Convoy M2 XP-L HI, Need Help!

5 posts / 0 new
Last post
rikr
rikr's picture
Offline
Last seen: 10 hours 26 min ago
Joined: 09/03/2011 - 21:50
Posts: 2107
Location: Fenton, MO
Convoy M2 XP-L HI, Need Help!

I just got this light from FT and it says it has 12-group 55-modes, I read on another site you hit the switch 8 times to change modes. I am not having any luck. Any ideas? Thank you

BurningPlayd0h
BurningPlayd0h's picture
Offline
Last seen: 9 hours 47 min ago
Joined: 06/22/2018 - 02:16
Posts: 446
Location: MN

Try using the methods on this chart, the X-PL HI versions of the M2 should have Biscotti AFAIK:

rikr
rikr's picture
Offline
Last seen: 10 hours 26 min ago
Joined: 09/03/2011 - 21:50
Posts: 2107
Location: Fenton, MO

I finally got it, thank you

Marc E
Offline
Last seen: 13 hours 7 min ago
Joined: 05/18/2013 - 08:14
Posts: 183
Location: South West UK

8 isn’t enough, just keep going til the light stops responding (i just counted 10 as the diagram shows), it’ll then flash once followed by a burst of crazy strobe, then flash twice followed again by a crazy strobe.
If you click during the first crazy strobe you’ll toggle mode memory and the light come out of programming mode.
If you click during the second crazy strobe you’ll enter the menu to choose between the 12 sets of modes.

Edit:- Cross-posted, cool you got it sorted Smile

rikr
rikr's picture
Offline
Last seen: 10 hours 26 min ago
Joined: 09/03/2011 - 21:50
Posts: 2107
Location: Fenton, MO

Marc E wrote:
8 isn’t enough, just keep going til the light stops responding (i just counted 10 as the diagram shows), it’ll then flash once followed by a burst of crazy strobe, then flash twice followed again by a crazy strobe.
If you click during the first crazy strobe you’ll toggle mode memory and the light come out of programming mode.
If you click during the second crazy strobe you’ll enter the menu to choose between the 12 sets of modes.

Edit:- Cross-posted, cool you got it sorted Smile

Well I thought I had it, I went to use it today and it had all 8 modes, so I started to program it and it’s stuck in low mode and will not do anything else….