Interested? - BLF LT1 wrapped battery sets

10/2 update

If you want fresh Sanyo GAs already wrapped, check out The For Sale Post HERE .

As promised, here is a DIY wrap image. PDF on Google Drive

Print the PDF, trim it to width and length as needed for the batteries you want to wrap, put it under clear shrink tube. Or, print on adhesive labels, or…. whatever works for you. :beer:

9/18 update
I’ve done some testing, and found that putting a wrap over the Sanyo GA’s OEM wrap results in a battery that works in an SP36 and should fit normally in an LT1. It however, does not fit in an FW3a. Peeling the OEM wrapper and using standard weight paper results in a cell that fits in an FW3a. Using a nicer, heavier paper results in a cell that is a friction fit in the FW3a. IMHO, that’s too tight.

Unless someone requests otherwise, I’m going to default to peeling the OEM wrapper so the cells will fit as many different lights as possible.

Three final logo options posted for opinions and want-lists
————

9/15 update
I’ve got some test batteries in and am working out the production details and final pricing.
————

Original Post
This is a Pre-WTS post to see what interest there is for logo’d battery sets to feed the upcoming BLF LT1 lanterns. Please leave comments and suggestions, and if you’re interested, how many sets.

Right off the top:

- I am not trying to claim any rights to the BLF LT1 logo or lantern design work.

- Any money I collect is for parts, labor and shipping.

  • I have approval to include the logo

My goal is to be able to offer a set of 4 good cells wrapped in the BLF LT1 logo. This is an example of my initial revision.

My plan:

- Battery

- - I like to leave the original OEM wrapper on the cell to maintain a link to its authenticity, but it this can impact aesthetics. Would you rather have the original labeling underneath or the wrap right on the bare cell? These re-wraps are snug but not tight in my SP36 battery tubes, so I expect they will fit a Q8 or LT1 too.

- - I like the Sanyo NCR18650GA because they have nice capacity, decent current ratings, and a flat top just tall enough to engage an SP36/Q8/LT1 type ring contact.

    • I’m open to other battery types, but I’m going to have to buy one kind in bulk up front to make this work.

- Wrap

- - a color print of the wrap under a clear shrink tube.

- - Because these will be one-off custom assemblies, personalizing a set may be offered.

    • The wrap currently has 4 variants, identified as A, B, C and D. My initial though was to identify the batteries in a set, but there’s no reason they can’t be set A, set B, etc.

- Shipping

- - US only.

    • I expect to use USPS and/or UPS depending on cost.

And the big one - Cost.

- - I’m targeting $30 for the set of 4.

    • I’m hopeful that this will be a shipped price, but I need to do more planning before I can make any promises.

SECOND IDEA
I am seeing if I can work a deal for a logo printed directly on shrink tubing. Single color (black) looks like it will be easily doable. Two colors (black + yellow rays & lantern fill) might also work out. I have a healthy fear of how good/bad the colors will be aligned if they do a second color though. This option would be simple, but nowhere as fancy as the custom made ones I’m talking about above

Not being Lithium based fire in a can, I’d be able to send these pretty much anywhere mail is delivered. While you’re telling me if you’re interested or not, I’ll check into the supplies costs for shipping them.

Subscribed :+1:

Interested

Interested depending on final product

Not in the US :weary:

Interested. I wouldnt mind the wrap over the original one.

Interested

Interested for two sets.

I would be in for a set or three……

Wrapped Sanyos sounds perfect. I’m in for a couple of sets at least.

Now that I think about it more, I’m getting 6 lanterns. These would be the pièce de résistance for the gifts. Matching batteries? Heck yes. My friends already make fun of my lights - until they need them. Custom batteries are perfectly over the top awesome.

Diameter of the bare cell rewraps vs custom wrap over OEM wrap?

slmjim

interested

Once I figure out where I misplaced my calipers I can give you solid numbers. Right now all I can offer is that they fit nicely in an SP36 with both the OEM and custom wraps.

Samsung 30Qs became popular a while back, around the same time the BLF Q8 was being built. A lot of BLF members got 30Q for their BLF Q8s. Compared to the GA, the 30Q have a slightly lower capacity, but higher output current. Since higher current is NOT needed for the LT1, the advantage goes to the GA. The other advantage of the GA is that the flat top, as you said, is high enough to hit the ring. They are also just a bit lower price, at least on Liion Wholesale. So, I would agree with the Panasonic/Sanyo GA being the best cell for this lantern. Thanks for doing this cool wrapping for BLF members. It should be pretty popular. :partying_face:

dang…in Canada.

Can you tell me anything about the rules on shipping these batteries to Canada? I’d hate for your batteries to be lost to Customs.

I am in Canada too. :partying_face:

Interested

I don’t agree with the term “BLF SKUNKWORKS” I think “BLF COLLABORATION” is more appropriate.
Skunks works invokes ( in my mind ) a secretive design and production. Whereas the BLF LT1 design has been out in the open, with design input from many BLF members.

I’m in. I’ve bought some batteries but I’m in for 6 LT1s so I’ll need some more.