[♛ FreemeGB] ASTROLUX MF01S 15000lm Flashlight Group Buy + Diffuser Cap - ALIVE

1403 posts / 0 new
Last post
aginthelaw
aginthelaw's picture
Offline
Last seen: 1 day 6 hours ago
Joined: 09/30/2014 - 21:31
Posts: 860
Location: noo joisey

i’m interested

really really really, gotta have it in red, 4000k, sst20

never fear shadows…it means a light shines nearby

Jaza
Offline
Last seen: 1 week 5 days ago
Joined: 08/01/2014 - 16:40
Posts: 125
Location: Finland

Interested

Relampago
Relampago's picture
Offline
Last seen: 1 week 3 days ago
Joined: 04/14/2019 - 11:44
Posts: 517

Interested

“Electricity is really just organized lightning”
― George Carlin

patmurris
patmurris's picture
Offline
Last seen: 2 days 34 min ago
Joined: 12/22/2014 - 15:54
Posts: 1417
Location: Nice, France

Interested.

However, i’ll wait for reviews before pulling the trigger. I got disappointed a couple time with new and promising Astrolux lights before, so i wont rush on this one – although i already have a V2 MF01 Nichia modded by Lexel with TA driver, Narsil and GITD tape under the optic, and it is one of my favorite lights. This new edition should be even better!

Where do we vote for colors?
I’d fancy tan or clear or gray…

Sirius9
Sirius9's picture
Offline
Last seen: 6 hours 36 min ago
Joined: 03/04/2012 - 19:23
Posts: 4591
Location: South Europe

Interested!

 

Primal
Primal's picture
Offline
Last seen: 1 day 10 hours ago
Joined: 07/17/2013 - 17:07
Posts: 119
Location: De Pere,Wisconsin

Interested

lopedevega
Offline
Last seen: 4 months 3 weeks ago
Joined: 06/16/2012 - 15:20
Posts: 124
Location: Toronto,Canada

Interested

D10ten
D10ten's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 07/13/2014 - 18:13
Posts: 322

I’m also interested in this

lroach
Offline
Last seen: 2 weeks 1 day ago
Joined: 01/19/2019 - 08:20
Posts: 19

Interested

LER

NMJoe
Offline
Last seen: 2 months 3 weeks ago
Joined: 03/30/2019 - 10:00
Posts: 37

Interested

Gj
Gj's picture
Offline
Last seen: 15 hours 10 min ago
Joined: 06/26/2013 - 15:44
Posts: 3046
Location: NY,USA

Interested, blue, silver(?).

Relampago
Relampago's picture
Offline
Last seen: 1 week 3 days ago
Joined: 04/14/2019 - 11:44
Posts: 517

I second a blue silver combo

“Electricity is really just organized lightning”
― George Carlin

charles lin
charles lin's picture
Offline
Last seen: 3 days 19 hours ago
Joined: 03/09/2016 - 17:08
Posts: 383
Location: SoCal, US

Interested!

pendo
Offline
Last seen: 3 months 1 week ago
Joined: 06/28/2016 - 17:52
Posts: 4

Interested for one, depending on pricing.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 13 hours 31 min ago
Joined: 03/24/2016 - 07:44
Posts: 8566
Location: Everything is brighter in Texas

I got the sample SST-20 LED’s in the other day and tested them out. The 6500k are CW but really good for that tint.

The 5000k are also great at med-high power levels and acceptable at low power levels, better then XP-G3 or the 219C’s they sent me before. The output is better as well.

We are still hunting down some 4000k 95cri SST-20’s from below the BBL. They are seriously hard to get, they might be a very limited quantity type of deal. Although the fall back are the normal FB4 tint that everyone else is using which are still good. I have been using these in my prototype for awhile now and it really works great.

scr79423
Offline
Last seen: 3 months 3 weeks ago
Joined: 04/29/2018 - 15:12
Posts: 177
Location: Bangkok, Thailand

I don’t care about HCRI even like others do, the SST20 6500K are the best SST20 tint IMO, I’m a huge fan of cool white, hope to see them make it into the production light! TA how many lumens and candelas did you measure with the 6500K?

Texas_Ace wrote:
I got the sample SST-20 LED’s in the other day and tested them out. The 6500k are CW but really good for that tint.

