Review : KDLITKER C8.2 , 1*18650 xhp50.2 flashlight

Ask KD , i think they will find some spare .

Just got my Xhp35 version and it is rather nice. My third throwiest light, behind the Blf GT (obviously) and just slight behind the haikelite mt07s (much fewer lumens). Smashes my regular xpl-hi based convoy c8s, and even the new astrolux C8 with the A6 driver.

Without measuring, by eye comparison only (eg vs nightcore p30), I’m guessing 140k lux, and maybe just under 2000 lumens. Flicker on mode selection more exaggerated than the xhp50.2 version, and gets warmer though. Another compulsory addition to the budget light collection, and I think I’m cured of xpl based throwers. I’d consider the xhp35 hd version for a few extra lumens and smoother corona.

That’s strange, since my warm white XHP35 HI C8.2 was only 1240 lumens and 51kcd. Wonder if they changed the driver recently.

Tested my C8.2 with XHP50.2 and at 3min 30sec the hottest part of the head is only 105F/40.5C. I can’t test the amp draw accurately I don’t have a clamp meter, but the measured lumen output is in line with the rated specs in relation to my other lights so I know it isn’t under performing and just not getting hot. The other day I used it on high for an extended period of time while sledding, but it was probably cold enough outside to keep the light cool-to-the-touch.

I couldn’t resist ordering one. I ordered one yesterday.

That’s just too much light for the size to pass up.

Best of luck to you,

Created an order on Feb 22 (tail end of Spring Festival, holiday until 26th IIRC) for a KDLitker C8.2 with a XHP50.2 5000k, said in stock, ships in 1-3 days, I paid the $18 for express shipping too.

Heard nothing up until I emailed on 3/3 asking what my order status was to which they replied, this light is out of stock in 5K, if you want we can do 3k, 4k, or 6k. Now looking at the 5k product page, IT STILL SAYS IN STOCK. Either way, I sent back 4k is fine. They say it will ship in a few days, order marked shipped on 3/5, but no tracking number. I give it a few days.

Fast forward to 3/9, I emailed again saying I never got tracking despite being marked as shipped. They say, oh, we are waiting for 4k LED to be installed and tested and it will ship next week.

I contacted BanL last Friday (3/9) and he said he would check on it, no PM’s or shipping notices since.

I did 2 orders about a month and a half ago. None of the Tracking numbers worked for me. The first order got to me in 21 days from order. The second order they sent me half the order with a note in the package saying the rest of the order will be on its way. Then I got a email a week later saying we have sent you the rest of your order.
I should be getting the 2nd half any day.

I just made 2 orders yesterday. And received a email today saying the orders have shipped.

I have heard you will get your order from 3 weeks to 2 months, I’m patient.

Not sure how big their operation is employee wise but I’ve received my lights and I am happy with them.

Im usually pretty patient with cheap BG or GB shipping, but the expedited always gets here quickly. My issue is that it says shipped when the product isnt in stock, let alone wasnt built.

I fully expect a bit better service when im paying for faster shipping, and to be told something shipped when it isnt in stock isnt right.

So how do the C8.2’s perform?

Well, we will see what happens, I sent an email to cancel my order, and coincidentally it shipped that night.

Oh well, I was going to use the money to cover most of my BLF Q8 purchase, but looks like ill just have two nice lights

Between this and a Sofirn C8F, which would you choose?

Id probably still get the C8.2. More efficient, more power, boost driver.

I prefer single emitter lights though if I can find what I want

different size pills

The first i received was a a couple of months ago an XHP50 with a 23mm pill, the second i got today, a XPL with 25mm pill.

the first one had a textured finish i really liked and the new seems to have changed to a smoother finish. do we know if its changed across the line or just to suit the driver?

Not a very happy camper here, my C8.2 just arrived, and it doesnt work.

Im systematically taking it apart and testing things. the tailswitch and soldering seems fine, but other than that not sure what else to check.

Put the battery into it and used a Fluke DMM and its only passing .177A and doesnt seem to change modes.

Did you click the button on the tail(ON/OFF) button?

Is your battery charged?

:smiley:

In all seriousness, that sucks.

I ordered on a week or so ago, I hope it doesn’t turn out like yours. I’m sure it’s something simple.

A couple of lights that I have gotten in the past from various places did the same thing, I clicked the switch a couple times fast and I would bring them right to life with no problems since, and that was for the very first start up.

Good luck.

Keep us updated.

Tried with two fully charged INR18650-30Q, one button top, one flat.

Checked continuity and voltage with the light head off - Good
Checked amp draw with tailcap draw using DMM as switch, pulled .177A and no more, tapping to change modes does nothing.
Tightened all holding rings, nothing
I just finished taking the entire light apart and cleaned the sloppy mess of thermal compound off and am reassembling now, but I dont have alot of faith.

Really, REALLY angry and dissapointed.

do someone have xhp50 and xhp35-hi version ?
can we see a beamshot comparison ?

Hi

If you get any problem with the flashlight, you can send an video to show what is the problem with the light.

All the flashlights are being well tested before we had shipped out.

It has a lower chance to get both of the flashlights are having problem in the same package.

Thank you

Ban

One flashlight, video emailed to your support, and posted : https://youtu.be/nnsT4aObHzs