It means the order is pending because it is being packed. took 24 hours for me at that stage.
you might want to contact BanL here on the forum if that status doesn’t change. or Abby on Skype (her ID is on the website).
Couldn’t resist to order a XP-L2 V6 3B, although i normally avoid B and C tint bins.
On another note @ BanL:
I received triple MCPCBs but i ordered 20mm single 3535 MCPCBs.
The baggy they came in had the correct SKU number, but the wrong item in it.
But it’s okay, i’m glad to have them, but you might want to check what’s going on with that.
Couldn’t resist to order a XP-L2 V6 3B, although i normally avoid B and C tint bins.
On another note @ BanL:
I received triple MCPCBs but i ordered 20mm single 3535 MCPCBs.
The baggy they came in had the correct SKU number, but the wrong item in it.
But it’s okay, i’m glad to have them, but you might want to check what’s going on with that.
Hi
Sorry for our careless mistake.
You can PM me your order number and i would help to see what is the matter.
If you place the new order, i would help to take back the correct PCBs into it.
got my Triple Nichia 219C today with the little case and Im very happy with the packaging. Will put them up with Convoy S2+ for comparison with other triple led soon
I am registered and I “log in” before I purchase, but their shopping system doesn’t have features like other shops. checkout is via Paypal and that’s it.
There are “favorites” though, you’d save items for later.
Nice. I’ve seen that type of die before (Semileds?) in leds and the output is good! The 365nm version just emits some white-ish/yellow-ish light as well.
Couldn’t resist to order a XP-L2 V6 3B, although i normally avoid B and C tint bins.
On another note @ BanL:
I received triple MCPCBs but i ordered 20mm single 3535 MCPCBs.
The baggy they came in had the correct SKU number, but the wrong item in it.
But it’s okay, i’m glad to have them, but you might want to check what’s going on with that.
Hi
Sorry for our careless mistake.
You can PM me your order number and i would help to see what is the matter.
If you place the new order, i would help to take back the correct PCBs into it.
I can’t be the only one who wishes KD to systematically provide a picture of the reel, please KD tell us what we are REALLY buying and you’ll sell more
—
"-X3-, is there any place in your house without a flashlight ?"
Nice, ordered qty 4 of the V6 3B's, and some more of those black MCPCB's - they sure look good - nice wide traces, etc. The triples are quite thin though at 1 mm. Not sure why the triples are thinner than the single MCPCB's. Triples should actually be thicker - 2 mm would be nice.
Product request:
Cree XP-L2 V5 3A
…or V6 or W2…
+1
V6 or up otherwise might as well get xpl version 1.
I would be happy with any of these tints.
3a, 3c, 3d
First time to order from kaidomain. What does it mean by “Order pending-packing”? Is my item out of stock? It’s been like that for about a week now.
It means the order is pending because it is being packed. took 24 hours for me at that stage.
you might want to contact BanL here on the forum if that status doesn’t change. or Abby on Skype (her ID is on the website).
Hi friend
I will help to follow your order and see what is the matter in that.
Please don’t be worried.
Thanks
Ban
Support @ kaidomain.com KD
kaidomain.com KD - LED Flashlights, DIY Parts and Accessories
Inquiry for KD, please feel free to contact me.
Hi
We get a very limited stock for CREE XP-L2 V6 3B Neutral White 5000K in stock.
http://www.kaidomain.com/p/S026460.Cree-XP-L2-HD-V6-3B-Neutral-White-5000K-LED-Emitter
And also mounted on LED DTP Copper MCPCB
http://www.kaidomain.com/p/S026461.Cree-XP-L2-HD-Neutral-White-5000K-LED-Emitter-with-KDLIGHT-3535-16-16mm-x-1_5mm-DTP-Copper-MCPCB
http://www.kaidomain.com/p/S026462.Cree-XP-L2-HD-Neutral-White-5000K-LED-Emitter-with-KDLIGHT-3535-20-20mm-x-1_5mm-DTP-Copper-MCPCB
Thanks
kaidomain.com KD - LED Flashlights, DIY Parts and Accessories
Inquiry for KD, please feel free to contact me.
Hi
Cree XHP35 HI D2 3D Neutral White 5000K CRI80+ LED Emitter is in stock
http://www.kaidomain.com/p/S026091.Cree-XHP35-HI-D2-3D-Neutral-White-5000K-LED-Emitter
Thanks
kaidomain.com KD - LED Flashlights, DIY Parts and Accessories
Inquiry for KD, please feel free to contact me.
Couldn’t resist to order a XP-L2 V6 3B, although i normally avoid B and C tint bins.
On another note @ BanL:
I received triple MCPCBs but i ordered 20mm single 3535 MCPCBs.
The baggy they came in had the correct SKU number, but the wrong item in it.
