CRXs BIG BRASS NUTZ

16 posts / 0 new
Last post
CRX
CRX's picture
Offline
Last seen: 33 min 39 sec ago
Joined: 04/02/2013 - 15:27
Posts: 3828
Location: Scotland
CRXs BIG BRASS NUTZ

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver - 18650 - Fw Clicky Sw - 3200lm.CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.Hand made
Copper & brass construction, triple layered
Triple Luxeon v2 5000K emitters
Noctigon copper DTP MCPCB
22mm x 2mm ARC glass
Carclo 10511 TIR optic
Green GITD glow gasket
Copper pill
MTN FET Driver (GuppyDrv1)
Copper lined & sprung battery tube
Copper switch enclosure
15A Forward clicky tail switch (djozz test)
Rubber switch boot with copper button cover
Glass covered 10mm x 2.5mm green tritium vial
Green GITD hex switch surround

Max - 3200lm
cd - 6800 - 165m throw
Length - 109mm
Width - 30mm/ 34mm
Weight - 400g (With 18650 cell)CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.Made from some 3/4" brass threaded tube, 30mm brass couplers, brass sheet, 28mm and 21mm copper tube.
This light is a bit of a monster, my heaviest build yet weighing in at four hundred grams.CRX Big Brass Nutz runtime graph:
(Still need to do the 40% test)

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.

Oxidized.CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.

CRX BIG BRASS NUTZ Triple Luxeon v2 5000K - MTN FET Driver   - 18650 - Fw Clicky Sw - 3200lm.

Edited by: CRX on 10/30/2019 - 16:54
Binford
Offline
Last seen: 2 months 2 days ago
Joined: 07/31/2019 - 16:07
Posts: 102

Sometimes I wonder whether you have a real job Wink Or do you just design, develop, engineer and craft flashlights all day Big Smile

These are wonderful! Thank you for sharing.

DavidEF
DavidEF's picture
Offline
Last seen: 4 hours 27 min ago
Joined: 06/05/2014 - 06:00
Posts: 7680
Location: Salisbury, North Carolina, USA

Binford wrote:
Sometimes I wonder whether you have a real job Wink Or do you just design, develop, engineer and craft flashlights all day Big Smile

These are wonderful! Thank you for sharing.


Same. Silly

The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy

MRsDNF
MRsDNF's picture
Offline
Last seen: 2 hours 52 min ago
Joined: 12/22/2011 - 21:18
Posts: 12999
Location: A light beam away from the missus in the land of Aus.
Thumbs Up

 

djozz quotes, "it came with chinese lettering that is chinese to me".

                      "My man mousehole needs one too"

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

mattlward
mattlward's picture
Offline
Last seen: 6 hours 38 min ago
Joined: 06/19/2015 - 09:20
Posts: 2715
Location: Illinois, USA

The industrial look and feel of so many of the builds just sets them apart. Excellent work again!

EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
S2+, XM-L2 T6 4C

CRX
CRX's picture
Offline
Last seen: 33 min 39 sec ago
Joined: 04/02/2013 - 15:27
Posts: 3828
Location: Scotland

I’ve been working on this one over the last few weeks.

Scientist
Scientist's picture
Offline
Last seen: 11 hours 23 min ago
Joined: 07/24/2017 - 13:33
Posts: 199
Location: Out standing in my field

Is that a smear of the blood of the artist I see on the “bezel” nut? Another fantastic build.

Please illuminate responsibly

CRX
CRX's picture
Offline
Last seen: 33 min 39 sec ago
Joined: 04/02/2013 - 15:27
Posts: 3828
Location: Scotland

Red pen, but there is usually blood involved Big Smile

MtnDon
MtnDon's picture
Offline
Last seen: 4 hours 35 min ago
Joined: 08/27/2015 - 18:25
Posts: 2486
Location: Canuk in NM
Thumbs Up Nicely done!!

BLF Member Map Add your name and location.

pinkpanda3310
pinkpanda3310's picture
Offline
Last seen: 8 hours 43 min ago
Joined: 12/28/2013 - 08:45
Posts: 2169
Location: Perth

Nice work, again Thumbs Up

Gebe
Offline
Last seen: 1 day 14 hours ago
Joined: 05/11/2013 - 17:04
Posts: 763
Location: State Of Jefferson

I hate to admit it CRX but you are a somewhat talented Scotsman! I am a “Knucklehead” that really admires your work.

I have one of your earlier Brass Nutz and it’s brilliant and one of my all time favorite lights.

Does your inspiration come from your constant consumption of great Scottish whiskey or your Scots penny-pinching?

MascaratumB
MascaratumB's picture
Offline
Last seen: 42 min 35 sec ago
Joined: 10/29/2016 - 12:12
Posts: 4165
Location: Portugal

CRX wrote:
I’ve been working on this one over the last few weeks.

And it turned out quite good Wink

The oxidation gives it a nice look!! Cool

[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150

Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)

GIVEAWAY: 1

Mike C
Mike C's picture
Offline
Last seen: 1 day 1 hour ago
Joined: 01/22/2014 - 08:03
Posts: 2359
Location: Sweden

Those are nuts! Really nice, both of them.

1stein
1stein's picture
Offline
Last seen: 5 hours 19 min ago
Joined: 12/24/2017 - 16:25
Posts: 609
Location: Poland

You’re definitely an artist. A good one.

lichan
Offline
Last seen: 17 hours 38 min ago
Joined: 07/16/2015 - 00:51
Posts: 396
Location: Oklahoma City

Beautiful work! You are an artist, technical designer, master craftsman, engineer all at once.

rockhound42
rockhound42's picture
Offline
Last seen: 5 days 20 hours ago
Joined: 04/22/2013 - 07:01
Posts: 126
Location: London

Amazing work as ever. Always look forward to seeing the next CRX post.

What about an angle version?

Beer