Noctigon K1 green & D4V2 cyan in stock

2212 posts / 0 new
Last post
HKSJOSHUA_
HKSJOSHUA_'s picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 06/28/2019 - 01:25
Posts: 118
Location: OKC

Does anyones d4v2 make a high frequency noise on high? Also the noise is not so loud on turbo

BTW this is with a samsung 20R It does not make this noise with an 18350 efest V2 High drain

Appreciate all the little things in life!

BurningPlayd0h
BurningPlayd0h's picture
Offline
Last seen: 9 hours 39 min ago
Joined: 06/22/2018 - 02:16
Posts: 1482
Location: MN

HKSJOSHUA_ wrote:
Does anyones d4v2 make a high frequency noise on high? Also the noise is not so loud on turbo BTW this is with a samsung 20R It does not make this noise with an 18350 efest V2 High drain

Do you have a magnetic tail cap installed? Does it do it with the non-magnetic one as well?

Some of the talk around the issue was EM fields interfering and making magnetic tail or other small parts vibrate or resonate.

HKSJOSHUA_
HKSJOSHUA_'s picture
Offline
Last seen: 2 months 3 weeks ago
Joined: 06/28/2019 - 01:25
Posts: 118
Location: OKC

No magnetic tailcap I did not get it because I have a d4s with one to work on stuff with

I’ve done some research and it seems it’s quite commonplace wuth these lights having inductors

Appreciate all the little things in life!

G.P.
G.P.'s picture
Offline
Last seen: 2 weeks 3 days ago
Joined: 11/11/2018 - 12:49
Posts: 83
Location: Canada

Has anybody had any luck putting the V2 stainless bezel on a V1 light?

I have a V1 and V2. The aluminum bezels can be easily swapped between the two. Stainless bezel threads onto the V2 easily, but won’t thread onto the V1. It goes on approx 1 turn and then stops, as if it’s the wrong thread pitch. I don’t think the threads are different though because the aluminum bezels interchange without an issue.

Question
bmengineer
bmengineer's picture
Offline
Last seen: 14 hours 25 min ago
Joined: 01/26/2018 - 11:38
Posts: 1017
Location: Ontario, Canada

G.P. wrote:
Has anybody had any luck putting the V2 stainless bezel on a V1 light?

I have a V1 and V2. The aluminum bezels can be easily swapped between the two. Stainless bezel threads onto the V2 easily, but won’t thread onto the V1. It goes on approx 1 turn and then stops, as if it’s the wrong thread pitch. I don’t think the threads are different though because the aluminum bezels interchange without an issue.

Question

Are the threads trapezoidal in the V2 head and triangular in the V1 head?

Find all my reviews of flashlights and more gear at www.bmengineer.com

ZozzV6
ZozzV6's picture
Offline
Last seen: 3 weeks 21 hours ago
Joined: 03/24/2016 - 12:19
Posts: 2422
Location: Near to my soldering iron.

I have an Early Cyan V1 and a V2 and neither the aluminum or stainless bezel from V2 not fit on my cyan V1.

G.P.
G.P.'s picture
Offline
Last seen: 2 weeks 3 days ago
Joined: 11/11/2018 - 12:49
Posts: 83
Location: Canada

bmengineer wrote:
G.P. wrote:
Has anybody had any luck putting the V2 stainless bezel on a V1 light?

I have a V1 and V2. The aluminum bezels can be easily swapped between the two. Stainless bezel threads onto the V2 easily, but won’t thread onto the V1. It goes on approx 1 turn and then stops, as if it’s the wrong thread pitch. I don’t think the threads are different though because the aluminum bezels interchange without an issue.

Question

Are the threads trapezoidal in the V2 head and triangular in the V1 head?


