Emisar D1sV2 respectively Noctigon K1

179 posts / 0 new
Last post
DB Custom
DB Custom's picture
Offline
Last seen: 28 min 7 sec ago
Joined: 01/13/2013 - 22:28
Posts: 20324
Location: Heart of Texas

Looking forward to it. My 10th Emisar and an Epic one at that! Big Smile

Scallywag
Scallywag's picture
Offline
Last seen: 12 hours 36 min ago
Joined: 01/11/2018 - 22:23
Posts: 694
Location: Ohio, United States

djozz wrote:
I on the other hand like the USB port in the threads a lot, it is a solid and waterproof position, superior to putting them in leaking holes under silicon flaps.

I find myself agreeing with you so often on here. Ever since I got my Mini One Ti, I think the USB port in the threads is great. This should be quite the light!
BlueSwordM wrote:
Damn!

Wait, having a linear 5A FET driver means great SST-20 compatibility.

Finally! A stock high CRI super thrower!


I’m skeptical about SST-20 compatability. If Hank is using the white flat, the focus will be a lot different than for any domed LEDs, at least if people’s C8 mods are anything to go by.
A shame Hank almost certainly can’t use CULNM1 in this…

EDC Rotation: ZL SC62 | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 
EagTac D25C Ti | DQG Slim AA Ti | UF-T1 by CRX | Olight S1 | Klarus Mini One Ti
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special
In-progress: Supfire M6 3xXHP50.2 
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100

SKV89
Offline
Last seen: 3 hours 45 min ago
Joined: 12/10/2017 - 12:46
Posts: 3162
Location: US

It’s probably too difficult to procure a good flux bin batch of the CULNM1.

djozz
djozz's picture
Online
Last seen: 1 min 53 sec ago
Joined: 09/07/2012 - 17:04
Posts: 15949
Location: Amsterdam

SKV89 wrote:
It’s probably too difficult to procure a good flux bin batch of the CULNM1.

Or find them at all if they are already being phased out.
alex64
alex64's picture
Offline
Last seen: 47 min 50 sec ago
Joined: 03/16/2017 - 01:42
Posts: 118
Location: Balearic Islands

mattlward wrote:
Does this strike anyone else as odd?

“It does not support the firmware updating, however, there are reflashing pads on the back of
the driver, which is the same as the D4V2.”

So, it will have the contact points but cannot be flashed? Change in cpu? Maybe not an ATMega chip?


I think it means that it has Ramping OS without updates and that with the pads you can install Anduril for example.
charwinger21
Offline
Last seen: 2 weeks 1 day ago
Joined: 02/25/2019 - 20:21
Posts: 42
djozz wrote:
I on the other hand like the USB port in the threads a lot, it is a solid and waterproof position, superior to putting them in leaking holes under silicon flaps.

I mean, they don’t have to by set up with a flap.

A flap is easier to design, but they could just be sealed instead (like what phones do). It just means you can’t plug it in until it dries.

Scallywag
Scallywag's picture
Offline
Last seen: 12 hours 36 min ago
Joined: 01/11/2018 - 22:23
Posts: 694
Location: Ohio, United States

djozz wrote:
SKV89 wrote:
It’s probably too difficult to procure a good flux bin batch of the CULNM1.

Or find them at all if they are already being phased out.

Exactly.

EDC Rotation: ZL SC62 | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 
EagTac D25C Ti | DQG Slim AA Ti | UF-T1 by CRX | Olight S1 | Klarus Mini One Ti
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special
In-progress: Supfire M6 3xXHP50.2 
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100

bquinlan
Offline
Last seen: 12 hours 9 min ago
Joined: 04/19/2018 - 01:07
Posts: 79
Location: Madison, Wisconsin, USA
ToyKeeper wrote:
It can definitely be tricky to make a single program work consistently on a variety of different hardware. It involves all sorts of different abstraction layers and modular designs to allow the front end to remain pretty much the same regardless of what back end it’s running on.

Which is why FSM is such an amazing beast.

Th558
Th558's picture
Online
Last seen: 45 sec ago
Joined: 01/30/2016 - 16:19
Posts: 451
Location: United Kingdom

Hank said the head is 70mm which means it should be over 600kcd Smile

Edit: It’s 550+

Edit: It’s 600+ now so I guess I was right Cool

Igor
Igor's picture
Offline
Last seen: 1 day 21 hours ago
Joined: 08/24/2018 - 17:14
Posts: 80
Location: Germany

Any news on when it will be released?

The darkness is afraid of us.
Flashlights are cheaper than therapy.

MNLegoBoy
Offline
Last seen: 19 hours 26 min ago
Joined: 05/02/2019 - 20:21
Posts: 73
Location: MN

Igor wrote:
Any news on when it will be released?

Soon™

Wowtac A1S BSS, Sofirn C8T, Wurkkos WK30, D4s - BLF LT1 soon
"You can't be scared of the dark, if there's no dark to be scared of"
-Me

ZEUSFL
ZEUSFL's picture
Online
Last seen: 10 min 18 sec ago
Joined: 02/20/2019 - 08:50
Posts: 75
Location: Tallahassee FL

Interested. 

