Jetbeam RRT01 head and optic GB Interest List

33 posts / 0 new
Last post

Pages

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia
Jetbeam RRT01 head and optic GB Interest List

Hi all,

Sorry for the delay. I finally able to work normally after a stupid injury which broke my pinky toe almost two weeks ago.
This is the interest list for custom Jetbeam RRT01 head and custom TIR optic. I decided not to continue making fully modified RRT01 because I hate the driver. But I see many people really like this torch. A good head part is very critical for those like to mod RRT01 to the extreme. The preliminary discussion about this can be found here:
http://budgetlightforum.com/node/67579

Each package will consist of:
- 1pc head part (pill) made from either 2024/6061/70xx scraps aluminum. Whichever we can salvage from the airbase. This is a BLANK head part without any holes. So you can drill it later to suits different MCPCB.
- 16pcs (8 different beam angle, 2pcs for each type) TIR optics. This optic is much better and simpler to use (no legs) than Yajiamei. I sent some sample to Bob_mcBob to test, you can ask his opinion.

Ships worldwide except to some African and conflicting countries. (PM me about this)

Approximately USD 17-18 for less than 100pcs head part. And USD 0,8-1 0,5 for each optic The final price depends on the quantity.

Note: Payment starts later when we have enough people to start the production. This is perhaps, a one time order, so plan ahead. There’s a minimum order quantity

THE LIST
1. Contactcr
2. Shirnask
3. Shirnask
4. Shirnask
5. Shirnask
6. Veedo
7. Veedo
8. id30209
9. id30209
10. id30209
11. Chatika vas Paus
12. Buzzy243
13. SKV89
14. SKV89
15. E1000
16. E1000
17. Moderator007
18. Gokalpm
19. Gunga
20. Tixxx
21. Tixxx

————————
[Clemence]

Edited by: clemence on 09/26/2019 - 13:55
shirnask
shirnask's picture
Online
Last seen: 3 min 20 sec ago
Joined: 03/21/2016 - 23:58
Posts: 1157
Location: Louisiana

In for 3

veedo
Offline
Last seen: 3 months 1 week ago
Joined: 08/03/2012 - 07:35
Posts: 20

2

id30209
id30209's picture
Offline
Last seen: 4 hours 10 min ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Ooooooooo

In for 3!

maybe 4...

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

Buzzy243
Buzzy243's picture
Offline
Last seen: 1 month 2 days ago
Joined: 04/13/2017 - 08:43
Posts: 45
Location: USA

Sorry to hear about your injury, Clemence. I hope you’re recovering well.

I’m interested in 1 of the aluminum heads.

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Please post your request first. I will tidy up the listing later in Gsheet.
I prefer to offer a complete package of 1 head + 16pcs optic to make purchasing to vendor easier. Approximately $25/set

[Clemence]

SKV89
Online
Last seen: 35 sec ago
Joined: 12/10/2017 - 12:46
Posts: 3570
Location: US

I only need one but put me down for 2 to get it going!

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

I sent Vinh a PM just in case he needs this kind of head. I heard he mod lots of RRT01. Knowing how “crazy” he usually drive his lights, this aluminum head should be a substantial boost.

[Clemence]

shirnask
shirnask's picture
Online
Last seen: 3 min 20 sec ago
Joined: 03/21/2016 - 23:58
Posts: 1157
Location: Louisiana

Add one more for me – total of 4

Gunga
Gunga's picture
Offline
Last seen: 19 hours 53 min ago
Joined: 11/28/2014 - 16:56
Posts: 1842
Location: Vancouver, Canada

I’m interested but don’t think I’d do a good job drilling the holes

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Gunga wrote:
I’m interested but don’t think I’d do a good job drilling the holes

Just send me a drawing and i can drill it for you

[Clemence]

e1000
Offline
Last seen: 16 hours 34 min ago
Joined: 04/07/2018 - 19:57
Posts: 199
Location: LA, CA

In for 2

moderator007
moderator007's picture
Offline
Last seen: 9 hours 40 min ago
Joined: 12/23/2012 - 04:47
Posts: 3266
Location: North Carolina

I’m in for 1 Clemence.
Thanks for offering these. Thumbs Up

gokalpm
Offline
Last seen: 1 week 2 days ago
Joined: 05/10/2017 - 19:51
Posts: 12

Hi Clemence, in for one set (Al head plus optics) here. Thanks

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

My plan was to close this interest list and start collecting payment this weekend. If you guys think there are people need this but not yet knowing, please inform them. Thanks

[Clemence]

id30209
id30209's picture
Offline
Last seen: 4 hours 10 min ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Clemence, take 1 from me. 

One of my RRT’s found new desperate owner.

Total 3 sets

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

Chatika vas Paus
Offline
Last seen: 1 hour 53 min ago
Joined: 09/03/2017 - 13:46
Posts: 663

I’m in for one

Gunga
Gunga's picture
Offline
Last seen: 19 hours 53 min ago
Joined: 11/28/2014 - 16:56
Posts: 1842
Location: Vancouver, Canada

clemence wrote:
Gunga wrote:
I’m interested but don’t think I’d do a good job drilling the holes

Just send me a drawing and i can drill it for you

[Clemence]

I’m just planning to use the stock star or a 16mm noctigon. I don’t have any drawing to send.

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Gunga wrote:
clemence wrote:
Gunga wrote:
I’m interested but don’t think I’d do a good job drilling the holes

Just send me a drawing and i can drill it for you

[Clemence]

I’m just planning to use the stock star or a 16mm noctigon. I don’t have any drawing to send.

Use stock, 16mm MCPCB won’t fit

Tixx
Offline
Last seen: 5 days 23 hours ago
Joined: 08/27/2015 - 22:34
Posts: 304
Location: United States

clemence wrote:
I sent Vinh a PM just in case he needs this kind of head. I heard he mod lots of RRT01. Knowing how “crazy” he usually drive his lights, this aluminum head should be a substantial boost.

[Clemence]

Cool! Because I would need him for the mod and I like this as a mod! Thanks!

Gunga
Gunga's picture
Offline
Last seen: 19 hours 53 min ago
Joined: 11/28/2014 - 16:56
Posts: 1842
Location: Vancouver, Canada

clemence wrote:
Gunga wrote:
clemence wrote:
Gunga wrote:
I’m interested but don’t think I’d do a good job drilling the holes

Just send me a drawing and i can drill it for you

[Clemence]

I’m just planning to use the stock star or a 16mm noctigon. I don’t have any drawing to send.

Use stock, 16mm MCPCB won’t fit

Are you able to drill for stock mcpcb? If so I’ll take a set.

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Gunga wrote:
clemence wrote:
Gunga wrote:
clemence wrote:
Gunga wrote:
I’m interested but don’t think I’d do a good job drilling the holes

Just send me a drawing and i can drill it for you

[Clemence]

I’m just planning to use the stock star or a 16mm noctigon. I don’t have any drawing to send.

Use stock, 16mm MCPCB won’t fit

Are you able to drill for stock mcpcb? If so I’ll take a set.

Sure no problem.

[Clemence]

Tixx
Offline
Last seen: 5 days 23 hours ago
Joined: 08/27/2015 - 22:34
Posts: 304
Location: United States

I would like 2 please. Thank you!

contactcr
Offline
Last seen: 18 hours 9 min ago
Joined: 05/19/2017 - 18:52
Posts: 2921
Location: US

One more bump before it closes!

Gunga
Gunga's picture
Offline
Last seen: 19 hours 53 min ago
Joined: 11/28/2014 - 16:56
Posts: 1842
Location: Vancouver, Canada

You don’t have anything drawn up to run a triple right?

id30209
id30209's picture
Offline
Last seen: 4 hours 10 min ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Bump... are we close to closing the deal?

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

moderator007
moderator007's picture
Offline
Last seen: 9 hours 40 min ago
Joined: 12/23/2012 - 04:47
Posts: 3266
Location: North Carolina

Clemence hasn’t been on for almost 2 weeks. He must be working on something good Wink .

clemence
clemence's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 07/12/2015 - 02:58
Posts: 2414
Location: Bali - Indonesia

Hello everyone,

Sorry for being absent for a month. I had many things to do which required travelling back and forth between Bali and Java. OK, let’s close this interest list and start the machining!

[Clemence]

shirnask
shirnask's picture
Online
Last seen: 3 min 20 sec ago
Joined: 03/21/2016 - 23:58
Posts: 1157
Location: Louisiana
Thumbs Up
id30209
id30209's picture
Offline
Last seen: 4 hours 10 min ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Yes sir!

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

Watermanchris
Offline
Last seen: 1 hour 11 min ago
Joined: 08/06/2019 - 09:12
Posts: 314
Location: Deerfield Beach, FL

I an interested in a set of these with the pill drilled for the stock mcpb please.

Pages