ENEDED

I actually did remove the screws to the brass ring and board, just to have a look. The wires to the board seemed secure. I could not tell if the wires were damaged at the center hole, without desoldering them from the board. I have almost no experience with soldering, especially on circuit boards, so I did not attempt anything and put everything back together.

Thank you for the update, Freeme! I’ll be looking for their response.

17track:

2017-09-12 15:22 Item is announced /bppost received the information
then it vanished as “not found”, after few days I got this:
2017-09-12 10:04 Item is announced /bppost received the information
now it vanished again…

PackageRadar:

September 18 14:03
Electronic shipment information received
Belgium Post
September 18 10:04
Electronic shipment information received
Belgium Post

Same here. Looks like plane flew over Bermuda triangle…

How does this work? You make a deal with banggood and we order it?

Just for info that TA Narsil board used in TLF was designed from me lately

that MF01 design is on sale in the 4. batch just I wait for 3 orders, then order 3 boards, as the PCB is not cheap ordered from Oshpark

Are most people on here taking off the plastic border on the positive end of the battery carrier?

And someone mentioned that LG HG2 flat tops work on in the carrier right?

I would like one with NarsilM for an MF01. edit: misread; probably wrong thread. “driver by Lexel”

LG HG2 flat tops worked without removing those plastic rings but those HG2 are not absolute flat tops like my Samsung 25R which did not work. 25R worked after I removed the rings. HG2 has slightly elevated button on their flat tops and they work well in my Meteor too. My button top HG2 and button top Samsung 30Q worked also without removing the rings.

Forgot to mention I want the XPG3

I don’t know but I removed them in my batteries carrier. There is a raised ring on the outside of the plastic disc that catched the wrapper of one of my brand new sony VTC and I hated this. Slightly damaged wrapper but no big deal though.

freeme, I am also interested in another XP-G3 that I want to gift to someone.

Thanks.

I want XP-G 3 plz

Is it purple or “rose”

as long as its not green!

I would like to clarify I am interested in XP-G3
Thanks!

Interested in the XP-G3


Nitecore TM26 holster surprises well.


Nitecore TM11 holster is slightly tight.

It is still copper if it is this brand :wink:

My nichia just arrived. Very nice tint and beam.
It’s pretty bright. I’m yet to test at night.
My first thoughts:
The box is really nice make it feel premium when opening.
The light feels heavy and but very solid built. Dedinerly heavier than a imalent Dt70 or niwalker mm15mb.
The battery carrier feels so well built and sturdy, heavy too.

Really liking it. Might even have to order another later on.
Now I’ll have to test a bit more at night and see if it all is working well. But we’ll with it.
Definitely feels like twice the price we paid.
Hopefully astrolux can keep up this quality from now on. Haven’t had much luck on the S41ss and S42.

Left / right 219C middle XP-G3
I have S42(XP-G3 or 219C).
S41(XP-G3 or 219B) imalent Dt70 was previously owned.
Here it seems that the reputation of S41 S42 is bad, why?

That picture shows the NW version of the dqg. I’ve got the CW version and it has a hint of yellow in it. So I’m trying to compare CW DQG 7X with CW MF-01. If anyone has this combination please let me know how they compare.