BLF GT logo discussion.

Voting for ‘Giggles’ on the battery tube :slight_smile: it is just funny and I like it.

Re-posted from the original BLF GT thread:

This light was conceived, designed by the Gentlemen in BLF which eventually decided to name it the GT.

The Giggles name does not qualify nor even has any bearing or connection to these Gentlemen’ hard work.

Hence, no other name is more fitting than the “GT”. Some other name might sound exciting, but they will have no historical value at all.

So my vote for BLF GT to be printed. (The design/font to be determined.)

No offense to Lumintop, but for me perhaps they deserve a bunny logo on the GT’s head, that’s all ( as the factory that made the Gentlemen’s concept/design )

All credit must go to where it’s due.

I like the GT letters what DEL wroted on the proto driver board. I like to look at it on the sire smooth areas one or two opposite sides.

+1

Nah, spell out “Lumintop” in Son’a.

*BLF
GT
Photon Emitter*

Either would look great, I think the 2nd one would look neat on the tailcap.

I agree, I like this one as well, this is what I was looking for on the tailcap.

For the round area under the button something like the E design above except with the bunny in the center instead of the other thing might work. Although we really need to fit lumintop in somewhere.

We also need the design as a printable format in high resolution. This is what we could not find.

HOSSenpfeffer

Texas Ace:
Lumintop logo can be on the tailcap end. Round logo at a round place looks good.

Unknown font on the Q8 logo, so i had to improvise a little for the letters GT.


I thought the logo was supposed to go on the flat spots on the body tube.

Actually it seems to make sense to have it on the head or tailcap, the flat spots on the body tube will likely not be aligned to the head so it ends up being one weird logo somewhere randomly positioned around the light

Are you a member of the BLF GT Team bobdotorg? I think your post is very disrespecful to the BLF GT team. If you want to suggest something do it on the GT topic and don't start a different post because it might create confusion. Did you even get on the list?

Meh, post 2 contains a disclaimer, and dedicated topics make it easier possible to find specific things later on.

We have no way to line up wht ebody tube or the head with the switch, so the only place that we can make sure it is always lined up in the area below the switch. This is the planned location for first logo with another one on the tailcap with the CE/rohs logos.

Why does it need to be lined up? It’s just a logo.
Almost every other flashlight has the logo somewhere on the body tube, regardless of it lining up with anything.

The “giggles” was on the body tube too.

logo definitely needs a smiley

Updated versions, font as in Q8 logo, some improvements…

2 versions, one with larger bunny symbol.
Q8 logo (version E) for comparison.

Now i’m going to sleep, it’s 4:31 AM here…

nvanlaar wrote: I like this. Create consistent BLF logo/branding that goes on all BLF custom lights. I like the Q8 logo.

Agree