- USD 2,8 x 30 pcs = USD 84
- shipping USD 5
Paypal: virence.cle@gmail.com
- Clemence
Update 180528: Table updated for simpler viewing.
- Clemence
Payment Sent for 6 x sw40 + $5 international shipping
Thanks!
…rated at 9050 not 9080, but Maukka test showed it’s 9598….
- Clemence
Oh, dear, that’s 9598? I had been hesitating ordering any due to holding out for higher R9. (I missed when Yuji used to have something similar). Now I won’t be able to do that any longer! How exciting!!! I MUST have high-R9 candle-CCT LEDs!!!
I would like please:
10 of the SW45K (these are entirely consumed in populating the MCPCBs I ordered in the store)
and:
15 of the SW40. (9) used on the MCPCBs and 6 sent as bare emitters.
PayPal sent for $65. The last $5 comes from the extra shipping charge I’ve already paid due to placing 2 separate store orders, with all 3 orders shipping together. I hope this isn’t too confusing. Thank you again!
I’d like to order 3 × SW45K reflowed on Noctigon XP16 MCPCBs, please:
3 × SW45K at $2.80 = $8.40
3 × Noctigon XP16 at $1.85 = $5.55
3 × LED reflow service at $0.50 = $1.50
plus shipping at $5.00
Total: $20.45
PayPal sent, and thank you for doing this!
I may have to bite this bullet a bit…
Sign me up for 4x SW40s and 4x SW45s, which is 8 × $2.80 = $22.40 + $5 S&H = $27.40 grand total.
Payment to virence.cle@gmail.com for an item or a service, doesn't it? Any further details?
Thank you :-) in advance.
Cheers ^:)
PayPal sent for the following LEDs
7x SW45K 19.60
7x SW40 19.60
Shipping 5.00
——————-
$44.20
I may have to bite this bullet a bit…
Sign me up for 4x SW40s and 4x SW45s, which is 8 × $2.80 = $22.40 + $5 S&H = $27.40 grand total.
Payment to virence.cle@gmail.com for an item or a service, doesn’t it? Any further details?
Thank you in advance.
Cheers :partying_face:
Yes, that’s correct Barkuti
- Clemence
Payment sent for 4 of each led, 1 Noctigon 3XP with 2xSW45 and 1xSW40 mounted on it. And 5 shipping…
So, 31.90 sent.
Thanks Matt
Payment sent for 4 of each led, 1 Noctigon 3XP with 2xSW45 and 1xSW40 mounted on it. And 5 shipping…
So, 31.90 sent.
Thanks Matt
Revised:
- sw45k & sw40: 8x USD 2,8 = USD 22,4
- Noctigon 3XP [PO]: 1x USD 3 = USD 3
- Soldering service for 1x Noctigon 3XP [PO] = USD 0,7
USD 0,8 refunded
- Clemence
Update for my order: 4x SW40s + 6x SW45s, grand total $33.
Payment just sent.
Cheers ^:)
Can you reflow them on matching 16mm MCPCB and how much would this cost extra per LED?
Can you reflow them on matching 16mm MCPCB and how much would this cost extra per LED?
Yes I can. For pricing on reflow service you can open and simulate your plan here:
https://www.virence.com/product-page/led-reflow-and-or-soldering-service
- Clemence
Great, would take 10 x sw45k and 10 x sw40.
So 2 x 28$ = 56$
Three of each on Noctigon XP16.
So 6 x 1.85$ = 11.1$ for MCPCB and 6 x 0.5$ = 3$ for reflow service.
Plus 5$ shipping.
Total would be 75.1$ then.
If I did the math correctly I would transfer via Paypal this evening (Europe here).
Great, would take 10 x sw45k and 10 x sw40.
So 2 x 28$ = 56$
Three of each on Noctigon XP16.
So 6 x 1.85$ = 11.1$ for MCPCB and 6 x 0.5$ = 3$ for reflow service.
Plus 5$ shipping.Total would be 75.1$ then.
If I did the math correctly I would transfer via Paypal this evening (Europe here).
All = Correct
I’ve made two orders so far, first here and second here. I’m sorry to make my order so complicated, but I’ve decided I need even more SW45k emitters.
I’ll take 12 more SW45k emitters, two Noctigon 3XP parallel MCPCBs, and two reflow services to load them with 3 LEDs each. $41 sent.
This brings my total order to:
24x SW45k emitters ($67.20)
2x Noctigon 4XP V2 parallel MCPCB ($6)
2x Noctigon 3XP parallel MCPCB ($6)
4x reflow service ($2.80)
international shipping ($5)
I’ve now sent three separate payments, $38.60, $7.40, and $41 = $87.
Thank you again for making these available, clemence. I promise I’m finished adding to my order! :partying_face:
RyusLightworks:Great, would take 10 x sw45k and 10 x sw40.
So 2 x 28$ = 56$
Three of each on Noctigon XP16.
So 6 x 1.85$ = 11.1$ for MCPCB and 6 x 0.5$ = 3$ for reflow service.
Plus 5$ shipping.Total would be 75.1$ then.
If I did the math correctly I would transfer via Paypal this evening (Europe here).
All = Correct
Payment sent.
I would like:
15 x SW45k $42
15 x Noctigon XP16 $27.75
shipping $5
Total = $74.75
Paypal sent, and Thank you!
adam7027:On a side note, if the sw45k will eventually run out, do you plan to stock some alternate 4500K-ish Nichia emitters with 3535 footprint? (I know, that 319A is at most R8000, but could be useful, if someone seeks a balance between output and color fidelity)
The closest match to 219B D220 sw45k R9080 is E21A D220 sm4550e R9080. But this particular CCT/tint is only available in very small sample quantity (100 pcs at most) or …… approximately a million pcs. Those sextant binning is only made to order.
So, for our needs we will have to live with E21A D220 sm453 R9080 or cherry pick ourselves from the sm455 or sm457 reel. There’s another option: wait for special requests from big companies such as Panasonic, Toshiba, or GM.
FYI, Nichia made special 149AM R9080 (unavailable to normal public) specifically for Panasonic’s stadium lights. HD TV football broadcasting is a big business in Japan.- Clemence
The sm4070e for 219C (which is listed as out of stock on your site) was from a big company special request like this?
How often can you observe and join to these?
Btw, once I manage to set myself up to do simpler reflow jobs, I will take the opportunity to try as many as possible emitters in different lights (I will pull the trigger on a hot plate soon, hopefully)