That could be it. The threads do look a little different.
djozz
djozz's picture
Online
Last seen: 11 min 45 sec ago
Joined: 09/07/2012 - 17:04
Posts: 17199
Location: Amsterdam

I have been carrying the D4V2 with raised switch ring in my front pants pocket all day long for one week now and just got my first spontaneous activation. This is much better than the V1 (with flat switch ring) that went nuclear twice in the first day. The max ramp of my V2 was set at 450 lumen so when I felt it warming up there was plenty time to notice and switch it off again.
This is what else is in the pocket:

contactcr
Offline
Last seen: 11 hours 51 min ago
Joined: 05/19/2017 - 18:52
Posts: 3436
Location: US

Did you secretly sand your C01S down?

djozz
djozz's picture
Online
Last seen: 11 min 45 sec ago
Joined: 09/07/2012 - 17:04
Posts: 17199
Location: Amsterdam

contactcr wrote:
Did you secretly sand your C01S down?

No, this is the no-ano low-high version, it polishes itself to a nice shine having been in my pants for a few months.
Rexlion
Offline
Last seen: 1 day 4 hours ago
Joined: 05/18/2019 - 16:59
Posts: 786
Location: Okla.

djozz wrote:
I have been carrying the D4V2 with raised switch ring in my front pants pocket all day long for one week now and just got my first spontaneous activation. This is much better than the V1 (with flat switch ring) that went nuclear twice in the first day. The max ramp of my V2 was set at 450 lumen so when I felt it warming up there was plenty time to notice and switch it off again.
This is what else is in the pocket:

!{width:80%}https://i.imgur.com/RygPHNu.jpg!

Quite a bit of stuff! That must create an interesting bulge in your pants….
KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 04/11/2014 - 18:05
Posts: 4224
Location: The Motor City

DJozz you EDC a pencil sharpener?

KB1428 “Live Life WOT

contactcr
Offline
Last seen: 11 hours 51 min ago
Joined: 05/19/2017 - 18:52
Posts: 3436
Location: US
KawiBoy1428 wrote:
DJozz you EDC a pencil sharpener?

Family board game night EDC.

saypat
saypat's picture
Offline
Last seen: 10 hours 11 min ago
Joined: 07/13/2011 - 20:32
Posts: 3579
Location: Calif

where is the pool cue???

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 6 days 16 hours ago
Joined: 11/29/2017 - 12:34
Posts: 5544
Location: Canada

Sand’s natural fine polish is fine sand.

My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547

djozz
djozz's picture
Online
Last seen: 11 min 45 sec ago
Joined: 09/07/2012 - 17:04
Posts: 17199
Location: Amsterdam
contactcr wrote:
KawiBoy1428 wrote:
DJozz you EDC a pencil sharpener?

Family board game night EDC.


I do, I’m a teaching assistent in secondary school, in biology class we do pencil drawings of biological subjects regularly and I insist on sharp pencils Big Smile
KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 5 hours 6 min ago
Joined: 04/11/2014 - 18:05
Posts: 4224
Location: The Motor City
djozz wrote:
contactcr wrote:
KawiBoy1428 wrote:
DJozz you EDC a pencil sharpener?

Family board game night EDC.


I do, I’m a teaching assistent in secondary school, in biology class we do pencil drawings of biological subjects regularly and I insist on sharp pencils Big Smile

mmm kay… I can see this Smile I watched Big Bang Theory before….. Wink Thumbs Up

KB1428 “Live Life WOT

Chronoscape
Offline
Last seen: 5 months 3 days ago
Joined: 06/25/2019 - 13:46
Posts: 28

Love my D4V2 it’s a fantastic light. However, I opted for the SST-20 5000k hoping for max power and throw, which it definitely delivers on high/turbo. Sadly as others have reported the tint is super green at anything less than about 80% brightness. It’s ugly.

I love the SST-20 4000k emitters in my D4S and FW3A tint-wise, though they are not quite as blisteringly bright.

Now I might just have to order another D4V2 with XPL-HI 3A emitters.