But it’s okay, i’m glad to have them, but you might want to check what’s going on with that.
Hi
Sorry for our careless mistake.
You can PM me your order number and i would help to see what is the matter.
If you place the new order, i would help to take back the correct PCBs into it.
Thanks
Ban
kaidomain.com KD - LED Flashlights, DIY Parts and Accessories
Inquiry for KD, please feel free to contact me.
It is now shipped. Thank you BanL.
Well those XP-L2’s didn’t last long, they’re already gone.
ordered two XP-L2 HD for testing it out
got my Triple Nichia 219C today with the little case and Im very happy with the packaging. Will put them up with Convoy S2+ for comparison with other triple led soon
Nico -.-
I have tried to register
24 hours and still no mail to unlock account
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
I never registered at KD, it uses my PP address and luckily ordering went smooth over the years.
link to djozz tests
I am registered and I “log in” before I purchase, but their shopping system doesn’t have features like other shops. checkout is via Paypal and that’s it.
There are “favorites” though, you’d save items for later.
XP-L2 NW out of stock already, that was quick!
USB power meter/tester thread
Yeppp
Neutral White is generally a popular choice for flashaholic
Nico -.-
Hi
KDLIGHT P60-UV 365nm / 395nm is newly arrived.
http://www.kaidomain.com/p/S026464.KDLIGHT-P6-UV-365nm-3V-12V-1-Mode-OP-UV-P60-Drop-in
http://www.kaidomain.com/p/S026463.KDLIGHT-P6-UV-395nm-3V-12V-1-Mode-OP-UV-P60-Drop-in
Thanks
kaidomain.com KD - LED Flashlights, DIY Parts and Accessories
Inquiry for KD, please feel free to contact me.
Nice. I’ve seen that type of die before (Semileds?) in leds and the output is good! The 365nm version just emits some white-ish/yellow-ish light as well.
link to djozz tests
Ban , could you post the label from Nichia of this product ? http://kaidomain.com/p/S026299.Nichia-NVSL219C-R9050-D240-4000k-CRI92-LED-Emitter-1-pc
I mean the label like you have posted in Nichia 219b : http://kaidomain.com/Product/PhotoGallery/56186/236761#id=0
- George
My Reviews : KDlight C8 / ThruNite Archer 1A V3 / Thorfire C8s / ThruNite TN12 (2016) / Utorch UT01 / Utorch UT02 / Jetbeam WL-S2 (xp-l) / ThruNite TC12 V2 / Massdrop Brass AAA / Manker LAD / Lumintop SD26 / ThruNite Mini TN30 (3x xm-l2) / Qualilite D81 / Nitecore MH20GT / Odepro TM30 / Klarus XT30R / Nitecore NU20 CRI / Ultrafire XM-L2 / Foursevens Mini MK II / Manker E02 / Manker E14 II / Teekland Flashlights / Lumintop Elfin / Thorfire S70S / ThruNite Neutron 2C / Jaxman M8 / KDLITKER C8.2 / Zanflare F1 / Nitecore Concept 1 / Emisar D4 / Astrolux MF-01 / ThruNite TC10 V3 / Amutorch JM70 (xpl hi)
Thanks BanL.
I will PM you soon.
Which tint bin is this?
http://kaidomain.com/p/S026146.Triple-Cree-XP-G3-Neutral-White-4500K-LED-Emitter-with-20mm-x-1mm-DTP-Copper-PCB-Parallel-w-optics
Can you post the photo of the reel?
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
I can’t be the only one who wishes KD to systematically provide a picture of the reel, please KD tell us what we are REALLY buying and you’ll sell more
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
restocking those sold out items?
Cree XP-L2 HD Neutral White are back in stock guys
Nico -.-
…and with a picture of the Cree package:
KD is KoolDomain.
So, the new information we have is that these are 70+ CRI LEDs.
May the Light illumine you
Merry Christmas to all BLF friends,
We must try our best to get those hot sales Flashlight Parts and Accessories.
We understand yours concern. I will help to follow this.
Merry Christmas
Ban
kaidomain.com KD - LED Flashlights, DIY Parts and Accessories
Inquiry for KD, please feel free to contact me.
Does anyone has experience with one of these items?
http://www.kaidomain.com/p/S024846.DIY-DRG99-Heatsink-Compounds-with-Inj...
http://www.kaidomain.com/p/S003120.HT916-Silicon-Thermally-Conductive-Se...
Are those the thermal glue kind (does it get hard)? Can they be used to pot a driver?
And how do they perform?
Nice, ordered qty 4 of the V6 3B's, and some more of those black MCPCB's - they sure look good - nice wide traces, etc. The triples are quite thin though at 1 mm. Not sure why the triples are thinner than the single MCPCB's. Triples should actually be thicker - 2 mm would be nice.
Pages