Still interested in 219c version.
Thanks
seems to be inline with my own measurement or close to it which is 9600 Lumens on 30Q. There is no way this is a 7000 Lumens light at least not in mine.
Interested in XPG3
According Tom E here 10.5A should produce 5660Lumens.
so i adjust my calculation.
MT03: 8738 Lumens
MF01: 10862 Lumens.
Interested in a XPG3
I think Toms L6 was CW, is yours also CW? I know the NW xhp70 has quite a bit lower output at the same amps.
would you live next to his house ?? 
Please add me to the list for one of each LED types.
Thanks.
Ha ha, part of me says ‘sure’, the other part says ‘no effin’ way!’ 
On another note, I’m interested in another 219c, please.
Interested in 219C.
oops yes mine is NW. so yeah around 9600 Lumens.
how long is the wait for second round Freeme?
im tempting to spend money on a different light if this is a long wait.
X80? 
Yeah I have my eyes on X80 
but the price is steep
I am using Samsung 30Q ( fresh cell and fully charged ) and I have no way to measure the lumen , but it seems to my eyes that
my MF-01 is not as bright as the result shown above in level 2 3 ( 804lm> 1524 lm ).
I mean when I step up , it not as bright as double figure here. It is more like 804lm — > 1000lm. ( just a tad brighter ).
I also compare with my other light which has solid 1500 lm. It appears that MF-01 has less bright than 1500lm.
It is so,the price is steep.So,I look for the DX80,if the full review will be positive.It is cheaper with a coupon,plus it has way more intensity.
Going from 800 to 1500 lumens is not going to look twice as bright to your eyes, more like 30% brighter. Only way to know is with a measuring device.
Got my MF01 today. It works perfectly. Was happily surprised that it uses high CRI (>90) 219Cs. I thought it used the standard CRI80 219C 5000K.
The tint is absolutely beautiful, no shift to speak of and no other anomalies. The UI is quite the step up from the disaster that was the S42. All in all a superb light for the GB price!
Some PWM (or other flickering) evident on a cellphone camera on all modes except low but not visible to the eye. Didn’t have time to scope that out yet.
Output is not quite what is claimed, but I don’t care. For comparison, it produces 45% more lumens (35% more at 30 sec) than the Noctigon Meteor M43 equipped with CRI80 219Cs. My lumen measurement seem to be about 5-15% less than other people’s, but mine is calibrated with a reference halogen bulb and I use a spectrophotometer instead of a lux meter.
Output with Samsung 25R (lowest IR of any of my cells):
Throw:
0 sec: 44575 cd
30 sec: 40648 cd
Tint in different output modes (click for higher res):
Tint in different parts of the beam on turbo (click for higher res):
CRI data on turbo:
I’m always impressed by your emitter data.
Even though I can’t understand it. Lol
Count me in for the 2nd batch, 219c flavour thanks Freeme :+1: