[PART 1] Official BLF GT Group Buy thread. Group buy officially closed! Lights shipping.

Please add me to the list

is the strobe full throttle on this light ?

How long would you need to shine it into someones face untill there is permanent damage?

How many minutes till the room fills with the smell of fried chicken? :confounded:

Maybe you should write “Don’t look at the beam with remaining eye”

:innocent: :smiley:

Here's a Neoprene cover that should do the trick for the cold climates.

I ordered two sets

Def not the first to pay who wanted cells in the US. You are in the 50s on the payment list and im 18. I am pretty sure there are people before me who wanted cells.

So you either were lucky or didn’t get cells. Either way. I hope it gets there soon and safely for you.

:open_mouth: :open_mouth: :open_mouth: :+1: Way to cold for my blood.

UPDATES: It appears that the first couple of shipments are going out by region instead of the exact order in which we paid for cost reasons. Initial quality has been fantastic.

The first shipment of lights (168 total) shipped on Dec 23. This was a pallet going to the USA from the first 576th person on the paid list that did not include batteries. Tracking numbers went out on Dec 27 and lights started arriving to customers on Dec 29th.

There should be a European order going out in January.

The next group to purchase lights (#1000 and up on the list) will get their emails mid January instead of early January in order to let Neal get caught up with current orders.


BLF GT official support thread


Nvanlaar’s links.

The Millers Original Group Buy List ending on Nov 11 and #1213

Coyotehawk’s Continuation of the Group Buy List, starting Nov 11 and #1214 - Updated Dec 27

.
Neal’s Paid/Shipping List for first 555 - Updated Dec 15

Neal’s Paid/Shipping List for #556 to #1038 - Updated Dec 10 or 12.

.

M4D M4X: For all people who want to let us know the value that should be declared on the parcels:
please take the BLF GT customs declaration survey.

.
Samsung 35E seem ideal, high mAh and good amps. 8 of them for $40 with the GT.
M4D M4X is doing a groupbuy, here.

.

Video of Drop Test

.

I got 2 GT’s Friday, but was out of town till today. Fired up both GT’s and caught this smoker before it smoked my reflector up!

It only happened in Turbo, so I removed the head and let it run on Turbo a few cycles, and it seems to have cleared up. I guess this is the one I’m modding! :smiley:

You will be added. It will be mid January when you get the email with the purchase instructions.

Maybe flux residue burning up?

Let’s hope so…

Good to know though, i will hit the turbo first without the head on.
…but that will be in early Februari i guess… :person_facepalming:

O, Happy 2018 y’all. :partying_face:

Hmm , what are you going to do kwb ? :innocent:

That’s scarey! Happy you caught it. Did you just happen to be looking or were you specifically looking for this?

What did you use to get the head off and how difficult was it?

Looking up a few posts, there appeared to be flux residue on the wire solder points.

Yeah, it’s a little wet under the centering ring plate and top of the MCPCB that has a pretty good scratch across it.

Maybe let Lumintop know to clean it up a little bit…

Later I’ll reflow a XHP35HD E4-1A I de-domed I’m running the other E4-1A in a TN42 and it’s got a really nice neutral white spot, not orangey-yellow :confounded: like the stock HI.

Yep I always look for this problem, I had a few K70’s and I run in the de-domed XHP35HD’s just in case. Just put the head in a vise with plastic jaws, locked onto the flats, and just twisted the head off by hand.

Thanks! What was actually smoking then?

It was coming from around the base of the LED. Obviously flux from the re-flow,It plumed up pretty good for a while, it would have surely smoked up the reflector!

I saw flux residue back from first factory picture of driver and DTP boards, but thought they will clean up…
Ok some alcohol on cotton stick will do the job before first run…
Thanks for sharing Kawi :+1:

Happy New year everyone!
01:07 here

Thank you for the heads up, I probably will do the same… :+1: