isti242
(isti242)
March 5, 2018, 2:34pm
2604
sparkyDK:
There was some changes not long ago, but i think that was more to allow for workers to have a exact o knife in their work pants and so on.
The 80 - 90 mm blade of a little folding knife are still a no go.
Some years ago they banned all but the smallest caliber air rifles due to some kids/ youth shooting at people with w .22 PCP air rifle, so the same stupid again ruin it for every one when a few make a mistake.
I was fortunate to learn a lot from one of the old black smiths, so for knife making i dident have to hit the books that hard.
The old smitty did put his foot down when i turned up with a nice length of Bofors steel wanting to make a samurai sword, so i cut it in 3 and made 3 nice stilettos instead.
Those 3 went like hot cakes among the gangster idiots i wasted my time with in those days, as if any of those pussies was ever man enough to walk up behind a person and plunge a knife into anyone :person_facepalming:
Actually the only gun action we ever saw was some idiot shooting himself in the foot.
Silencers sold well too, and all you need are a .22 and then press it against the skull before pulling trigger, no can needed for offing a person in broad daylight.
So the knife situation isn’t getting better but at least the Danish people are the happiest ones in the world according to several surveys.
Mentioning gangsters I think I’ll have to watch the movie “Pusher” (1996) again to get to know more about the Danish crime scene.
isti242
(isti242)
March 5, 2018, 2:49pm
2605
Wow, thanks a lot for the links! :+1:
I also bought a mini belt sander but I’m afraid it’s not good for any serious job. The other thing which still keeps me away is the heat treatment process. I must read/watch more tutorials about it before I’m ready to go.
isti242
(isti242)
March 8, 2018, 8:21pm
2606
weklund
(weklund)
March 8, 2018, 9:12pm
2607
Received these two beauties today …
Top: Ganzo F7562-CF
Bottom: Ganzo F7452-CF
Had to rush out the door and was only able to grab a few things.
Adahn
(Adahn)
March 10, 2018, 8:43pm
2610
Not my edc knife but I’ve polished and anodizedthe Fura Water Ripple for my job student and he carries it afaik.
I still carry my overkilled Malyshev Gnome
X31
(-X3-)
March 13, 2018, 7:40am
2612
Gorgeous, I just posted a comment on your blog
isti242
(isti242)
March 13, 2018, 1:53pm
2613
Thank you! The UTX85 is pretty but the king of the hill is the HALO V. :sunglasses:
raccoon
March 14, 2018, 4:17am
2614
Man, I wish switchblades with a 3" blade were legal in California!
isti242
(isti242)
March 14, 2018, 7:07am
2615
You can’t win all the time!
I could sacrifice this easily for living in California.
raccoon
March 14, 2018, 7:38am
2616
I don't live in the best part of California, but I do love it here.
raccoon
March 14, 2018, 7:40am
2617
I just noticed something very strange in the OP:
It says that I edited Dale's post two years ago, but I'm not a moderator, and I don't have that capability!
Newlumen
(Newlumen)
March 15, 2018, 1:08am
2619
I have been edc this $7 blade for almost one year… major upgrade is coming tomorrow. So please keep in touch with this thread.
raccoon
March 15, 2018, 2:39am
2620
Kershaw Knockout 1870OLBK!
Just got a new EDC knife. I have had a few of these, the quality is wonderful and this model is just a bit smaller than my other 2. I purchased my first one in 1995 when I was flown to the Wasp for a root canal while doing fleet workups when I was in the Navy. I cannot speak highly enough about these knives!
https://shop.myerchin.com/TF377P-Gen-2-Titanium-Crew-Pro-TF377P.htm
Newlumen
(Newlumen)
March 16, 2018, 12:02am
2622
I got my spyderco gayle Bradley 2. This will be my edc knife.