Emisar D4V2 is available

290 posts / 0 new
Last post

Pages

Hank Wang
Online
Last seen: 14 min 23 sec ago
Joined: 10/19/2011 - 10:28
Posts: 347
Location: China
Emisar D4V2 is available

Emisar D4V2 is for sale now
https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

1. larger MCPCB with dedicated screws holes, so, 4 optic legs are in intact in the D4V2.
2. 7 aux LED colors options which is selectable through config UI, as well as the voltage indication function.
3. Knurling on the tube, magnet option in the tailcap, lanyard hole added.
4. anduril ui
There are a couple of other small improvements.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Edited by: Hank Wang on 06/19/2019 - 10:08
cgocela
Offline
Last seen: 2 weeks 3 days ago
Joined: 05/12/2019 - 21:28
Posts: 7
Location: hongkong

Excited and waiting for it

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 1 hour 18 min ago
Joined: 11/29/2017 - 12:34
Posts: 5338
Location: Canada

@Hank, are there differences in the driver circuit?

Is it a FET+1×7135 driver, or another type like the Emisar D4S?

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 20 hours 47 min ago
Joined: 12/28/2013 - 08:45
Posts: 2124
Location: Perth

Are the internal parts interchangeable with V1 ? Would like to stick it in my ti version.

pennzy
pennzy's picture
Offline
Last seen: 2 hours 55 min ago
Joined: 12/10/2017 - 19:45
Posts: 1358
Location: United States , Pa.

Recessed switch?

Hank Wang
Online
Last seen: 14 min 23 sec ago
Joined: 10/19/2011 - 10:28
Posts: 347
Location: China

BlueSwordM wrote:
@Hank, are there differences in the driver circuit?

Is it a FET+1×7135 driver, or another type like the Emisar D4S?

It’s still FET+1×7135 driver.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

oweban
oweban's picture
Offline
Last seen: 29 min 41 sec ago
Joined: 02/12/2019 - 06:34
Posts: 722
Location: Sydney AU

Daaaamn Hank!

Still all the same emitter options? SST20 helloooo

Jay
Offline
Last seen: 1 month 2 weeks ago
Joined: 07/02/2018 - 19:33
Posts: 104
Location: California

Will the new tail cap be compatible with the old D4?

bmengineer
bmengineer's picture
Offline
Last seen: 26 min 27 sec ago
Joined: 01/26/2018 - 11:38
Posts: 826
Location: Ontario, Canada

Looks great! Have you thought of making a single LED tube light with a smaller head? It would make a nice companion for people who want more throw without jumping up to the chunky D1

Find all my reviews of flashlights and more gear at www.bmengineer.com

zak.wilson
Offline
Last seen: 53 min 16 sec ago
Joined: 09/29/2014 - 14:27
Posts: 846

I’ve seen those pictures somewhere before….

Thanks for doing continuous quality improvement rather than continuous cost optimization like another popular multi-emitter FET driver light. It’s probably about time I bought an Emisar.

Ceilingbounce – flashlight testing and runtime graphs for Android

lotrbfme
lotrbfme's picture
Offline
Last seen: 1 day 2 hours ago
Joined: 12/05/2018 - 18:03
Posts: 321
Location: FL

Interesting

AlexGT
AlexGT's picture
Offline
Last seen: 1 hour 11 min ago
Joined: 06/07/2012 - 17:39
Posts: 4352
Location: Texas

What are the dimensions of the light? Are they the exact same as the previous version?

saypat
saypat's picture
Online
Last seen: 12 sec ago
Joined: 07/13/2011 - 20:32
Posts: 3473
Location: Calif

this will cost me! FANTASTIC!

mitsuki08
Offline
Last seen: 1 hour 32 min ago
Joined: 03/08/2019 - 05:36
Posts: 120
Location: Currently following the light

I just bought a D4 recently as well Facepalm . I guess it’s going to be an early Christmas when this goes on sale then.

trakcon
trakcon's picture
Offline
Last seen: 2 hours 58 min ago
Joined: 01/23/2019 - 15:50
Posts: 189

It looks great, Hank.

HONDARIDER
HONDARIDER's picture
Offline
Last seen: 3 days 12 hours ago
Joined: 04/22/2018 - 11:45
Posts: 902
Location: Hot Springs, Arkansas

Decent price @$45, may take me a while to collect the ones I want. I have several of the V1’s. There goes another couple hundred bucks. Emmiter options, auxiliary light options and color options. I’m doomed, at least my bank account is. Thanks Hank. Wink

charwinger21
Offline
Last seen: 1 week 23 hours ago
Joined: 02/25/2019 - 20:21
Posts: 41

Fantastic.

Are there any driver efficiency improvements as well?

The FW3A’s driver is quite popular, but Lumintop’s screwup by replacing the TIR+glass with an all-in-one plastic TIR might drive quite a few people to the Anduril D4 v2, especially if the D4 v2 does a better job of avoiding pocket activation than the original version.

contactcr
Online
Last seen: 3 min 35 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2766
Location: US

Does it still use Carclo optics or something else?

Vaxd
Offline
Last seen: 2 hours 6 min ago
Joined: 11/28/2018 - 01:45
Posts: 10

Will the magnetic tailcap be compatible with the d4v1?

korpzgrinda
korpzgrinda's picture
Offline
Last seen: 4 hours 3 min ago
Joined: 01/09/2017 - 16:52
Posts: 330
Location: Eastern Woodlands in the Wilderness of North America

Also, will the stainless bezel be compatible with the D4v1?

lightdecay
Offline
Last seen: 16 min 22 sec ago
Joined: 06/17/2019 - 08:55
Posts: 119
Location: U.S.A.

It would be great if a magnetic tail cap without the lanyard hole was also an option.

Also on my wish list: a 21700 tube.

alex64
alex64's picture
Online
Last seen: 9 min 35 sec ago
Joined: 03/16/2017 - 01:42
Posts: 113
Location: Balearic Islands

Has the latest version of Anduril from TK with the improved stepdown?

charwinger21
Offline
Last seen: 1 week 23 hours ago
Joined: 02/25/2019 - 20:21
Posts: 41
alex64 wrote:
Has the latest version of Anduril from TK with the improved stepdown?

I’m more excited for the dual stage lockout momentary (allowing for moon mode while in lockout by holding, and ~60 lumens while in lockout by double tapping and holding).

It’s still low enough that it won’t cause any major problems (beside battery drain), it’s unlikely to activate in your pocket, and it is bright enough to be useful.

 

Fingers crossed. TK messaged Hank about it 2 weeks ago when Anduril launched on the original D4 (that one was using one build version too early for dual brightness lockout momentary).

Ratus
Offline
Last seen: 3 months 2 days ago
Joined: 01/19/2016 - 17:30
Posts: 41
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.

Refugee from CPF and long time lurker on BLF.

Ratus_ on r/flashlight.

1536 on the GT List, Arrived 05-23-18

1271 on the FW3A List

 
 
xevious
xevious's picture
Offline
Last seen: 2 hours 5 min ago
Joined: 02/27/2013 - 21:55
Posts: 848
Location: Hoboken, NJ USA

Color me impressed. I’d passed over the D4 before… now, subscribed. Thumbs Up

How about a limited run with trit slots on the body and cap? Smile

charwinger21
Offline
Last seen: 1 week 23 hours ago
Joined: 02/25/2019 - 20:21
Posts: 41
Ratus wrote:
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.

I’m guessing it means “pick your aux LED colour when ordering, and then the settings for that one colour of aux LEDs are configurable on the light”, but I could be wrong.

edit: looks like I was wrong.

Hank Wang
Online
Last seen: 14 min 23 sec ago
Joined: 10/19/2011 - 10:28
Posts: 347
Location: China
Ratus wrote:
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.


Each light has all the colors, you can choose any color by any time through ui.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

charwinger21
Offline
Last seen: 1 week 23 hours ago
Joined: 02/25/2019 - 20:21
Posts: 41
Hank Wang wrote:
Ratus wrote:
Quote:
7 aux LED colors options which is selectable through config UI,

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.


Each light has all the colors, you can choose any color by any time through ui.

Colour me pleasantly surprised. Smile

Hank Wang
Online
Last seen: 14 min 23 sec ago
Joined: 10/19/2011 - 10:28
Posts: 347
Location: China

AlexGT wrote:
What are the dimensions of the light? Are they the exact same as the previous version?
The only size difference is the tailcap, which is 3mm longer than then D4V1 tailcap, due to the magnet space.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Hank Wang
Online
Last seen: 14 min 23 sec ago
Joined: 10/19/2011 - 10:28
Posts: 347
Location: China

alex64 wrote:
Has the latest version of Anduril from TK with the improved stepdown?
It’s with the latest anduril ui from TK.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Hank Wang
Online
Last seen: 14 min 23 sec ago
Joined: 10/19/2011 - 10:28
Posts: 347
Location: China

korpzgrinda wrote:
Also, will the stainless bezel be compatible with the D4v1?
Most likely, it should be compatiable, but we are not able to 100% sure since there are many different batches for the D4V1.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Pages