Iām a welderā¦ I got a thing for my metals, and can handle the heat :smiling_imp:
I purchased this tube from aliexpress at $2.50 shipped!
I preordered this as I like the form/function of the S41/S41S.
Not entirely sure about the feasibility of the switch being in the hottest part of the light as I have experienced the power of this lil pocket heater.
Probably very usable at its 6 lower levels so the switch is welcome for those.
Iām also interested in the variety of metal heads.
Weāll see how the Al head handles the heat.
Can I please have another code? If possible
the code can be reused ;)
Got the code and purchased! Thanks M4D M4X!
I ended up with the XPG3 after a lot of back and forth between that and the Nichiaā¦ Was a hard choice for sure, but too good a deal to not get one. Maybe a S41S deal will pop up thats too good to pass up and I will grab that in Nichiaā¦ (hinthint)
thank you all for your support! :beer:
i wanted to orderā¦but not sure about the cheap usb flashlightsā¦.never had anyā¦.what do you think?
I am thinking the same. I will still preorder two to test. Already have blf A6 and going off that, it will be a great little light.
Thanks a lot Martin, XP-G3 ordered!
Thanks. Got mail and placed order =)
I went back and forth between the much higher output xpg3 and the nichia. So at this price I opted to get both. Iām not a fan of the rings and color bands of the xpg3, but outside it really doesnāt matter. I too wasnāt fully convinced from the listing that the 18650 tube wasnāt included, just that the battery wasnāt.
I donāt have any 18350 IMR cells, so what going to be good? Iām sure Mte Windyfire cells would be great, but those arenāt currently in stock. Also, itās usually safest be to get button top since I donāt know if the light as physical polarity protection, but will flat tops work as well?
Hi Martin! May I request for the code? thank you!
Hi Martin, code pleaseā¦ thx
Hi Martin!
Thanks for the code, now I have to wait for my first Nichia torchā¦.
Iād like to request a code please
Codes sent :)
:beer:
ah red tape. Signed
I am only interested in the Nichia.
Do you know if they are high CRI?
XP-G2,XP-G3,Nicha 219C
Light Temperature: XP-G2(6500K),XP-G3 (6000-7000K),219C(5000K)
Light Color: Cool white,Cool white,Warm white
Material: Aluminum alloy
Total Emitters: 4X
Group2:Low,Med2,High1,High2 (with memory function,duble click the button,short press<0.5s)
Lumens: 2lm,20lm,140lm,240lm,545lm,735lm,2023lm (XP-G3)
1lm,17lm,125lm,220lm,490lm,650lm,1740lm (XP-G2)
1lm,16lm,125lm,210lm,475lm,630lm,1630lm (Nichia 219C)
plan on 70 cri but might be 83?
Well I ordered one but thought is was a 18650 flashlight. Not a big issue can order an extension tube. But if its an 18350 write it down.
I might have missed seeing my post- But Iād sure like a code please if you didnāt send me an email. Sorry if this is a duplicate post. Will the output vary much between the 18350/16340/18650 batteries? Iāve got plenty of 18650ās arounfā I apologize if I messed up writing. I have catarsacts and my vision is kinda messed up todayā¦ I did see this spec and thinking on the XP-G3. Thanks for the chance to save some money. onnha
Any pre- tests somewhere of this light!?