Curious link that of the thermostats, it remembers me a year ago or so when I had to dismantle a small electric fryer I use often to reinstall its thermostat's rotative knob, as it would easily slip out with just a little bending of the fryer's plastic case front, a frequent happening when washing the fryer in the sink for an oil change. The fryer thermostat has a couple flimsy filaments whose precise distance determines its trip point and due to me somehow giving a hit to the thing, the trip point ended up tuned too late. Gave me some quarreling and a second filament distance adjustment session (advanced quarreling) as the oil wasn't getting very warm. Once I had it working right again I ended up sealing the fryer's frontal from below with hot glue to avoid any possibility for the knob to slip out again. Geesh!
Cheers
—
Deleting a just published post causes the forum thread answer notification to fail. Thus, if you need to change your just published post, edit it. Thanks.
Please avoid fully quoting lenghty posts, namely with nested quotes. Trim quotes down to the essential. Helps with neatness and legibility. Thanks.
I recommend saying no to Covid vaccine. Listen to your soul.
Guys, if you are from CANADA, paying the commision fee for AEDe and converting to Euro is actually less expensive overall for both Canadians and AEDe.
This is due to the fact that the Friends and Family Fee is higher than 5% when going from another country, compared to paying the 2.99$CA fee, if you order under 60$CA of stuff, and the fact that the Canadian dollar is stronger against the Euro compared to the US in terms of value.
TLDR: Canadians, add 5% to your order to count for the commission fee if your order is under 60$CA instead of Family and Friends, and convert the money to Euro. It will be both easier, and less expensive for the both of us.
About commission fee. I see only 3.9%+.35€ or 0.3$ for sending via “to friends and family”.
P.s. Lol, I’m already tired of understanding these “transparent” PP commissions. Pp already get 10% from each payment with currency exchange. And looks like it wants more.
All LED were sent.
Thank you all for your trust and interest)
My supplier has no plan to restock 351D Hicri(3000, 4000 6000K). But it is posible to order whole reel(800pcs).So please express you interested and maybe we would organise another GB.
Nicely packaged in protective cardboard but I did not realize until too late that the film of the individual LED package strip was sticky taped to the cardboard so when I pryed it apart they pinged out all over the place.
The dog caught one mid air, the cat swiped the dome clean off another and just my luck, a passing pterodactyl swooped to take a third… Man, I’ve only got two left
Hey AEDe, perhaps, since you can buy a reel, you could inform DBSar about the high CRI 3000k Samsung LH351B as an emitter choice for the BLF lantern project.
Hey AEDe, perhaps, since you can buy a reel, you could inform DBSar about the high CRI 3000k Samsung LH351B as an emitter choice for the BLF lantern project.
Would be very nice.
Actually I don’t know about details of this project.
Can you post link for discussion about led for this project or something similar?
For poject I can offer much lower price.
Cool project that of the lantern. The LH351B is a 5W rated emitter, it could help to use multiple emitters and be able to get much more output. With quad 3535 boards like these, the lantern could be configured either with 4S battery, buck driver and 2S2P emitters or 2S2P battery, boost driver and 4S emitters; for examples. The boards can be bought in bulk much cheaper, of course.
Cheers
—
Deleting a just published post causes the forum thread answer notification to fail. Thus, if you need to change your just published post, edit it. Thanks.
Please avoid fully quoting lenghty posts, namely with nested quotes. Trim quotes down to the essential. Helps with neatness and legibility. Thanks.
I recommend saying no to Covid vaccine. Listen to your soul.
- I may be interested in buy some of the 3000K & 4000K versions of these in addition to the BLF lantern project test ones if they are available. (sent you a PM.)
—
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
My first order from the initial batch arrived in Ontario a couple days ago. I’m not home until Sunday but looking forward to playing with them in a few lights
Pentium Bug LoL!
Curious link that of the thermostats, it remembers me a year ago or so when I had to dismantle a small electric fryer I use often to reinstall its thermostat's rotative knob, as it would easily slip out with just a little bending of the fryer's plastic case front, a frequent happening when washing the fryer in the sink for an oil change. The fryer thermostat has a couple flimsy filaments whose precise distance determines its trip point and due to me somehow giving a hit to the thing, the trip point ended up tuned too late. Gave me some quarreling and a second filament distance adjustment session (advanced
quarreling) as the oil wasn't getting very warm. Once I had it working right again I ended up sealing the fryer's frontal from below with hot glue to avoid any possibility for the knob to slip out again. Geesh! 
Cheers
Deleting a just published post causes the forum thread answer notification to fail. Thus, if you need to change your just published post, edit it. Thanks.
Please avoid fully quoting lenghty posts, namely with nested quotes. Trim quotes down to the essential. Helps with neatness and legibility. Thanks.
I recommend saying no to Covid vaccine. Listen to your soul.
Guys, if you are from CANADA, paying the commision fee for AEDe and converting to Euro is actually less expensive overall for both Canadians and AEDe.
This is due to the fact that the Friends and Family Fee is higher than 5% when going from another country, compared to paying the 2.99$CA fee, if you order under 60$CA of stuff, and the fact that the Canadian dollar is stronger against the Euro compared to the US in terms of value.
