Driver compatibility for 2-AAA

2 posts / 0 new
Last post
BrokeModder
Offline
Last seen: 11 months 4 days ago
Joined: 09/23/2018 - 09:56
Posts: 2
Location: Groton, CT
Driver compatibility for 2-AAA

Hi all, new to the forum, I finally decided to take the next step in another hobby my wife doesn’t understand. I was thinking of repairing a 2-aaa light that was used by my friend for a year or so. After a couple voltage checks I found it has a burned led. He immediately donated the carcass to me. The driver still works but, if I’m changing things I’d like a driver with a couple modes and I’d like to keep it alkaline if possible. My question is would the mtn-11dd driver paired with a nichia 219b be appropriate hardware for running off 2 AAA alkalines? Suggestions on settings or other hardware appreciated. Thanks in advance

moderator007
moderator007's picture
Offline
Last seen: 29 min 53 sec ago
Joined: 12/23/2012 - 04:47
Posts: 2976
Location: North Carolina

2AAA’s is only 3v, so you’ll need a boost driver. The Mtn-11DD is a direct drive driver, which might actually light the led but not very brightly or for very long. Alkalines will also have a great deal of voltage sag under a heavy load.
One of these is probably your best option. http://www.mtnelectronics.com/index.php?route=product/product&product_id...
Should work with 2AAA’s.