[SALE] High CRI 90+ Nichias (ENDED)

[giorgoskok]

@Texas_Ace

@giorgoskok

Can i reserve NVSL219C 4000K, Ra9050, D240 flux, sm305 ?

I want 4 - 12 pieces based on price

Yes, I think it is night where clemence is but he will be posting the full GB details later today. I will say that it is a heck of a price on the nicest 219c’s we have had access to yet! I plan on converting basically all my “normal” lights to them around the house. Leaving only the lumen and throw monsters with other options.

Can’t wait to get one in my EDC S2+.

Thanks TA .
So , clemence count me in for 10-12 pcs for sure

[kidanxz]

Yeah…and i’m planning to switch all my lights to 219c’s as well also, but leaving my modded Convoy C8 MT-G2, its still my favourite light to everyday all around use

[zak.wilson (Zak)]

Do these 144As have the Spiegelei problem the one djozz tested did? If not, I want some, and I don’t even have a host for them yet.

I put 5000K R8000 D280s in my Jetbeam T6 and lost an estimated 100 lumens, but gained about 200m FL1 throw over the original XP-Ls. It does get hot faster, but 219Cs can serve well in a role like this.

I got four of the 4000K R9050s in the mail a couple days ago. So far, I put one in a Convoy S3 along with a TIR. It’s nice, but my preference would be 5000K.

[maukka]

I’m pretty sure they do. But I just today found out that the Nitecore TM03 uses a type of two tier reflector that will very effectively hide it.

[zak.wilson (Zak)]

If only TM03s weren’t horrible for other reasons.

I’m imagining one of these in something like a Klarus G30, but perhaps not if it’s unlikely to have an even tint.

[clemence]

“#1” post has been edited/updated

[clemence]

@zak.wilson

Do these 144As have the Spiegelei problem the one djozz tested did? If not, I want some, and I don’t even have a host for them yet.

I put 5000K R8000 D280s in my Jetbeam T6 and lost an estimated 100 lumens, but gained about 200m FL1 throw over the original XP-Ls. It does get hot faster, but 219Cs can serve well in a role like this.

I got four of the 4000K R9050s in the mail a couple days ago. So far, I put one in a Convoy S3 along with a TIR. It’s nice, but my preference would be 5000K.

Will test it for you soon. You can still use colour mixing optics, or OP reflector designed for XHP50/70 if the egg yolk problem still there.

[giorgoskok]

Can someone explain to me the difference between Nichia 219C SM405 and SM403 ?

Edit : found the answer

[mdeni]

Any on 16mm boards with eu shipping?

[clemence]

@giorgoskok

Can someone explain to me the difference between Nichia 219C SM405 and SM403 ?

Did you mean 305 vs 403?
sm305 = 3000K 5 steps McAdams
sm403 = 4000K 3 steps McAdams

I bought thousands of 3000K for my company. 3 steps would make it extremely expensive while the application doesn’t need it. That’s why the 3000K is only available in 5 steps

[giorgoskok]

@clemence

@giorgoskok

Can someone explain to me the difference between Nichia 219C SM405 and SM403 ?

Did you mean 305 vs 403?
sm305 = 3000K 5 steps McAdams
sm403 = 4000K 3 steps McAdams

I bought thousands of 3000K for my company. 3 steps would make it extremely expensive while the application doesn’t need it. That’s why the 3000K is only available in 5 steps

No , i meant SM403 vs SM405 , then found the answer in the OP about steps McAdams .

[emarkd]

Hey Clemence and TA, put me down for 4 219c 3000K emitters. Thanks guys!

[Texas_Ace]

@emarkd

Hey Clemence and TA, put me down for 4 219c 3000K emitters. Thanks guys!

Done.

[maukka]

djozz: 2x NV4L144AM (144A 6V) 4500K, Ra9050 and 4 of each 219C, so 4x 3000 K, 4x 3500 K and 4x 4000 K, thanks.

edit: throw in two of your MCPCBs too for the 144s.

[emarkd]

@Texas_Ace

@emarkd

Hey Clemence and TA, put me down for 4 219c 3000K emitters. Thanks guys!

Done.

Hey are you only getting 5 of each, or is that just all the list space you started with? I don’t actually need 4 of them and I’d hate for others to miss out just cause I got here first.

[Texas_Ace]

@emarkd

@Texas_Ace

@emarkd

Hey Clemence and TA, put me down for 4 219c 3000K emitters. Thanks guys!

Done.

Hey are you only getting 5 of each, or is that just all the list space you started with? I don’t actually need 4 of them and I’d hate for others to miss out just cause I got here first.

LOL, don’t worry. There are PLENTY to go around. Please buy all you want!

I simply started out with 5 and copy/pasted them to each list.

[emarkd]

@Texas_Ace

@emarkd

Hey are you only getting 5 of each, or is that just all the list space you started with? I don’t actually need 4 of them and I’d hate for others to miss out just cause I got here first.

LOL, don’t worry. There are PLENTY to go around. Please buy all you want!

I simply started out with 5 and copy/pasted them to each list.

Good, that’s kinda what I thought but I didn’t want to be the greedy joker that bought all the emitters either. Glad to know I can have my four without guilt

Thanks again.

[chouster]

hey djozz, please put me down for

10x 219C 90cri 4000k

thanks clemence and djozz!

[giorgoskok]

Djozz :

4 × 219C 90cri 4000k

[Ronin42]

So dumb confirming question:

The “– NV4L144AM (144A 6V) 4500K, Ra9050, E900 flux, sm453 (3 steps McAdams, tightest bin available)
NV4L144AM Data sheet (link is external) This 4500K 9050 will be available in mid December 2016 due to raw material shortage – Nichia Rep” Emitters are much like XHP50 emitters in that they are both big and need 6v, sort of an XHP50 without the cross and a high CRI. Am I close?