26mm 12V copper DTP MCPCB for XHP50/XHP70 ?

3 posts / 0 new
Last post
80T
80T's picture
Offline
Last seen: 2 hours 38 min ago
Joined: 01/24/2019 - 18:11
Posts: 83
Location: Romania/Ireland
26mm 12V copper DTP MCPCB for XHP50/XHP70 ?

Hi there,

 

Does anyone have any clue as where I could find a good 12V copper DTP MCPCB for an XHP50 or XHP70 to fit inside of a Manker U23 ? I seem to have hit a concrete wall at this point finding such a thing on the internet Flat Stare

 

Regards.

Lux-Perpetua
Lux-Perpetua's picture
Online
Last seen: 6 min 20 sec ago
Joined: 03/01/2018 - 04:39
Posts: 1419
Location: Germany, 德国, ドイツ, Германия, जर्मनी

I'm not sure where you could get a 12V MCPCB but you can buy the 6V 5050 (XHP50.2) MCPCB in 26mm on Sofirn's AliExpress shop. This board is part of the Sofirn SP33. As it is an individual request you need to send a message to the seller asking for this board. They will eventually answer and tell you the price (approx. $ 2,00 per MCPCB).

80T
80T's picture
Offline
Last seen: 2 hours 38 min ago
Joined: 01/24/2019 - 18:11
Posts: 83
Location: Romania/Ireland

Lux-Perpetua wrote:

I'm not sure where you could get a 12V MCPCB but you can buy the 6V 5050 (XHP50.2) MCPCB in 26mm on Sofirn's AliExpress shop. This board is part of the Sofirn SP33. As it is an individual request you need to send a message to the seller asking for this board. They will eventually answer and tell you the price (approx. $ 2,00 per MCPCB).

 

Hi Lux,

 

Thanks for the info, I'll try asking Sofirn if they have a 12V version of that MCPCB on their AliExpress store page as the 6V wouldn't help me.

 

Cheers!