested

lohtse
lohtse's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: 05/19/2017 - 04:18
Posts: 328
Location: UK
ToyKeeper wrote:
lohtse wrote:
Just wish there was a few specs regarding runtimes and lumens!!

Lumens go from ~0.3 at the low end to … um, direct drive at the high end. It has four emitters and a FET and a 21700 cell, so it should be able to pretty much max out four of whatever emitter it’s using. So, for 219B that’s probably a maximum of 2000-2400 lm. For XP-L HI it probably goes up to ~4500 lm or maybe even higher.

Of course, it won’t stay at that level for long… too much heat.


Thank you for that Toykeeper…. Now I have a slight corner dribble!! Shocked

Caving, Climbing, Mountaineering, Kayaking, Diving etc any time anywhere!!! If you in the UK let me know and lets Play!
Current lighting
Olight X7R,M2R,S1 Baton,S10R Baton 3m,S2R 2, I1R EOS,SofirnC8T,Lenser P7'2,Lenser P14,BLF A6,Fenix HL50,HM50R,HL55,CL05,HL05,CL09,CL25,Nitecore HC30,HC65,NU12,NU32,Astolux K1,Petzl E-light,Tikka Xp3,XP3LED,DUO,Atomlight,Xtar Warboys H3,PL47 Manker E03H and many Chinese ones

saypat
saypat's picture
Offline
Last seen: 5 days 9 hours ago
Joined: 07/13/2011 - 20:32
Posts: 3579
Location: Calif

have interest…

SKV89
Offline
Last seen: 1 hour 34 min ago
Joined: 12/10/2017 - 12:46
Posts: 3898
Location: US
ToyKeeper wrote:
lohtse wrote:
Just wish there was a few specs regarding runtimes and lumens!!

Lumens go from ~0.3 at the low end to … um, direct drive at the high end. It has four emitters and a FET and a 21700 cell, so it should be able to pretty much max out four of whatever emitter it’s using. So, for 219B that’s probably a maximum of 2000-2400 lm. For XP-L HI it probably goes up to ~4500 lm or maybe even higher.

Of course, it won’t stay at that level for long… too much heat.

Wow I’m very excited for this. It’s like a Emisar D4 angle light.

I’m curious, if I put a 40T or 30T in there, will it push too much current for the 219B? How many amps does it take to be harmful to the 219B?

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 2 hours 16 min ago
Joined: 01/12/2013 - 14:40
Posts: 10347
Location: (469219) 2016 HO3

I wouldn’t recommend running it on turbo for long. The 219B emitters have higher Vf than 219C, so they won’t allow as much current to pass… but they also can’t stand anywhere near as much current. So I’m not really sure what to expect.

It might be a good idea to artificially lower the FET power on the 219B version, but it’ll require some testing to figure out if that’s necessary… and I’m not really set up for that kind of testing.

With most direct-drive lights, the emitters and batteries are chosen so the battery’s voltage sag and the emitter’s Vf curve will intersect at a safe point. But when using stronger cells or weaker emitters or lower-Vf emitters, things get tricky.

AEDe
AEDe's picture
Offline
Last seen: 15 hours 6 min ago
Joined: 12/01/2016 - 12:07
Posts: 616
Location: Moscow

Are xpl hi and 219B the only emitters available?

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 2 hours 16 min ago
Joined: 01/12/2013 - 14:40
Posts: 10347
Location: (469219) 2016 HO3

I don’t really know what emitters will be used.

However, the ones I’ve seen are 219B and SST20.

freeme
freeme's picture
Offline
Last seen: 7 hours 51 min ago
Joined: 11/14/2013 - 22:00
Posts: 8643

Product listed.

dmsoule
Offline
Last seen: 1 hour 25 min ago
Joined: 08/27/2016 - 20:14
Posts: 210
Location: MN USA
freeme wrote:

Product listed.

Nice, and lots of emitter options, including SST20 10W NW 4000K CRI95. Definitely going to try that.

http://www.ff-light.com/index.php?route=product/product&product_id=54

Freeme, please update my interest to two lights, thanks!

leaftye
Offline
Last seen: 6 days 1 hour ago
Joined: 07/25/2012 - 17:43
Posts: 4275
Location: San Diego, CA

The new details looks great. I thought I had posted interested before.

The low mode should be lower.

Reviews: Efan IMR18350 700mAh 10.5A, <a href="http://

lohtse
lohtse's picture
Offline
Last seen: 4 months 4 weeks ago
Joined: 05/19/2017 - 04:18
Posts: 328
Location: UK

2 please… YES THATS TWO PLEASE

Caving, Climbing, Mountaineering, Kayaking, Diving etc any time anywhere!!! If you in the UK let me know and lets Play!
Current lighting
Olight X7R,M2R,S1 Baton,S10R Baton 3m,S2R 2, I1R EOS,SofirnC8T,Lenser P7'2,Lenser P14,BLF A6,Fenix HL50,HM50R,HL55,CL05,HL05,CL09,CL25,Nitecore HC30,HC65,NU12,NU32,Astolux K1,Petzl E-light,Tikka Xp3,XP3LED,DUO,Atomlight,Xtar Warboys H3,PL47 Manker E03H and many Chinese ones

Dirt
Offline
Last seen: 2 months 6 days ago
Joined: 01/28/2016 - 23:17
Posts: 450

Prolly mentioned, gonna have battery available for purchase?

Xoroxronis
Xoroxronis's picture
Offline
Last seen: 10 months 4 days ago
Joined: 01/06/2018 - 13:23
Posts: 48

Interested

Wrathbringer27
Wrathbringer27's picture
Offline
Last seen: 1 day 7 hours ago
Joined: 03/02/2015 - 09:00
Posts: 2082
Location: Singapore GMT +8

Interested!

Words can be broken,
so can bones.

HONDARIDER
HONDARIDER's picture
Offline
Last seen: 3 months 1 week ago
Joined: 04/22/2018 - 11:45
Posts: 933
Location: Hot Springs, Arkansas

Interested. If I didn’t already say so. Facepalm

Nicolicous
Nicolicous's picture
Offline
Last seen: 39 min 27 sec ago
Joined: 04/16/2016 - 08:28
Posts: 1566
Location: Australia
freeme wrote:

Product listed.

gogogogogo

coupon Big Smile

Nico -.-

Pages