some LEDs from flashlight repairs from my customers
test bench XHP50 which had some while ago som dirt on dome and now burned itself deeply into the dome
dedome fail XHP70
first attempts of domepolish, washer too flat sanded bond wires through
Someone put 2 18350 in his modded Eagle Eye X6 and blew the bond wires
someone damaged his XPG3 in his Astrolux S42
XHP70.2 dedome fail, cutting the dome made ruptures in silicone all the way down to the die, polishing failed
fake Attiny85 from a China prototype driver unable to flash probably lock bit set
MF01 opening fail
Broken lens and damaged optic
Imalent driver spring fail
TA driver short abetween Ground and LED-pads through bad placed vises
Klarus G35 driver fail after a chip was on board shorting power between cap and MCU
broken driver very bad soldering jom, LED- wire fell off, bad soldering ground to pill, “spring” mess
fixed