Texas_Ace
(Texas_Ace)
November 25, 2016, 5:46pm
118
Yes, based on this test by djozz: Nichia 219C, testing a 5000K 83CRI emitter, comparing with a XP-G2 S4 2B and other leds
I would say 800-1000 is well within reason if driven hard since this emitter is high CRI and a bit lower flux bin. Less if driven less naturally.
Gunga
(Gunga)
November 25, 2016, 6:02pm
119
Can you please add 5x 4000K 219C for me?
I’m not in a hurry so I’m okay with an extended end date.
THE_dAY
(THE_dAY)
November 25, 2016, 6:12pm
120
The extension is totally fine by me.
Big thanks to you three for making this even happen!
Do the 319A LEDs also have 453-Tint?
I would have prefered earlier shipping, but I understand the reasons for the delay.
Thanks for doing this.
clemence
(clemence)
November 25, 2016, 6:22pm
123
The_Driver:
Do the 319A LEDs also have 453-Tint?
I would have prefered earlier shipping, but I understand the reasons for the delay.
Thanks for doing this.
Thank you for the understanding, really sorry about it.
Yes the 319A should be available in sm453. But don’t expect the Ra90 or Ra9050 anytime soon. There will be limited samples as usual. I can’t promise you guys I’ll get it though.
Hi
I finally registered so i could get me some of those incandescent-like 219C’s.
I’d like 14 of the 219C 9050 sm305.
Cheers
clemence
(clemence)
November 25, 2016, 7:09pm
125
Welcome to the BLF unique boring guy
PM Djozz for your order
NOTE: Make it 15 and you’ll get the whole last 219C 305. Djozz isn’t online yet. I’ll update the inventory stock in #1 page for you
Thanks
I sent a PM before i saw the note but why not, I have no doubt I’ll find a use for it; I’ve sent another PM. I don’t ‘need’ it the same way as the others though so if someone was hoping to add a single one to their order or something I can easily be persuaded to give it up.
The delay is quite understandable (though I wish it were otherwise) so late December is fine. Thanks for the heads up!
Sirius9
(Sirius9)
November 25, 2016, 11:18pm
128
djozz, any of the “219C 90cri 4000k” left ?
If yes, I would take 4 pcs on your 16mm mcpcb…
djozz
(djozz)
November 25, 2016, 11:36pm
129
Clemence is doing the counting, but there were 300 of those so I’m sure there’s enough left.
Added you to the list!
Sirius9
(Sirius9)
November 25, 2016, 11:43pm
130
just drop me a PM when its time for payment, too many threads here too many interesting things to read and too little time for all of that :weary:
lumenzilla
(lumenzilla)
November 26, 2016, 9:16am
132
Finally there’s Nichia seller that will not cost me much for shipping.
Will order some after moving to new house :+1:
TheOnlyDocc
(TheOnlyDocc)
November 26, 2016, 11:21am
133
Hello,
Would it be possible to swap the XPL LED´s in the Q8 with the 219c without changing anything else (driver?)? Or will they get to much current because of the low Vf? If it is not a problem I am interested in 4* 219C 90cri 4000k. How much would it cost inklusiv shipping to Germany?
Texas_Ace
(Texas_Ace)
November 26, 2016, 11:33am
134
Yes, they will be a direct swap into the Q8. They will use a lot of current but they can handle it. Or you can simply use a lower mode as well.
Wieselflinkpro:
Djozz:
5x 219C 90cri 4000k
Some aditional…
Please a total of
10x 219C 90cri 4000k
3x 144A 9050 sm453 with djozz MCPCB
End of december is ok. Maybe I order some 319A.
RobertB
(RobertB)
November 26, 2016, 4:17pm
136
Djozz, I sent you a PM about buying a few of your MCPCB’s for the 144a
djozz
(djozz)
November 26, 2016, 4:58pm
137
found it, will answer. I’m sorry, I’m not very fast with answering all PM’s but eventually I will answer them all.