Well, I donât want to be part of any arguments about it, but Iâm in agreement that the Q8 lights shouldnât have sold in any way, shape, or form, on any website, under any conditions, until the GB list was satisfied. And by âsatisfiedâ I mean all shipped. Iâm sure Banggood had âgood reasonsâ for it, but I donât personally like it. And furthermore, it makes running down and fixing issues a bigger problem for the Q8 team, unless they just disavow all the non-GB sold lights, which would be fine by me.
Well I kind of think Elfeland being BG is the same.
People with issues have a choice,
EITHER
try customer support or AE messaging that is aimed at stalling by people not knowing about flashlights or the Q8
OR
post here
Amen, amen. Pointing out where to look for potential failures is the kind of help we all appreciate.
A cold solder joint can crack and eventually separate and thatâs easy to fix, if you know where to put the soldering iron briefly.
Seems like theyâre doing a production line where each worker does a single operation (e.g. one guy was putting on the left switch LED from one reel, then passing the board on to the other guy who was putting the right LED on from a different reel, then passing it on to the guy putting the resistor on âŚâŚ)
So if thereâs a problem with one particular solder join being poorly done (too fast so itâs a cold solder spot that will crack later, for example) â thatâs a QA type situation where identifying the possible problem can help everyone look for it.
Hm. Why didnât they have those guys place all the components, then another guy solder them with a heat gun? Oh, well âŚ
So far i had no real worries about the switch leds⌠even planning on disabling them if they are too bright or faulty⌠But a few people mentioned PINK leds and now i want some in my Q8! Whatâs wrong with me? :person_facepalming:
Soldering those rice grains does not look easy thoughâŚ
Right JasonâŚ. and those hot pink ones like in Jasonâs avatar have a violet or light purple kind of cast to them that I find appealing, I typically do just like Jason did there and use one blue and one pink and like the effect. Although on my L6 I have 2 pink and itâs really nice too.
The Miller I am simply concerned that someone who ordered a q8 8 days after myself and approximately 1400 other blf members has received a shipping notice from Ali Express. Is that not a bit odd? I would like to know if find whatâs going on there if you donât mind. It seems to me to be underhanded at best. If all of those lights that arenât up to blf standards are being sold at another vendor and the only issue is a possibility of uneven brightness on indicator leds. Especially if they are making all new lights and the other 2k are to be sold as is. I just find this to be odd and you wanted questions to banggood to go through you. I personally would love to know the answer to that one
Not really, least for me. Put solder on your iron tip, apply to the SMD LED - no problem - really doesn't matter if you damage the LED's you are removing. I've done this many time, not just with LED's.
I get you.
My estimate is that there is no way another 1000 were made just to sell via Banggoods AliExpress store. They have the same source.
AliExpress is strict when it cones to terms so not marked as shipped means cancel and refund. So they say shipped awaiting the real shipping. Vendors can extend purchase protection so they have the time as soon as they marked it shipped.
There is no short cut there, just a few extra $ to pay to get a non working tracking
If this is not satisfying enough I will ask Banggood, but I doubt they want to be all that open about how things are connected.
I only learned about OEMs and connections from Neal when he left Banggood and only when I promised not to post about what brand is actually made by who. They just love to keep things in the dark you knowâŚ
I ordered lights through Banggood on 10Sep and 12Sep that are backordered with expected shipping 10October⌠and I read now that people buying lights through other sites as late as 15Sept already have shipping notices. Also, a buddy of mine reported paying $43 on a competing site the very day I bought mine at the group-buy price of $40.
So now my attention turns towards the future. Iâve already given $14 to the GT project. If the rollout of that light happens similar to the Q8, with secondary vendors shipping lights to the masses at the same price ahead of those forum members whoâve had money staked for months, and without whoâs support the project never would have happened⌠it will not go over well.
And this rant is not to take away anything from the incredible amount of work many forum members have put into this and future projects as Iâm sure certain details of exactly how the product rollout would happen were intentionally withheld by the vendors⌠but it is something to plan for in the future.
So I would say âI canât wait for my lights to arrive!!!â⌠but according to Thorfire, I can.
It feels like Equifax â weâre not the seller, and weâre not the buyer, so the market doesnât work.
Weâre part of the product[ion] being sold. Free design and QC, we are.
I didnât mean to add more fuel to the fire, just meant to share information. The_Miller is absolutely right in the fact that my order may have been marked as shipped just to give it a tracking number, keep the purchase âliveâ, and extend purchase protection through AliExpress until October. I wouldnât be surprised at all if my order has not actually shipped and are using the system to buy some time until they get stock again.
They look Really nice!
The one on the right has that neat Moon shape, could be an add on upgrade and there would likely be a demand.
Whatâs your Mod fee?