Silicoon if you want an SRK/SODA can type light then the Q8 is the one to have at this price.
The few little niggles that have been found on a very few of the first production run (my 2 are fine however) will be ironed out quickly & before you get a light so if I were you I would PM The Miller & get in on the group buy for the Q8
Got two Q8 today. Really nice toys, thanks a lot to the team!
But - Thorfire should definitely improve packaging for the next batch. I got the lights in a thin bag, the cardboard box only wrapped with a foam sheet. The two small sides of the box were free of protection. Box and tailcap of one light have a big dent, the bag probably fell down on a solid edge during transport. The tailcap is also somewhat bent, you notice it when screwing.
And threads need more lube - there was an awful squeaking when screwing battery tube and tailcap on both lights.
Mine have been mixed - some dry, some well lubed threads - clearly an attempt was made on both ends of the battery tube, but if you wipe/clean it off, it's pretty dirty...
Also noticed some minor small nicks/bare alum showing on the square threading. Not sure if even a good HAII will hold up under all that contact. HAIII is way better for square threads.
SRK clones with pointy threads are impossible to keep anodized though - got a few and all shoe bare spots to some extent, many make electrical contact.
I noticed the title of the thread now says “production halted…”. For those of us that are sitting on the fence because of some of the minor issues raised, should we place our order now if these issues don’t concern us too much. I am just mindful the coupon deadline is less than a week away? Thanks.
I already bought a pack of 4 30Q from banggood too, which was already shipped a couple of days ago. Mind you, there is no guarantee I will receive them due to _)*_)#( Australian customs!
TWODOLLARBILL would you mind letting us know if you indeed get a actual tracking movement on the Q8 that you purchased on September 15th from Ali Express? That would be very helpful.
Thanks
Here is the latest update I have in the order details section:
2017.09.19 03:42 (GMT-7): 【GuangDongShengShenZhenShi SHENZHEN 】Despatch from Sorting Center
Here is the latest update I have in the order details section:
2017.09.19 03:42 (GMT-7): 【GuangDongShengShenZhenShi SHENZHEN 】Despatch from Sorting Center
I’ll update if a new posting appears.[/quote
The Miller, the above is making it clear that his shipping info, if fake, is very elaborate don’t you think? I have never heard of a bogus tracking number showing actual movement. :weary:
Considering all the great reports regarding the first batch (and ignoring what i consider very minor issues) i just placed the order for my second Q8 (#1645) - along with a few BT 30Qs of course.
The SRK style soda can light is back… with a vengeance! :smiling_imp:
Amazing work and result by all involved in this project. Thanks a lot!
My first is still back order… while some already have more then two to play with. :cry:
Hopefully the second batch will include a few improvements.
Got mine today. Its awesome! Immediately one of my favorite lights. This is my first “SRK” of any sort, although I do have other soda-can lights, but I really like this style. Its slightly larger than something like the Meteor but I love the reflectors, so its well worth the size trade-off. Honestly at 40 bucks I almost feel like someone gave me this thing. Its a lot of light for the money!
No issues other than those that are already known. Like most everyone else, my switch LEDs are out of balance, brighter on one side:
And like someone else reported, my tailspring board screws were coated with some sort of threadlocker. In fact mine had so much I had to apply heat to one screw to get it out without rounding off the head. I cleaned it off of course but to my eye it didn’t make much difference. A meter might tell a different tale, but if I can’t tell it in use then does it really matter? Not to me.
My brass positive contact was also pretty dirty, but honestly I just think that proves they tested it first
Soldering on the driver looks good. Mine was covered in some dust too, like someone else reported, because the screws used to hold the driver in are too large for the hole, so they have to cut their way through. Doesn’t seem to hurt anything though:
But my threads are awesome, very smooth and well lubed. In fact all my ano seems to be great, no issues there:
And my emitters are very very close to centered, close enough to not matter, with no sign of dirt or fingerprints on the reflector or lens:
Oh, and about those unbalanced switch LEDs? Well someone said blue/pink a few days ago and I thought that sounded like a good idea, so I took it for my own My camera basically refuses to photo this pink properly, its much more saturated in person, but hopefully you get the idea. This is great!
I’ve got nothing at all to complain about here. Performance is great, the UI is fantastic (but I already knew that, not my first Narsil light), build quality seems top-shelf. All-in-all this light is nothing but a home run. Thanks so much to all who worked to make this happen.
Unisex lighting - sounds ol' school nowadays... You guys convinced me though - gotta try it. I got blues, pinks, yellows, whites, oranges, reds, UV/purple, but no combos.