Figgy
Figgy's picture
Offline
Last seen: 4 months 1 week ago
Joined: 02/19/2019 - 11:47
Posts: 48

I wish Hank made it in titanium too

Hank Wang
Offline
Last seen: 40 min 34 sec ago
Joined: 10/19/2011 - 10:28
Posts: 511
Location: China

Figgy wrote:
I wish Hank made it in titanium too
Yes, there will be cooper + titanium D4V2 Ti with the switch backlight.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Figgy
Figgy's picture
Offline
Last seen: 4 months 1 week ago
Joined: 02/19/2019 - 11:47
Posts: 48
Hank Wang wrote:
Figgy wrote:
I wish Hank made it in titanium too
Yes, there will be cooper + titanium D4V2 Ti with the switch backlight.

on the site could you please add a 26350 battery to be able to buy it too? I mean you only letting us buy the 26650 so yep Smile

Hell yeah.. and I hope you can make the d1s-v2 with a short tube that we can actually put a 18350 and a plastic tube to make the battery not shake around pleease i know it looks silly but there are few of us that like silly things Silly

Hank Wang
Offline
Last seen: 40 min 34 sec ago
Joined: 10/19/2011 - 10:28
Posts: 511
Location: China
Figgy wrote:
Hank Wang wrote:
Figgy wrote:
I wish Hank made it in titanium too
Yes, there will be cooper + titanium D4V2 Ti with the switch backlight.

on the site could you please add a 26350 battery to be able to buy it too? I mean you only letting us buy the 26650 so yep Smile
Silly

The 26350 tube can be purchased here,
https://intl-outdoor.com/components-6/gears/emisar-d4s-26350-tube.html

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

heatwaves
Offline
Last seen: 3 months 4 days ago
Joined: 01/08/2017 - 14:16
Posts: 133
Location: United States
Hank Wang wrote:
Figgy wrote:
I wish Hank made it in titanium too
Yes, there will be cooper + titanium D4V2 Ti with the switch backlight.

Very excited about this! Any general ETA on availability?

Hank Wang
Offline
Last seen: 40 min 34 sec ago
Joined: 10/19/2011 - 10:28
Posts: 511
Location: China

Should be on October.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

saypat
saypat's picture
Offline
Last seen: 10 hours 11 min ago
Joined: 07/13/2011 - 20:32
Posts: 3579
Location: Calif
Hank Wang wrote:
Figgy wrote:
I wish Hank made it in titanium too
Yes, there will be cooper + titanium D4V2 Ti with the switch backlight.


oh please no! I won’t be able to resist.

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 3 hours 36 min ago
Joined: 01/12/2013 - 14:40
Posts: 10611
Location: (469219) 2016 HO3
Hank Wang wrote:
Figgy wrote:
I wish Hank made it in titanium too

Yes, there will be copper + titanium D4V2 Ti with the switch backlight.

I want one of those in XP-L HI 3A, 3D, 4A, or 4D. I got to see a preview, and it’s really nice. Smile

The switch backlight is a good change. It must be quite difficult to assemble these though, with so many wires in such a small space.

ikkentobi
Offline
Last seen: 11 hours 16 min ago
Joined: 11/18/2016 - 13:02
Posts: 80
Location: Bavaria

I am excited about this too. Unlikely that I will be able to resist.

Gunga
Gunga's picture
Offline
Last seen: 20 min 13 sec ago
Joined: 11/28/2014 - 16:56
Posts: 1892
Location: Vancouver, Canada

Is it super heavy like v1? I was not a fan of that.

ToyKeeper
ToyKeeper's picture
Offline
Last seen: 3 hours 36 min ago
Joined: 01/12/2013 - 14:40
Posts: 10611
Location: (469219) 2016 HO3
Gunga wrote:
Is it super heavy like v1?

It’ll probably weigh about the same as the titanium+copper V1 did. Both materials weigh more than aluminum.

Titanium can be made to weigh less, but only because it is stronger so the material can be thinner without sacrificing structural integrity. But when the size and shape are the same, titanium is heavier than aluminum.

Aluminum is probably more practical most of the time. So, for practical purposes, I would configure the D4v2 to be black or grey aluminum with a steel bezel and pocket clip, with XP-L HI 3A. That is my favorite version currently sold in the store.

Gunga
Gunga's picture
Offline
Last seen: 20 min 13 sec ago
Joined: 11/28/2014 - 16:56
Posts: 1892
Location: Vancouver, Canada

Yes. I’m an aware of the material properties, but I didn’t realize how much material was in the light in v1 until I got ti/cu. It was the super heavy. I’ll pass on v2 of it’s basically the same weight.

Pages