I’d be interested in one in white and NW tint. I have two of these lights already and love them. This would give me an excuse to experiment a little in some modifications of one or two of them.
(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)
Because with a turbo in a mode sequence, it is one more mode to have to cycle through and when you leave the turbo, you are back to the lowest mode if the sequence is from low to turbo.
With a turbo by double clicking, you can turn in ON when you are in any other mode and, depending on the UI, you can return to your previous mode when you leave the turbo mode. You can go to turbo from OFF by double clicking or you can go from OFF to a memorized mode by single clicking. This type of UI is more useful IMO.
If turbo has a step down, how do you reactivate turbo ? By cycling again throught all mode while it is much better by another double clicking.
And for those asking for 70.2 :
Habilite Official wrote:
MT03 is a flood light. We have no plan to upgrade it to XHP70.2. So MT03 will still have XHP70 version. and the beam color of MT03 XHP70 is nicer.
MT03 is a flood light. We have no plan to upgrade it to XHP70.2. So MT03 will still have XHP70 version. and the beam color of MT03 XHP70 is nicer.
Habilite Official?
The 70.2 in neutral white should look fine with an orange peel reflector. It should also run cooler allowing it to stay in a higher level without stepping down as fast, longer run times as well.
It’s also cheaper for anyone that wants to copy Tom E’s fet+ lumen monster since they won’t have to replace the led’s.
(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)
This thread seems to have slowed down really fast and the UT03 group buy thread (which is on hold) is still rolling along. I thought the possibility of XHP70.2’s would draw more interest.
Is there something about the MT03 that people don’t like?
Discussion:
Interested in price on white one with NW tint thanks!
I’d be interested in one in white and NW tint. I have two of these lights already and love them. This would give me an excuse to experiment a little in some modifications of one or two of them.
Any idea on approximate price for a NW one?
Edit: I’ve just cancelled my order on GB, so I’m in for a NW ( preferably silver, but black is fine ).
Interested in a 70.2 NW.
Sorry, price is not fix.
Will request for it if there is even interest.
Yep
Interested in 70.2 CW
any idea how many lumens will it be?, over 12000 lumen i hope
Forgot my pen
Any chance of an MT-G2 variant?
you know for the tint snobs, PLEEESSSS
(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)
interested in cw/nw
Interested in 70.2 NW.
Interested! White 70.2 NW please. Could we get an approximate time when we will be able to place order? PM price if you know, thank you.
Living that BST life.
Was literally getting ready to order when I saw this thread, please let me know timeline so I can get one ordered.
Living that BST life.
Interested only if turbo is in the mode sequence.
May I ask you why ?
Because with a turbo in a mode sequence, it is one more mode to have to cycle through and when you leave the turbo, you are back to the lowest mode if the sequence is from low to turbo.
With a turbo by double clicking, you can turn in ON when you are in any other mode and, depending on the UI, you can return to your previous mode when you leave the turbo mode. You can go to turbo from OFF by double clicking or you can go from OFF to a memorized mode by single clicking. This type of UI is more useful IMO.
If turbo has a step down, how do you reactivate turbo ? By cycling again throught all mode while it is much better by another double clicking.
And for those asking for 70.2 :
Interested in a white with 70.2
Habilite Official?
The 70.2 in neutral white should look fine with an orange peel reflector. It should also run cooler allowing it to stay in a higher level without stepping down as fast, longer run times as well.
It’s also cheaper for anyone that wants to copy Tom E’s fet+ lumen monster since they won’t have to replace the led’s.
Something went wrong with copy-paste.
http://budgetlightforum.com/comment/1191331#comment-1191331
From cree
K4
XHP70A-00-0000-
0D0UK445G
K2
XHP70A-00-0000-
0D0UK245G
J4
XHP70A-00-0000-
0D0UJ445G
all 4500 k
90CRI
xhp70
what they may want to push is
45E
70 CRI
cree also has
80 and 90 CRI in 4000k
(“It’s good that most people can’t remember their previous lives. Otherwise
things would be a lot more complicated than they already are.”
Ajaan Lee Dhammadharo)
Interested in 70.2 CW
Interested in 70.2 NW.
We can easily forgive a child who is afraid of the dark; the real tragedy of life is when men are afraid of the light --- Plato
Interested in White Cool led.
We must prove there is a demand for it.
Interested in 4000K xhp70.2
Interest in 4000k NW or warmer in white depending on price.
interested in a white one with xhp70.2 in cw depending on price?
Interesting choice.I don't think there are many warm XHP70 light out there.
Indicate your choice in you reply if you.
Tint: NW (default)
Emitter: CREE XHP70 (default).
---------------------------------------------------------------------
Interest List:
This thread seems to have slowed down really fast and the UT03 group buy thread (which is on hold) is still rolling along. I thought the possibility of XHP70.2’s would draw more interest.
Is there something about the MT03 that people don’t like?
MF01 is drawing all attention?
Pages