WTS modded lights (D4S, M2 quad, etc)

17 posts / 0 new
Last post
contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US
WTS modded lights (D4S, M2 quad, etc)

Posting a few lights for sale here instead of making a new thread for each.. will deduct $7 shipping if you buy more than one.


Green D4S with XP-L HI XP-L HI V2 5D, 4000K
Flashed to Anduril
Modded with Lexel aux board pictured
Includes both tail caps with and without magnet

$65 shipped USPS priority





M2 quad with Luxeon V
Ano has been stripped and sanded. I did not polish it and it intentionally looks ‘well used’ with a bit of ano in fins and nooks with sanding marks etc. Threads still anodized so it locks out manually.

Will take new close up photos tomorrow.

SS bezel, big copper spacer from kiriba-ru, LED4Power mosX linear FET. This is a hefty light. Can be set to full FET or 12A turbo and it will maintain that for a long time.

LED is Luxeon V (4000K CCT), the highest lumen quad you will fit under Carclo optics.

Lighted ice blue tail cap with all springs bypassed.

$85 shipped USPS priority

Edited by: contactcr on 09/05/2019 - 09:31
contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US

Bump since I added FW3A and combined a few lights into one thread.

timbo114
timbo114's picture
Offline
Last seen: 1 hour 49 min ago
Joined: 08/21/2014 - 14:24
Posts: 347
Location: On a lake in SW PA

I’ll buy the FW3A, and choose the PB2.

contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US
timbo114 wrote:
I’ll buy the FW3A, and choose the PB2.

PM sent, sold.

1stein
1stein's picture
Offline
Last seen: 8 hours 45 min ago
Joined: 12/24/2017 - 16:25
Posts: 450
Location: Poland

Beautiful lights, soooo tempting.
Would you accept 8x Convoy S2 as your renumeration?

(just kidding Big Smile )

contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US

D4S price dropped

DB Custom
DB Custom's picture
Offline
Last seen: 2 hours 43 min ago
Joined: 01/13/2013 - 22:28
Posts: 20226
Location: Heart of Texas

You don’t mention how many lumens the M2 manages, there’s that tease that it has “the highest lumens quad you will fit under Carclo optics”… care to elaborate?

I mean, I have my own quad M2 with it’s own healthy chunk of copper and all that, but you know me, I can be drawn in… usually by numbers. Wink

contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US

DB Custom wrote:
You don’t mention how many lumens the M2 manages, there’s that tease that it has “the highest lumens quad you will fit under Carclo optics”… care to elaborate?

I mean, I have my own quad M2 with it’s own healthy chunk of copper and all that, but you know me, I can be drawn in… usually by numbers. Wink

Just for you I remeasured it. 4,290lm after 2-3s in FET mode using VTC5D. ~3,315lm in 12A CC mode

Scallywag
Scallywag's picture
Offline
Last seen: 1 hour 18 min ago
Joined: 01/11/2018 - 22:23
Posts: 626
Location: Ohio, United States

contactcr wrote:
DB Custom wrote:
You don’t mention how many lumens the M2 manages, there’s that tease that it has “the highest lumens quad you will fit under Carclo optics”… care to elaborate?

I mean, I have my own quad M2 with it’s own healthy chunk of copper and all that, but you know me, I can be drawn in… usually by numbers. Wink

Just for you I remeasured it. 4,290lm after 2-3s in FET mode using VTC5D. ~3,315lm in 12A CC mode

Interesting, I seem to recall someone measuring a D4 with Luxeon V over 5000 lumens at turn-on

Edit: Found it

EDC Rotation: ZL SC62 | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 
EagTac D25C Ti | DQG Slim AA Ti | UF-T1 by CRX | Olight S1 | Klarus Mini One Ti
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special
In-progress: Supfire M6 3xXHP50.2 
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100

contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US

Idk could be possible but now that most of us have recalibrated “lumens” down to a lower amount it’s hard to say. I think Djozz usually says his numbers are 10-12% high

contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US

In any case on paper FET + Luxeon V should be one of the highest if not the highest thing you can fit under a Carclo quad. Higher bins probably exist now with the 5000K out.

DB Custom
DB Custom's picture
Offline
Last seen: 2 hours 43 min ago
Joined: 01/13/2013 - 22:28
Posts: 20226
Location: Heart of Texas

Pretty awesome stuff, the M2 makes a great quad…. gotta look to my juggler and see if he’s already overloaded,, Been trying to swing some Glock mods and what with that bodacious golden E07 and the CFT-90, well, lot in the air already…

Scallywag
Scallywag's picture
Offline
Last seen: 1 hour 18 min ago
Joined: 01/11/2018 - 22:23
Posts: 626
Location: Ohio, United States

contactcr wrote:
In any case on paper FET + Luxeon V should be one of the highest if not the highest thing you can fit under a Carclo quad. Higher bins probably exist now with the 5000K out.

I believe Led4Power said his first batch had a higher forward-voltage than subsequent batches, so that could easily contribute. I also don’t know if I’ve seen comprehensive analysis of the voltage drop of Led4Power’s driver in “direct drive” mode.
That said… I am definitely a fan of the Luxeon V quad Wink

EDC Rotation: ZL SC62 | Jaxman E2L XP-G2 5A | Purple S2+ XPL-HI U6-3A | D4 w/ Luxeon V | RRT-01 
EagTac D25C Ti | DQG Slim AA Ti | UF-T1 by CRX | Olight S1 | Klarus Mini One Ti
L6 XHP70.2 P2 4000K FET+7135 | Jaxman M8 | MF02 | Jaxman Z1 CULNM1.TG | Blue S2+ w/ ML Special
In-progress: Supfire M6 3xXHP50.2 
Others: Nitecore EC23 | Nebo Twyst | Streamlight ProTac 1AA | TerraLux LightStar 100

OLd_gUY
OLd_gUY's picture
Offline
Last seen: 2 hours 21 min ago
Joined: 07/20/2019 - 17:52
Posts: 17
Location: Coarsegold, CA USA

@contactcr please check your PMs.

NeutralFan
NeutralFan's picture
Offline
Last seen: 1 hour 40 min ago
Joined: 03/20/2014 - 19:22
Posts: 724
Location: Wisconsin, USA

Hi contactcr, where did you get your ice blue SMD LEDs for your tailcap? I found some 1206 SMD car LEDs on eBay (1x Ice Blue Car T5 Instrument Bulb light Lamp 3 1206 SMD LED 37 70 73 Z2946 ) that I could repurpose, but wanted to check to see if you have a better source.

I’d rather use my flashlight around the house than turn on the lights.

contactcr
Offline
Last seen: 1 hour 10 min ago
Joined: 05/19/2017 - 18:52
Posts: 2562
Location: US

The whole tail board is from led4power. Never bought these before just salvage them from other boards if I need a few.

NeutralFan
NeutralFan's picture
Offline
Last seen: 1 hour 40 min ago
Joined: 03/20/2014 - 19:22
Posts: 724
Location: Wisconsin, USA

Thanks for letting me know. Darn you for making me want to build another flashlight with an ice blue tailcap! Facepalm

I’d rather use my flashlight around the house than turn on the lights.