ENEDED

The Nichia one will give an even consistently white beam with great color rendering (reds will be deep and saturated) while the XP-G3 will be all over the place with a pale and sickly greenish look to it (at least on some parts of the beam). In my opinion the output difference is not big enough to justify the XP-G3.

Here are Beamshots of both flashlights from Bluzie (TLF)
Nichia
XP-G3

They did acknowledge the carrier issue when I asked them. They are currently working on it as well.



  1. You name is in the list, you will see it if you scroll down the table. Note: there a few pages for the table. You could either use the search function located at top right corner or click through various pages with the link located at the bottom of the table.
  2. As for knurling design, i have to ask them if they will update them for second batch. 50/50 chance.
  3. For MF-02 enquires, please refer for my post at https://budgetlightforum.com/t/-/47238.


Will new carriers be available separate (at a reduced price) for us with lights from the first batch?

Will get back to you on this. I have already may a note for it.

Ohhh thank you! I think I like that Nichia better!

After reading all 47 pages I’ll have to agree with you. Nichia does look a lot better despite the lesser output. The photo from Aussi above showed exactly what you were referring to. And the Nichia isn’t that far behind interma of light output (in picture). The camera might be able to pick up the difference but I think to our eyes will be the same… blinding lol.

I’ve also heard that Nichia in turbo mode will produce slightly more heat than the XP-G3, and I know someone posted about it few pages ago… but I can’t find it anymore lol.

Welcome to BLF!
Are you sure you want with this one?
It gets hot fast, has cells in series and the actual longer usable brightness is matched by lights that are cheaper and don’t get so hot.
I do like how that carrier is made though, but the massive output just makes it too hot too fast and it misses a real moon (with a moon one can look at the LEDs, I like that but low on the MF01 is too high for that).

I am using it with 30Q BT cells.

So idk what you are used to but a nice clear C8 NW Biscotti packs a nice punch and seems more practical and safe to begin with
(Read up on li ion safety see link in my SIG)

Hello!
I am actually looking into several lights and I found a very great deal on Haikelite MT03 and I already pulled the trigger on it lol
10LM,150LM,1000LM is a usable and good light spacing for me, and get to kill zombies with 9000s so that one I got (But haven’t arrived yet…)

At first I was looking at Imalent lights but the one I interested in had bad lighting spacing (from too low to too high) so I scratched that off the list.

Another I very considering is the Klarus G20… 3000 lumens max (Or so they claimed) Rechargeable and comes with battery ready to play. Also found a very good price just under $65 new…

Reason I want this MF01 is because of that high lumens output with under $100… I know it won’t be able to run in turbo for very long but I still want it for no real reasons…… but bright lol

Hi yuhsin,

I prefer the Haikelite SC02. The SC02 has a much nicer lightcolour as Klarus G20 and a better heatmanagement !

Greets
Carsten

To be honest I do not know how long “my fix” will last on the carrier. The entire brass button assembly seems terribly weak and if you change batteries often without checking if there is full contact on the board, it may loosen without you knowing it (not everybody have a DMM) and then you are “buring” batteries. The whole soldering process reminds me of my black and white TV that I had in the late 70’s. You just looked at it, and the wires came loose. (Cold soldering.)

(So yes freeme, if the first batch buyers can get hand on an upgraded carrier I will feel much happier both for myself and all others.)

Hope for positive respond…

I want the carrier to be sold as an Sold separately.
Also do not forget the holster :smiley:

Agree…

About holster. If somebody if sitting in holster for/from NITEYE EYE30 it fits PERFECTLY. Even better than the NITECORE TM26 holster.

Thanks FreeMee, found your latest list at ENEDED - #1327 by freeme

All good (PS: just one for me, now knowing code will be good for either type).

Regards.

Wow I only just now found out about this… Sweet.

QUESTION: Anybody willing to let me borrow one of these to compare with some other lights in a video? I can pay a deposit and shipping costs both ways etc?

You might as well spend a little bit more for the entire light to make it yours. It is a very impressive light.

If they were available I would. I kinda need it soon :slight_smile:

Well you’ll probably going to get it afterwards anyway. :smiley:

P.S. Thanks a lot for all your videos; I enjoy watching them! :partying_face:

Alright guys tell me how does this work? I post which model I want and they will reserved a light for me? or how does this work.
If anything… I’m leaning the Nichia 219C…
500 lumens difference between XP-G3 and Nichia is probably almost not noticeable to eyes….? Saw a few video reviews I can’t really tell the difference between the 2… Both look great to me… But after reading 47 pages on here… I saw lots of people choose the Nichia for it’s CRI and the tint. So I think I’ll do that too lol

So sign me up for that Nichia 219C!

soon you will receive the coupon from freeme, use this coupon on Banggood when you order to drop the price

can anyone tell me what is the problem with current battery carrier? the brass button?