SOLD: FW3A w/ 219B sw45k 9080, latest Anduril, blue glow

12 posts / 0 new
Last post
contactcr
Online
Last seen: 14 min 15 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2064
Location: US
SOLD: FW3A w/ 219B sw45k 9080, latest Anduril, blue glow

FW3A with mods

$OLD shipped, US only priority flat rate mail

  • Nichia 219B sw45k 9080
  • Latest Anduril with manual memory, 2 mode lockout brightness, FET limited for 219B
  • Blue 3D printed glow gasket (needs charging from light and fades quickly with time, not aux LEDs)
  • Dark coated clip from first batch
  • Carclo 10511 Frosted Narrow optic
  • FW3A stock AR glass lens

Edited by: contactcr on 07/11/2019 - 13:39
SvenWalker
Offline
Last seen: 5 hours 40 min ago
Joined: 12/04/2018 - 18:11
Posts: 25
Location: BC, Mexico

I’d be interested if it’s still available

contactcr
Online
Last seen: 14 min 15 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2064
Location: US

If you have a US address. I ship everything tracked and insured and it’s too much otherwise.

SvenWalker
Offline
Last seen: 5 hours 40 min ago
Joined: 12/04/2018 - 18:11
Posts: 25
Location: BC, Mexico

I do have an US address, don’t worry. Do we proceed through PM?

electricjelly
electricjelly's picture
Offline
Last seen: 3 hours 17 min ago
Joined: 08/23/2012 - 03:39
Posts: 517
Location: Los Angeles

I’ll take seconds if first falls through

Chatika vas Paus
Offline
Last seen: 5 hours 32 min ago
Joined: 09/03/2017 - 13:46
Posts: 417
contactcr wrote:
2 mode lockout brightness

What’s this?

oweban
oweban's picture
Offline
Last seen: 40 min 7 sec ago
Joined: 02/12/2019 - 06:34
Posts: 597
Location: Sydney AU
Chatika vas Paus wrote:
contactcr wrote:
2 mode lockout brightness

What’s this?


New in recent versions of Andùril – in lockout mode, click and hold for low mode, or click, click and hold for higher (usually second ramp lower end). Pretty nifty.

Most likely needs reflashing as I don’t believe any of the lights people have in the hands have that version yet from the factory.

contactcr
Online
Last seen: 14 min 15 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2064
Location: US

SPF to Sven.

oweban the very latest batch has the 2 mode lockout stock but not the other stuff. I did compile and reflash this version to get that.

oweban
oweban's picture
Offline
Last seen: 40 min 7 sec ago
Joined: 02/12/2019 - 06:34
Posts: 597
Location: Sydney AU

Good to hear they’re flashing newer hexes at the factory now Smile and yep I think I’m on the 2019-06-02 version on both mine.

nobody
Offline
Last seen: 4 days 4 hours ago
Joined: 01/12/2019 - 04:58
Posts: 117
Location: In the dark

I’d take it if the other two don’t work out. 

aginthelaw
aginthelaw's picture
Offline
Last seen: 1 hour 26 min ago
Joined: 09/30/2014 - 21:31
Posts: 760
Location: noo joisey

Are you printing the glow gaskets yourself or did you get them from neal?

never fear shadows…it means a light shines nearby

contactcr
Online
Last seen: 14 min 15 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2064
Location: US

Light is SOLD now. Thanks everyone.

aginthelaw wrote:
Are you printing the glow gaskets yourself or did you get them from neal?

I bought this and few XHP70 centering rings a while ago from a person who prints them from a 3D printer.