Interesting.
I do hope its not just a MF02 with a larger head, they should do more than that with this one.
But i am looking forward to learn more.
Not sure if the added bulk Vs performance ( MF02 ) / prize are worth it, but as i said look forward to learn more.
And i have signed up in the other thread just to be sure.
Pretty sure it will be the same as MF02 with a larger head. What is wrong with the MF02, great in my opinion. The larger head will give it a lot more throw.
nothing wrong, i like my MF02.
But just revamping the head seem too easy, but off course if there are no new wonder LED to put in it then there are little to do.
A actually like the simple UI of the 02, not that my Q8 confuse me.
Though i must say i would like a larger “handle” for such a big light, how about 2 × 3 26650 batteries and a non round battery tube, i like the non round battery tube of my nitecore P36
Hmmm……………I wouldn’t mind a MF02 body with a very large head with a 15cm reflector in it.
Wouldn’t mind at all.
.
“Anything to get more throw”.
Grtz
Nico
I’m with Nicolaas. If you could take the BLF GT, eliminate most of the spill, and make it cool white. That would be spectacular. Is it possibe to get a red led that could be swapped without an act of congress? the double 26650 in pairs to get an oval battery holder, kinda horsepower that could be used to heat your gloves with a carbon fiber pad and give light at the same time. That would make night hunting in winter a joy1
Interested only if the light has a warranty, many problems with the MF02. Banggood has a reputation of ignoring some customers with defective products. Just can’t take a risk of having a light that won’t turn on right out of the box.
Interested. But I want to see the specs. As someone mentioned, a bigger smoother reflector would be nice. And don’t forget to drive that sucker hard. Would active cooling be too crazy of an idea?
The blue stuff from MF02 did went open sometimes even with bare hands, mut this MF01 red stuff latest batch made my quick release hand wise break when tightening with pliers
Can you get more information about the driver and the brightness modes (And other hopefully hidden modes like blinkies SOS, momentary on etc) it has, I hope is a constant current regulated driver so it won’t dim as the batteries get depleted…
Well, the MF02 is not really a very good thrower, is it?
Its nice, I very much like the design, but it’s certainly not a top notch thrower, with around 400Kcd.
But I understand the beamshot comparison to show the difference between MF02 and MF04.
As long as it has a reflector of at least 120mm and the rest of the light is up to par and easily moddable
(and the price is right ofcourse…) I’m in.
Pretty sure it will be the same as MF02 with a larger head. What is wrong with the MF02, great in my opinion. The larger head will give it a lot more throw.
http://atvillustrated.com/files/logo.2013.yamaha.racing.blue_.jpg
nothing wrong, i like my MF02.
But just revamping the head seem too easy, but off course if there are no new wonder LED to put in it then there are little to do.
A actually like the simple UI of the 02, not that my Q8 confuse me.
Though i must say i would like a larger “handle” for such a big light, how about 2 × 3 26650 batteries and a non round battery tube, i like the non round battery tube of my nitecore P36
Intetedted. Wow, botched that one.
INTERESTED.
Carpe Diem
Hmmm……………I wouldn’t mind a MF02 body with a very large head with a 15cm reflector in it.
Wouldn’t mind at all.
.
“Anything to get more throw”.
Grtz
Nico
I’m with Nicolaas. If you could take the BLF GT, eliminate most of the spill, and make it cool white. That would be spectacular. Is it possibe to get a red led that could be swapped without an act of congress? the double 26650 in pairs to get an oval battery holder, kinda horsepower that could be used to heat your gloves with a carbon fiber pad and give light at the same time. That would make night hunting in winter a joy1
Interested..
Interested only if the light has a warranty, many problems with the MF02. Banggood has a reputation of ignoring some customers with defective products. Just can’t take a risk of having a light that won’t turn on right out of the box.
Interested. But I want to see the specs. As someone mentioned, a bigger smoother reflector would be nice. And don’t forget to drive that sucker hard. Would active cooling be too crazy of an idea?