Imalent MS18
Acebeam X80-GT
Fireflies E07 x2
Emisar D4S V2 26650

micknatt
Offline
Last seen: 13 hours 42 min ago
Joined: 10/01/2019 - 23:35
Posts: 13
Location: Georgia, USA

Interested.

bmg50
Offline
Last seen: 2 weeks 3 days ago
Joined: 09/27/2018 - 17:26
Posts: 4
Location: United States

Interested!

redsuns
Offline
Last seen: 5 days 10 hours ago
Joined: 06/14/2013 - 14:55
Posts: 30
Location: VA

Sign me up for 1 Silly
(interested)

JordanZHP
Offline
Last seen: 1 hour 49 min ago
Joined: 03/25/2017 - 04:37
Posts: 321
Location: Petaluma, CA

Hank if you see this thread we would love an update on this project Smile

Hank Wang
Offline
Last seen: 12 hours 26 min ago
Joined: 10/19/2011 - 10:28
Posts: 362
Location: China

JordanZHP wrote:
Hank if you see this thread we would love an update on this project Smile

Yes, we are still working on it, here is the prototype photo, it’s not called D1SV2, it’s called Noctigon K1,
with fully regulated driver, it should reach 600+kcd with CSLNM1.TG LED, there will be green/red
beam version, as well as XP-L HI/HD LED with different color temperature.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Pavlo
Online
Last seen: 6 min 11 sec ago
Joined: 12/13/2015 - 10:37
Posts: 501
Location: Canada

Beautiful!

Ucm45
Ucm45's picture
Offline
Last seen: 22 min 51 sec ago
Joined: 10/06/2019 - 09:08
Posts: 40
Location: Michigan

This looks like it will be a killer light!

contactcr
Offline
Last seen: 16 min 35 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2844
Location: US

What battery does it take?

Hank Wang
Offline
Last seen: 12 hours 26 min ago
Joined: 10/19/2011 - 10:28
Posts: 362
Location: China

contactcr wrote:
What battery does it take?

21700 with the 2A type-C charging port on the threads.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

contactcr
Offline
Last seen: 16 min 35 sec ago
Joined: 05/19/2017 - 18:52
Posts: 2844
Location: US
Hank Wang wrote:
contactcr wrote:
What battery does it take?
21700 with the 2A type-C charging port on the threads.

Both are excellent choices, thanks.

Now I just hope you test an aspheric lens/bezel for it like I emailed about. Smile Maybe asking too much

will34
will34's picture
Offline
Last seen: 2 days 21 hours ago
Joined: 12/18/2012 - 00:12
Posts: 3621

Looking great! And it you cover the reflector part it looks like a regular D4 Big Smile

JordanZHP
Offline
Last seen: 1 hour 49 min ago
Joined: 03/25/2017 - 04:37
Posts: 321
Location: Petaluma, CA
Hank Wang wrote:
JordanZHP wrote:
Hank if you see this thread we would love an update on this project Smile
Yes, we are still working on it, here is the prototype photo, it’s not called D1SV2, it’s called Noctigon K1, with fully regulated driver, it should reach 600+kcd with CSLNM1.TG LED, there will be green/red beam version, as well as XP-L HI/HD LED with different color temperature.

Hank that looks amazing!

Are there different tint options for the CSLNM1.TG LED or only CW?

Thank you for the update.

id30209
id30209's picture
Online
Last seen: 1 min 51 sec ago
Joined: 05/17/2018 - 12:20
Posts: 517
Location: Croatia

WOW!!

WTB Titanium 4sevens Quarks & Jetbeam TCR1

Bob_McBob
Offline
Last seen: 8 hours 36 min ago
Joined: 08/14/2016 - 04:53
Posts: 532
Location: Canada
JordanZHP wrote:
Are there different tint options for the CSLNM1.TG LED or only CW?

CSLNM1.TG is only available in cool white, around 6100K typical.

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 27 min 26 sec ago
Joined: 02/26/2018 - 02:26
Posts: 714
Location: South Africa
Love

Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW3A, BLF FW3C, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

JordanZHP
Offline
Last seen: 1 hour 49 min ago
Joined: 03/25/2017 - 04:37
Posts: 321
Location: Petaluma, CA
Bob_McBob wrote:
JordanZHP wrote:
Are there different tint options for the CSLNM1.TG LED or only CW?

CSLNM1.TG is only available in cool white, around 6100K typical.

I thought I heard some warmer options were popping up, maybe that was the CSLPM1.TG 2mm?

hIKARInoob
hIKARInoob's picture
Online
Last seen: 4 min 42 sec ago
Joined: 08/28/2016 - 08:15
Posts: 4029
Hank Wang wrote:
JordanZHP wrote:
Hank if you see this thread we would love an update on this project Smile
Yes, we are still working on it, here is the prototype photo, it’s not called D1SV2, it’s called Noctigon K1, with fully regulated driver, it should reach 600+kcd with CSLNM1.TG LED, there will be green/red beam version, as well as XP-L HI/HD LED with different color temperature.

Awesome. Big Smile

-X3-
-X3-'s picture
Offline
Last seen: 5 hours 43 sec ago
Joined: 07/16/2014 - 03:28
Posts: 2721
Location: France, Angers

Integrated USB-C charging is awesome, it will directly compete with FT03 Crazy

"-X3-, is there any place in your house without a flashlight ?" 

My Flashlight public album (mods, emitter swaps, eye candy)

My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)

My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)

M4DM4X blog, saves you $$$ 

Pages