First Convoy S2+ mod. Need advice

5 posts / 0 new
Last post
Ziggie
Offline
Last seen: 8 months 2 days ago
Joined: 04/10/2015 - 15:28
Posts: 8
Location: Kyiv
First Convoy S2+ mod. Need advice

Hello. I want to buid my first custom from Convoy S2+ and have some questions about driver. So, I want buy triple parallel xp-l noctigon mcpcb, aluminium or copper spacer and narrow carclo optic. Now I need advice about driver. It must be about 9A output – am I right? What exactly driver should I buy (if it posible, please post a direct link). Thanks.

Lexel
Lexel's picture
Offline
Last seen: 11 months 2 weeks ago
Joined: 11/01/2016 - 08:00
Posts: 5895
Location: Germany

There are DD drivers with a FET for low modes usually AMC7135s are used

Pretty common drivers are TA or BLF A6 drivers running Bistro

I am selling TA drivers with latest Bistro HD OTSM or classic TA Bistro

Ziggie
Offline
Last seen: 8 months 2 days ago
Joined: 04/10/2015 - 15:28
Posts: 8
Location: Kyiv

Thanks for answering, Lexel. How many lumens can I get with this drivers and for how many minutes on max? Does this driver have thermal control?

Lexel
Lexel's picture
Offline
Last seen: 11 months 2 weeks ago
Joined: 11/01/2016 - 08:00
Posts: 5895
Location: Germany

Bistro has thermal control
With XPL Hi V3 and High drain cell you should get 3000 lumens for sure

Ziggie
Offline
Last seen: 8 months 2 days ago
Joined: 04/10/2015 - 15:28
Posts: 8
Location: Kyiv

Lexel wrote:
Bistro has thermal control
With XPL Hi V3 and High drain cell you should get 3000 lumens for sure

PM send