Q8, PMS SEND TO THOSE WITH ISSUES BLF soda can light

Yeah… ImA4Wheelr’s comments kinda took/take me by surprise?? Maybe he is having a bad day or something. :wink:

All I was saying was that in the Q8 I found the ramping to be preferrable to preset levels. That is a personal opinion of course.

Maybe ImA4Wheelr has a problem with that?? From his response it would seem I had insulted his Grandmother or family linage. :smiley:
I honestly do not know what his comments were about or why. :person_facepalming:

If I had thin skin I might have had to seek a safe space…… but that does not apply. :smiley:

BUT…. I am thankful saypat mentioned the MELD, I had never heard of it. But is sure looks neat.

@ saypat

saypat…. ImA4Wheelr, (it seems??); has implied / accused me of replying to you in some type of insulting or disrespectful manner concerning the MELD Firmware. (I guess)

From your informative reply I do not think you took it that way at all.
BUT… IF you did. My apologies, all I had was a question about what it was; which you graciously answered with much appreciated info. :+1:

Thank you again!!! :slight_smile:

Thanks Joey… I appreciate that. Glad you didn’t “let it go” too. :wink:

One of my two Q8s is starting to act a bit odd.

I went to turn it on and the light ran through three or four modes, flashing the green switch light.
Pulled the batteries, problem went away.

Later I noticed the green switch light had gone off, with the light sitting on the table. Odd. It came back when I used the switch to go through several brightness levels.

One of mine from the first group does something similar but works normally after I use it a bit.

Are you using ramping or mode sets?

Mode sets were never fully fleshed out. They were a kind of an add on for those people who prefer it. So it can act a bit flaky sometimes.

Does it seem as if the switch got stuck? In mode sets pressing and holding the switch goes to turbo, strobe then the programming mode. Is that what it did?

happy to present MELD to any unaware of it. Sorry for hijacking the thread.

Q8 + Narsil = amazing!

It is impressive. :+1: … I don’t think you hijacked anything either…. :wink:
Thanks again saypat…… :+1:

Dual switch is the best MELD light!

What’s the most recent/best coupon code out right now for the BLF Q8??

Thank you!

M4DQ8 is still valid, price drop to 46.5$ (33.45$ discount) @ Banggood.

Thanks for the link steel_1024! Great pictures & read with good info to!!

That is some intricate work for sure. You guys who can do that have some impressive skills!!! :+1:

What can I say? Love my Q8. :smiley:

+1. Love mine too. After a few months of ownership, I’d say it’s my favorite overall flashlight. It’s very bright, has the best UI, tint, and battery life. My hat’s off to all involved with its design.

I was responding to teach's post. I misread his posts to be a slight at Meld. Whether I misread or not, my post was not appropriate. I apologize teacher.

No problem my friend, stuff happens. :+1:
And of course apology accepted totally. :slight_smile:

I was trying to say that in the Q8 I liked ramping better than presets.

I had never even heard of MELD but was interested & after readin what was suggested…. it is indeed impressive.

Anyway… I hope we are good ImA4Wheelr. I have always enjoyed your postings & look forward to enjoying more.

Best regards……… :slight_smile:

Unfortunately this fix only lasted about 48 hours before the LEDs both went back out. I fiddled around with the soldering iron again and they lit up, but then again died after a couple days.

Any recourse here for repair? I don’t think it’s the LEDs that are bad, as probing the contacts with a multimeter set to continuity mode lights them up bright as day.

Just replacing the switch for a new one as mentioned earlier.

Yeah, after posting I started looking back through the pages and saw that people contacted The Miller, who helped them get replacement assemblies. The Miller seems to have been offline for over a month though, so I see joechina stepped up to offer help. I sent them a PM and will follow up with an email to chendongling@banggood.com if I don’t hear a response. Will keep BLF updated!

I just ordered it from ThorFire via Amazon for $58.24 with free 2-day delivery. I hate waiting for the slow boat to arrive when ordering from China.