Photos of your new arrived lights

Newly arrived today,11k OTF

So tiny

Candle mode

Quad triple and triple quad

P6vn, quad mule in nichia 219C flavour and drivervnx3


666

And a little CRKT UK legal knife(yeh yeh i know)

Notice the little torx bit which you can remove from the rear and fit in and through the blade/body to make fixed

From here

New C8 from Simon!

Olight I3e Eos copper with UltraTac ss K18 clip, the clip fits better in the i3Eos than the K18 ss…

last arrived Olight S2R (provided by manufacturer), review in progress

S2R with my litlle Sanrenmu

They look bigger until placed next to a knife

my preferred:

WOW!!! I’ve been laying low for the past few years, I poke my head back into this thread. holy moly!!!

The Jet-II. I still love the Jet-I though. :slight_smile:

:+1:

less than one hour arrived….my II-MK

Neat, Trevi_lux, you must do a thread comparing the E15 and the two Jetbeams.

I do not make complete review of this Jet-II MK, but I have added some impressions and Pics and beams in spanish here: http://luxlinternas.blogspot.com.es/

Thanks! That beamshot gif was really useful and Google Translate did a fair job. :slight_smile:

Thaks for comment !
(I will add a short runtime graph today for see the step down and temperature over surface on this)

Temperature over surface:
0 minutes: 25.2 ºC
1 minute: 38.7 ºC
2 minutes: 40.2 ºC
3 minutes: 40.6 ºC
4 minutes: 41.0 ºC
5 minutes: 41.6 ºC
6 minutes: 49.0 C (Turbo cicled again)
7 minutes: 49.5 ºC
8 minutes: 48.9 ºC

All my keychain Lipo rechargueable by microUSB port:
(I have bought today one Nitecore TIP CRI)

is a good indoor light, and only 59mm

I picked up a BD06 a Nitenuman and a cheap COB work light