GB 351D closed.

Thanks mate, I’m just foolin’ around :slight_smile: . I still have the 5 I ordered which should do me.
I haven’t decided what to do with them yet.

Yes I should mention be careful removing scotch tape. It turn out too strong.

Hey AEDe, perhaps, since you can buy a reel, you could inform DBSar about the high CRI 3000k Samsung LH351B as an emitter choice for the BLF lantern project.

Would be very nice.

Actually I don’t know about details of this project.
Can you post link for discussion about led for this project or something similar?
For poject I can offer much lower price.

BLF Ultimate Lantern Project~updates, April,20,2018, Q8 arrived

Yes, as Tally Ho said, the Samsung 351Bs would be perfect for this project, and would be much better suited to this BLF lantern project than the XPL.

Here is the link for more info:

There are 700 lanterns at the minimum to be manufactured, so a complete LED reel would be perfect.

I will PM DBSar for more info.

Edit: BTW, AEDe, can I still buy some 351Bs? I would like to know.

Cool project that of the lantern. The LH351B is a 5W rated emitter, it could help to use multiple emitters and be able to get much more output. With quad 3535 boards like these, the lantern could be configured either with 4S battery, buck driver and 2S2P emitters or 2S2P battery, boost driver and 4S emitters; for examples. The boards can be bought in bulk much cheaper, of course.

Cheers

I still have about 10 pcs 351B 3000K. But I can send it only in 2 week.

OK perfect. Get them all 10 of 351Bs for me, I’ll send you the PM soon.

BTW, from the PM, DBSar is interested in the LED, since it is an excellent emitter and cheap.

Sent you the PM and payment for the 10x351B emitters.

- I may be interested in buy some of the 3000K & 4000K versions of these in addition to the BLF lantern project test ones if they are available. (sent you a PM.)

Got my emitters today, and like CRX said be careful when you remove the tape or you will have emitters all over :wink:

Thanks for doing this AEDe :+1:

My order arrived today safe and sound. Thank you AEDe. :)

Aaauuugh, mine are still in or just left Москва.

First thing, I was thinking of plopping one into an SP10 or TK05, just for s&g…

My first order from the initial batch arrived in Ontario a couple days ago. I’m not home until Sunday but looking forward to playing with them in a few lights :smiley:

Any 4000K LEDs remaining?

Got ’em, tnx!

Looking forward to reviews and first impressions!

There’s a few in the “what did you mod today?” thread. I think a smaller 1 cell light and then also a Q8

Can I use this LED in a 10180 keychain light or would that be a terrible choice? It has XPG2 currently but I dont have any other suitable LED I think