Did a little reading on dedoming, seemed easy enough, thought I would try the “sit it in petrol for a few hours” method on my MT-G2.
After about 2 or 3 hours I thought it would be ready to go and gave the dome a little push with some tweezers. Part of the dome chipped off and I thought it just needed another push. Well I gave it another push and it ripped half the phosphor off. A quick test and sure enough its a puts out a horrible bright blue……
I have another but I’m not sure if I’m in the right state of mind to try again at the moment … might have to go for the slice method next time…
Man, this is painful to see. Torturing a MT-G2 like this :rage: I love the MT-G2 because of it’s creamy tint. It’s not a thrower.
With that said I bought a couple of de-domed MT-G2s from a user here who had a web shop. I mean, I liked the MT-G2 so much so I wanted to use it in other types pf lights. I instantly regretted it when I got them. They where no longer singing with that beautiful creamy tint, it was more like coughing and puking out greenish stuff. Poor things.
Then I tried slicing a bit of the dome of one for a slightly tighter beam. Maybe I sliced too much because it also affected tint a little. Nowhere near as much as de-dome, but enough to convince me to leave them be and use other LEDs for more throw. I’m now a strong believer that MT-G2s are best left alone. If you do something to the dome you ruin the very thing that makes them shine.
I’m building another spot light. This time with a 100mm aspheric. I don’t want a tiny little spot that illuminates a postage stamp 2km away. I like the mt-g2 in that it’s a much bigger spot.
Not UV but quite low in the spectre of visible light. I’ve put a dedome/trashed 219C in a zoomie.
It was fun for 5min but really dazzling to look at the beam.
Anyway, make fun with it
I will admit… that I always was “curious” what a LatticeBright “angry blue” XML clone did after petrol dedoming… I never had any oopsies doing petrol dedomes on “run of the mill” cree LEDs