Convoy C8+ Driver

13 posts / 0 new
Last post
rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO
Convoy C8+ Driver

I got a Convoy C8+ in and it won’t go into programming mode, is this the driver I need? QLITE REV.A 7135*8 3.04A LED DRIVER – 17mm

 

 

 New Collection / Old Collection

 
maukka
maukka's picture
Offline
Last seen: 3 hours 55 min ago
Joined: 12/31/2015 - 04:15
Posts: 1909
Location: Finland

You already started a thread about the issue.

Marc E
Offline
Last seen: 22 hours 4 min ago
Joined: 05/18/2013 - 08:14
Posts: 283
Location: South West UK

The driver that’s currently in there is this one:
https://www.aliexpress.com/store/product/7135×3-7135×4-7135×6-7135×8...

You can replace it with another 17mm 3V driver such as the QLITE one you mention but it will have a different interface and features which may or may not be desirable for you.
First though, have you spoken to the vendor you bought the light from about the fact it doesn’t work properly? Or to Simon Mao on here who ‘is’ Convoy?

rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO

Marc E wrote:
The driver that’s currently in there is this one:
https://www.aliexpress.com/store/product/7135×3-7135×4-7135×6-7135×8...

You can replace it with another 17mm 3V driver such as the QLITE one you mention but it will have a different interface and features which may or may not be desirable for you.
First though, have you spoken to the vendor you bought the light from about the fact it doesn’t work properly? Or to Simon Mao on here who ‘is’ Convoy?

I sent him a message but have not heard back. I rather have the one that comes in it, thank you. I contacted Banggood and they wanted me to send in a video and picture so I did that today.

 

 

 New Collection / Old Collection

 
rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO
maukka wrote:
You already started a thread about the issue.

This was asking what driver I needed.

 

 

 New Collection / Old Collection

 
raccoon city
raccoon city's picture
Online
Last seen: 1 min 56 sec ago
Joined: 10/06/2010 - 02:35
Posts: 13174
Location: रॅकून सिटी Palm Desert CA USA

I cannot see your pic in the OP.

It says, "Sorry.  This person moved or deleted this image."

Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 57 min ago
Joined: 10/18/2016 - 15:47
Posts: 1839
Location: Netherlands

What firmware did it come with?
Did you buy it from GB, BG or equivalent or from Simon’s official AE store?

If from Simon, shoot him a PM and he will arrange something, otherwise just spend a few bucks and replace the driver.
Just loosen the retaining ring, and solder 2 leads.

Budget Light Forum ...where Frugal meets with Flashlight!

 

WTS BLF GT

 

rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO
raccoon city wrote:

I cannot see your pic in the OP.


It says, “Sorry.  This person moved or deleted this image.”

I still see it there… I ordered one from Simons shop

 

 

 New Collection / Old Collection

 
Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 57 min ago
Joined: 10/18/2016 - 15:47
Posts: 1839
Location: Netherlands

Hmm in your other thread you just mentioned something else, i hope you realize that does detract your statements

http://budgetlightforum.com/comment/1501662#comment-1501662

Budget Light Forum ...where Frugal meets with Flashlight!

 

WTS BLF GT

 

rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO

Yokiamy wrote:
Hmm in your other thread you just mentioned something else, i hope you realize that does detract your statements

http://budgetlightforum.com/comment/1501662#comment-1501662

What do you mean?

I meant I ordered the driver from Simon, light came from Banggood..sorry

 

 

 New Collection / Old Collection

 
Yokiamy
Yokiamy's picture
Offline
Last seen: 1 hour 57 min ago
Joined: 10/18/2016 - 15:47
Posts: 1839
Location: Netherlands

In that case, sorry for my assumption.
Succes with the wait, replacing should be easy

Budget Light Forum ...where Frugal meets with Flashlight!

 

WTS BLF GT

 

rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO
Yokiamy wrote:
In that case, sorry for my assumption. Succes with the wait, replacing should be easy

No worries, I guess I didn’t make it clear on what I said I ordered lol

 

 

 New Collection / Old Collection

 
rikr
rikr's picture
Offline
Last seen: 2 weeks 1 day ago
Joined: 09/03/2011 - 21:50
Posts: 2160
Location: Fenton, MO

I can’t believe this… I went to use the Convoy M2 XP-L and it had all the 8 modes on, which I changed when I got it. So I went to program it and now it’s stuck in low mode and won’t do anything else..

 

 

 New Collection / Old Collection