I never registered at KD, it uses my PP address and luckily ordering went smooth over the years.
I am registered and I “log in” before I purchase, but their shopping system doesn’t have features like other shops. checkout is via Paypal and that’s it.
There are “favorites” though, you’d save items for later.
XP-L2 NW out of stock already, that was quick!
Yeppp
Neutral White is generally a popular choice for flashaholic
Hi
KDLIGHT P60-UV 365nm / 395nm is newly arrived.
http://www.kaidomain.com/p/S026464.KDLIGHT-P6-UV-365nm-3V-12V-1-Mode-OP-UV-P60-Drop-in
http://www.kaidomain.com/p/S026463.KDLIGHT-P6-UV-395nm-3V-12V-1-Mode-OP-UV-P60-Drop-in
Thanks
Nice. I’ve seen that type of die before (Semileds?) in leds and the output is good! The 365nm version just emits some white-ish/yellow-ish light as well.
Ban , could you post the label from Nichia of this product ? http://kaidomain.com/p/S026299.Nichia-NVSL219C-R9050-D240-4000k-CRI92-LED-Emitter-1-pc
I mean the label like you have posted in Nichia 219b : http://kaidomain.com/Product/PhotoGallery/56186/236761#id=0
Thanks BanL.
I will PM you soon. :+1:
Which tint bin is this?
http://kaidomain.com/p/S026146.Triple-Cree-XP-G3-Neutral-White-4500K-LED-Emitter-with-20mm-x-1mm-DTP-Copper-PCB-Parallel-w-optics
Can you post the photo of the reel?
I can’t be the only one who wishes KD to systematically provide a picture of the reel, please KD tell us what we are REALLY buying and you’ll sell more
restocking those sold out items?
Cree XP-L2 HD Neutral White are back in stock guys
…and with a picture of the Cree package:
KD is KoolDomain. :sunglasses:
…and with a picture of the Cree package:
So, the new information we have is that these are 70+ CRI LEDs.
Merry Christmas to all BLF friends,
We must try our best to get those hot sales Flashlight Parts and Accessories.
We understand yours concern. I will help to follow this.
Merry Christmas
Ban
Does anyone has experience with one of these items?
http://www.kaidomain.com/p/S024846.DIY-DRG99-Heatsink-Compounds-with-Injection-Tube-0_5g-2-pcs
http://www.kaidomain.com/p/S003120.HT916-Silicon-Thermally-Conductive-Sealant
Are those the thermal glue kind (does it get hard)? Can they be used to pot a driver?
And how do they perform?
Nice, ordered qty 4 of the V6 3B's, and some more of those black MCPCB's - they sure look good - nice wide traces, etc. The triples are quite thin though at 1 mm. Not sure why the triples are thinner than the single MCPCB's. Triples should actually be thicker - 2 mm would be nice.
Nice, ordered qty 4 of the V6 3B’s, and some more of those black MCPCB’s - they sure look good - nice wide traces, etc. The triples are quite thin though at 1 mm. Not sure why the triples are thinner than the single MCPCB’s. Triples should actually be thicker - 2 mm would be nice.
If you solder the mcpcb on the spacer (or copper pill etc) i don’t think there will be a problem .
But i would like too , a better one , with 2mm thickness .
these are 70+ CRI LEDs.
Aw.
the triples are thinner than the single MCPCB’s.
Shucks.
I agree thicker triple MCPCB would be better.
With 2mm thickness the legs of the optics wouldn’t stick out / through the bottom either.