Does it come in copper?
I think itās awesome that they were included from the factory, but Iām annoyed that they have failed after owning the light for one week. Not all that useful of a feature to include if it fails so quickly, but I think itās an awesome idea. I was just wondering if my situation was unique or if others experienced bypass failure so quickly.
Does what come in copper?
Well said, Dale. Thereās people I wouldnāt let into the same house with my guns. But like you, I was raised with a healthy respect for them as a tool for fetching squirrels, doves, ducks, deer, coyotes, etc. Never had them locked up growing up and never thought twice about it.
We just donāt seem to do as good of a job on training these days. Heck, I struggle with it with my own kids. You can constrain people for only so long, eventually youāll need to trust theyāll do the right thing when situations come up.
Soā¦ about that sweet new C8F 
Yeah, thanks to your encouragement to check at Arrow (Iāve used them before but so much is a quantity order, took some hunting butā¦) I have some XP-L2ās ordered that will, according to them, be here Saturday. Yeah right! Monday probably, but thatās soon enough anyway as all my gear is put up for the house full of people weāre about to have here.
Looking forward to a side switched triple C8 with 2ās in it!!! 
That will be nice! :heart_eyes:
tcv4, for spring bypasses to endure the wire needs to be coiled first, just slightly but enough for it to homogeneously compress inside the spring. Either this or it'll eventually crack after n cycles. 
Cheers ^:)
Soooo true! Yes this is what is MOST important! Some may not agree, but in my mind, itās actually more important than where the guns are kept.
.
My son is 10 and heās a pretty damn good shot! For the record yes a pistol could be sitting on the table here, but WITHOUT the MAGā¦ (I ALWAYS remove the mag and keep it where only I have access to it) And at the time of last nights episode it was sitting right beside me, right next to my C8F!
I do it this way instead of hiding it loaded, (locking it up would defeat the purpose) this way thereās never a loaded gun anywhere. And all the chef knives are in the block on the counter, right next to the car keys.
.
Out of spontaneity in my post (pre-edit) I mentioned picking up the pistol, but didnāt bother to outline all the specifics of how I operate. 
Wasnāt going to elaborate here and hope not to entice further derailment, but since Dale went firstā¦ :innocent:
Walked the big trash can down to the road for morning pick-up carrying the C8F with me. Itās really a nice light, easily carried, enough modes to cover a wide range of uses, some sheer power to belt out coverage at 250-300 yds. I ran it mostly on high, with some Turbo. It warmed up but didnāt get hot. The night was about 67Āŗ and humid, ground wet from a previous light shower with more promised. The more I use it, the more I like it, and the less action my other lights get.
Ewww.
Have you ever thought whatā¦ grungeā¦ lives inside those rather inaccessible slots that the knives slide into? :confounded:
I keep all my knives in a rather nice flat tray.
It not only has pads, theyāre populated and with resistors in place!
(My internet is acting wonky, swore I saw Jason ask about the switch pcbā¦ā¦)
Yeah I have. Canāt post my own photo right now (Photobucket :rage: ) But my āKnife Blockā is almost exactly like thisā¦
I have 2 of them identical side by side, holding a total of 12 knives. Soooo niceā¦the Acrylic panels are easily removed for cleaning!
I asked in post #30 and you already answered.
But remind me, what size boot do they use on the switch?
If I get one of these xpl versions Iād probably do a clear boot cover, custom color leds and maybe a TA driver with narsil.
I think I would like to use the SST40 leds on it, but Iām not sure how easy that would be. It would be nice if Mtn Elec could put them on one of his triple boards, but I donāt think he carries that led, yet.
Edit, I think he does carry the sst40, but maybe not a triple mcpcb that they fit on.
Flashlights, cars, guns, kids, knives. This is becoming a VERY diverse thread! :person_facepalming:
Those are all Dales favorite subjects!
There ya go!
Yeah, they were definitely slightly coiled from the factory such that the wire could bend in the middle. The wires are also super pliable being as thin as they are. They seem to have fatigued at the solder joint. Both sides went after maybe 10-20 cycles combined with carrying it in my pocket daily.
The C8F flashlight host? like the BLF X6 special edition.
Jason seems to know me quite well!
Looks to be 11mm for the actual switch button Jason. The SST-40 might require the holes in the reflector to be opened up, the XP-L2 is close in output and would fit without alteration.
Richard did have a 32mm MCPCB from Cutter that was triple XM footprint, that would work.
And yes, I too would love a full copper C8F
There was discussion on the SW cover in IMA4W review thread. Dimensions were listed. Stock cover is shallow, L6 fits but too high IMO. You can light under the stock SW cover, it is translucent.
Review: Sofirn C8F XPL (Pic Heavy)
TPad has an XM size board and Richard sells them. I canāt say it will work in the C8F reflector but it is the same LED circular footprint (Ledil Optic fitment) as the XP32 dale used.
TPAD XM / XHP50 32mm Copper MCPCB