Interested as long as the price is right
Nightcore ST-7
Astrolux MF-02
Astrolux MF-01
Utorch UT-02
Thrunite V6 catapult
BLF GT Gigathrower
Astrolux MF-04
Interested especially if it is based on the MF-02 and has a SS bezel
Please make Banggood stop gluing bezels on new lights with red locktite
A light this big with glued head is extremly hard to open
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
Any form of locktite do not belong on a flashlight.
The blue stuff from MF02 did went open sometimes even with bare hands, mut this MF01 red stuff latest batch made my quick release hand wise break when tightening with pliers
[Reviews] Miboxer C4-12, C2-4k+6k, C2, C4 / Astrolux K1, MF01, MF02, S42, K01, TI3A / BLF Q8 / Kalrus G35, XT11GT / Nitefox UT20 / Niwalker BK-FA30S / Sofirn SF36, SP35 / Imalent DM21TW / Wuben I333 / Ravemen PR1200 / CL06 lantern / Xanes headlamp
[Mods] Skilhunt H03 short / Klarus XT11GT, XT12GTS / Zebralight SC50+ / Imalent DM21TW / colorful anodisation
[Sale]
Drivers: overview of sizes and types
DD+AMC based drivers Anduril or Bistro OTSM 12-24mm, S42, 24-30mm L6, Q8, MF01(S), MT03, TN42
Anduril or Bistro 8A buck driver for 20-30mm, MF01/02/04, TN40/42, Lumintop GT, MT09R
UVC and UVC+UVA drivers
programming key
Remote switch tail DD board with FET
Aux boards:
Emisar D1, D1S, D4, D4S, D18, Lumintop FW3A, Fireflies ROT66, Astrolux MF01, Tail boards like S2+
Any updates on this light?
Astrolux FT03 XHP50.2
Astrolux EC01
Astrolux EC03
Convoy M3 3000k
Sofirn SP40 5700k
Sofirn SP40 3000k
Convoy L6 Mtn Elec D4 UI driver, XHP70.2
Utorch UT02 NW
BLF Q8
BLF A6 NW
BLF GT XHP35
BLF GT70 CW
Skilhunt H03 NW
Astrolux MF02 NW
Astrolux MF01 XP-G3
Sofirn SF14
Sofirn SP32A
Emisar D4 XP-L HI CW
SK68 knockoff
Mini Mag Lite 2X AAA
Convoy M1 build (4X XPL 3V MCPCB, Mnt Elec FET driver)
CNY is just over, the factories slowly restart...
i hope next week things going back to normal
(which already is very ddifferent to western ways
)
PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:
THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!
Interested.
Interested
Interested
Interested
Interested
Are there any more pics or information out???
I haven’t seen anything else.
I believe they were/are going to release it after the BLF GT sales are done.
Texas Ace Lumen Tube and JoshK Sphere calibrated with Maukka lights
Click this to go to signature links. I'm still around, just not reading many new threads.
I want it
Interested!!!
Hardusvd70
news!
MF04 NW - MF04 CW - MF02
PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:
THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!
Well well, looks like the body of the MF01 fits, noice.
Let’s hope the rest of the light is not as massive as the BLF GT (which is overkill with the use of one XHP35 HI), so to keep the weight a bit down.
BTW: I’d love to see some pics of the inside of the head, the led shelf, the thickness of it etc……..
Grtz
Nico
if i get a sample i will check
PLEASE NOTE
i do not work in "reviews, deals and codes" for the time being
maybe M4D M4X will return one day, but until then:
THANK YOU FOR YEARS OF YOUR SUPPORT AND FRIENDLY CONTACTS!
Can you get more information about the driver and the brightness modes (And other hopefully hidden modes like blinkies SOS, momentary on etc) it has, I hope is a constant current regulated driver so it won’t dim as the batteries get depleted…
The MF02 beam look diffuse and weak compared to the bigger dish lights
Well, the MF02 is not really a very good thrower, is it?
Its nice, I very much like the design, but it’s certainly not a top notch thrower, with around 400Kcd.
But I understand the beamshot comparison to show the difference between MF02 and MF04.
As long as it has a reflector of at least 120mm and the rest of the light is up to par and easily moddable
(and the price is right ofcourse…) I’m in.
Cheers
Nico
Pages