The 5000k are also great at med-high power levels and acceptable at low power levels, better then XP-G3 or the 219C’s they sent me before. The output is better as well.

We are still hunting down some 4000k 95cri SST-20’s from below the BBL. They are seriously hard to get, they might be a very limited quantity type of deal. Although the fall back are the normal FB4 tint that everyone else is using which are still good. I have been using these in my prototype for awhile now and it really works great.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 13 hours 31 min ago
Joined: 03/24/2016 - 07:44
Posts: 8566
Location: Everything is brighter in Texas

I didn’t install them in a light to get readings, I just bench tested them as it was too much of a pain to try them in a light for the test (I would never consider using a CW tint in an actual light of mine lol).

They beat the XP-G3 LEd’s and were not far off the XP-L HI numbers though.

scr79423
Offline
Last seen: 3 months 3 weeks ago
Joined: 04/29/2018 - 15:12
Posts: 177
Location: Bangkok, Thailand

will the production light be using the highest bin SST20s or what bin will they use?

Texas_Ace wrote:
I didn’t install them in a light to get readings, I just bench tested them as it was too much of a pain to try them in a light for the test (I would never consider using a CW tint in an actual light of mine lol).

They beat the XP-G3 LEd’s and were not far off the XP-L HI numbers though.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 13 hours 31 min ago
Joined: 03/24/2016 - 07:44
Posts: 8566
Location: Everything is brighter in Texas

It depends on the tint, they were able to get the highest bin in some of them and 1 below the highest in the rest. They are not positive which tints they will be offering in the final production lights yet.

Omega_17
Offline
Last seen: 5 hours 1 min ago
Joined: 06/02/2013 - 16:56
Posts: 910
Location: France

interested

Lexel
Lexel's picture
Offline
Last seen: 1 hour 27 min ago
Joined: 11/01/2016 - 08:00
Posts: 5529
Location: Germany

So basically the light is ready to be produced

but the Anduril thermal freak out bug is not fixed
hard turbo dropdown is just a think to do a hard stepdown to fix this bug, and we do not want it,
so that turbo is as long as possible available then fading down to a thermal equal level holding steady the set temperature

Damir-777
Offline
Last seen: 5 months 2 days ago
Joined: 10/20/2017 - 11:58
Posts: 30
Location: Russia

Interested !

Th558
Th558's picture
Offline
Last seen: 2 hours 39 min ago
Joined: 01/30/2016 - 16:19
Posts: 538
Location: United Kingdom

hella interested. It actually has cooling fins!

raccoon city
raccoon city's picture
Offline
Last seen: 7 hours 31 min ago
Joined: 10/06/2010 - 02:35
Posts: 13439
Location: रॅकून सिटी Palm Desert CA USA

Th558 wrote:

hella interested. It actually has cooling fins!

hella

bucky
Offline
Last seen: 2 months 3 weeks ago
Joined: 01/25/2018 - 20:41
Posts: 51
Location: Delaware

Interested

DAGG3R
Offline
Last seen: 3 hours 35 min ago
Joined: 04/26/2019 - 16:11
Posts: 58

Interested

Th558
Th558's picture
Offline
Last seen: 2 hours 39 min ago
Joined: 01/30/2016 - 16:19
Posts: 538
Location: United Kingdom

So the SST20s are 4000k? What kind output will we be seeing. 11000 lumen?

smokuxx1987
smokuxx1987's picture
Offline
Last seen: 1 week 2 days ago
Joined: 01/21/2017 - 18:23
Posts: 159
Location: Poland

Add me for a few blue .

Angel Martínez
Offline
Last seen: 3 hours 54 min ago
Joined: 11/19/2010 - 14:43
Posts: 155

Interested for one, depending on pricing.

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 13 hours 31 min ago
Joined: 03/24/2016 - 07:44
Posts: 8566
Location: Everything is brighter in Texas
Th558 wrote:
So the SST20s are 4000k? What kind output will we be seeing. 11000 lumen?

There will be multiple options for the LED’s. SST-20’s in 4000k 95cri (hopefully with a better bin then has been available before), 5000k 70cri and 6500k 70cri.

Far as lumen output, that is still TBD.

Pages