TLDR: Canadians, add 5% to your order to count for the commission fee if your order is under 60$CA instead of Family and Friends, and convert the money to Euro. It will be both easier, and less expensive for the both of us.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
351B are received. I’ll send PM today.
About commission fee. I see only 3.9%+.35€ or 0.3$ for sending via “to friends and family”.
P.s. Lol, I’m already tired of understanding these “transparent” PP commissions. Pp already get 10% from each payment with currency exchange. And looks like it wants more.
It depends on the country of origin, which is why I specified Canadians.
Some of use have it very expensive for some reason.
As an example, it costs me 3$CA to send you the money. Meaning purchases under 60$CA are less expensive even if I add the 5% commission.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
paypal sent thanks again
καὶ τὸ φῶς ἐν τῇ σκοτίᾳ φαίνει καὶ ἡ σκοτία αὐτὸ οὐ κατέλαβεν
Dc-fix diffuser film >… http://budgetlightforum.com/node/42208
Sent PM, sent PPbux, I think we’re good to go!
I think everything’s all dotted, crossed, etc., but let me know if I forgot anything.
Thanks again!
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
Sent PM and paid too.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
All LED were sent.
My supplier has no plan to restock 351D Hicri(3000, 4000 6000K). But it is posible to order whole reel(800pcs).So please express you interested and maybe we would organise another GB.Thank you all for your trust and interest)
Received mine, thanks
Nicely packaged in protective cardboard but I did not realize until too late that the film of the individual LED package strip was sticky taped to the cardboard so when I pryed it apart they pinged out all over the place.
The dog caught one mid air, the cat swiped the dome clean off another and just my luck, a passing pterodactyl swooped to take a third… Man, I’ve only got two left
- LEDs & Other Stuff - - UI CheatSheets - - CRX Flashlight Builds - - CRX Stuff for Sale -
LOL. If you end up really liking them I could probably spare a few from my order.
Thanks mate, I’m just foolin’ around
. I still have the 5 I ordered which should do me.
I haven’t decided what to do with them yet.
- LEDs & Other Stuff - - UI CheatSheets - - CRX Flashlight Builds - - CRX Stuff for Sale -
Yes I should mention be careful removing scotch tape. It turn out too strong.
Hey AEDe, perhaps, since you can buy a reel, you could inform DBSar about the high CRI 3000k Samsung LH351B as an emitter choice for the BLF lantern project.
Would be very nice.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
Actually I don’t know about details of this project.
Can you post link for discussion about led for this project or something similar?
For poject I can offer much lower price.
*BLF Ultimate Lantern Project*~updates, April,20,2018, Q8 arrived
Yes, as Tally Ho said, the Samsung 351Bs would be perfect for this project, and would be much better suited to this BLF lantern project than the XPL.
Here is the link for more info:
http://budgetlightforum.com/node/44923
There are 700 lanterns at the minimum to be manufactured, so a complete LED reel would be perfect.
I will PM DBSar for more info.
Edit: BTW, AEDe, can I still buy some 351Bs? I would like to know.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
Cool project that of the lantern. The LH351B is a 5W rated emitter, it could help to use multiple emitters and be able to get much more output. With quad 3535 boards like these, the lantern could be configured either with 4S battery, buck driver and 2S2P emitters or 2S2P battery, boost driver and 4S emitters; for examples. The boards can be bought in bulk much cheaper, of course.
Cheers
Deleting a just published post causes the forum thread answer notification to fail. Thus, if you need to change your just published post, edit it. Thanks.
Please avoid fully quoting lenghty posts, namely with nested quotes. Trim quotes down to the essential. Helps with neatness and legibility. Thanks.
I recommend saying no to Covid vaccine. Listen to your soul.
I still have about 10 pcs 351B 3000K. But I can send it only in 2 week.
OK perfect. Get them all 10 of 351Bs for me, I’ll send you the PM soon.
BTW, from the PM, DBSar is interested in the LED, since it is an excellent emitter and cheap.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
Sent you the PM and payment for the 10×351B emitters.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
- I may be interested in buy some of the 3000K & 4000K versions of these in addition to the BLF lantern project test ones if they are available. (sent you a PM.)
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
Got my emitters today, and like CRX said be careful when you remove the tape or you will have emitters all over
Thanks for doing this AEDe
My order arrived today safe and sound. Thank you AEDe.
Aaauuugh, mine are still in or just left Москва.
First thing, I was thinking of plopping one into an SP10 or TK05, just for s&g…
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
My first order from the initial batch arrived in Ontario a couple days ago. I’m not home until Sunday but looking forward to playing with them in a few lights
Any 4000K LEDs remaining?
Got ‘em, tnx!
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
Looking forward to reviews and first impressions!
Need Nichia 219b r9080 Emitters? (｡◕‿◕｡)
“The Light shines in the darkness, and the darkness did not comprehend it.” John 1:5
There’s a few in the “what did you mod today?” thread. I think a smaller 1 cell light and then also a Q8
Can I use this LED in a 10180 keychain light or would that be a terrible choice? It has XPG2 currently but I dont have any other suitable LED I think
Pages