The english is not perfect but we understand it fine
I understand completely what you said jaxman
I will get one of these flashlights Thanks for your work!
Oh, and please consider to sell the flashlight host, because we like to make mods here
I want learn a good English ability from all of you.
I found it is hard to get the truth ability of foreign languages if you are not live in the place of that language.
Ok, since all of us are the man who love DIY, I fully understand what dear all are thinking.
Host is not a problem. but need some time, now we are too busy to making business. Later, we will make a link for the host.
That sounds very nice, thanks for making it possible!
Well done Jaxman! Well done!
+1 jaxman Thank you very much!!
if you use 14500,the E3 will lost low and middle modes, it will be only one modeāhigh mode.
hi, the design of anti-reversing of battery forbids full flat batteries to work.
So flat 14500 batteries can not be use in this flashlight. You can use 14500 with a little higher cap like AA batteries, and I have this kind of 14500.if dears cant get the battery,I can give you as a giftāāneed you leave a word in your orderā-only few pcs this battery.
while,if you use 14500, the E3 will lost low and middle modes, it will be only one modeāhigh mode.
I am worry about if you can know what I am sayingā¦
best regards
Thanks! Iāll likely order one and leave a message to request for button-top 14500ā¦ Hope shipping flashlight+battery to my country wonāt be a problem (unlike shipping of pure batteries)ā¦
jaxman:hi, the design of anti-reversing of battery forbids full flat batteries to work.
So flat 14500 batteries can not be use in this flashlight. You can use 14500 with a little higher cap like AA batteries, and I have this kind of 14500.if dears cant get the battery,I can give you as a giftāāneed you leave a word in your orderā-only few pcs this battery.
while,if you use 14500, the E3 will lost low and middle modes, it will be only one modeāhigh mode.
I am worry about if you can know what I am sayingā¦
best regards
Thanks! Iāll likely order one and leave a message to request for button-top 14500ā¦ Hope shipping flashlight+battery to my country wonāt be a problem (unlike shipping of pure batteries)ā¦
Single mode (high only) on a 14500, I take it youāre planning on modding with a different driver?
Anyone else think 22.5mm is kind of thick for an AA/14500 light?
Iād like to know where that measurement is taken, head, tail, or thickest part (anti-roll hex)
I have to wonder will it be much different in size from an E2 or S2+ w/18350
Anyone else think 22.5mm is kind of thick for an AA/14500 light?
Iād like to know where that measurement is taken, head, tail, or thickest part (anti-roll hex)
I have to wonder will it be much different in size from an E2 or S2+ w/18350
It looks like the E3 is not as lean as the Tool AA but still ok, and it is pretty short.
With the Tool AA, and with my 4sevens mini AA I have the feeling that if I drop it they could deform and the threading gets stuck, the E3 can be overrun by a truck.
beam0:Anyone else think 22.5mm is kind of thick for an AA/14500 light?
Iād like to know where that measurement is taken, head, tail, or thickest part (anti-roll hex)
I have to wonder will it be much different in size from an E2 or S2+ w/18350
It looks like the E3 is not as lean as the Tool AA but still ok, and it is pretty short.
With the Tool AA, and with my 4sevens mini AA I have the feeling that if I drop it they could deform and the threading gets stuck, the E3 can be overrun by a truck.
Yes I see that, looking at this photo Iād say maybe even overrun by a tank!
.
I wonder if the 22.5 mm is the thickest part (anti-roll hex) or the head or the tail?
Jaxman, can you confirm it?
.
Could probably even drill that tube out for 16mm:
ā¦ā¦ā¦ā¦ā¦ā¦ā¦.Max Discharge Current: 18Aā¦ā¦ā¦ā¦ā¦ā¦ā¦ā¦.
measured lumens with NIMH?
if you use 14500,the E3 will lost low and middle modes, it will be only one modeāhigh mode.
the driver PCB size is 17mm, and no glued, becase this model need not fixed the MCPCB.
I want to use 14500 and have all modes, plus some increased output (Nichia 219c)
So I was thinking to swap in one of this driver:
Qlite 7135*8 w/guppydrv or NLITE
or
Convoy 7135*8 w/Biscotti
Anyone have an estimate of max lumen output for nichia 219c with the 7135*8?
22.5 mm is the outdiameter of the head,not the anti-roll hex. Thank you.
This is what impresses me about Jaxman products. The quality is fantastic. They reveal the internals as well. This is something most manufacturers do not reveal.
Waiting for the host version!
I really like the new driver with moonlight mode and no memory.
Any chance of get this driver also with the host?