(prototype) the GT Mini

Interested in one or two :slight_smile:

I want one as well

Best regards Tom

I’ll take 1 for sure!

Maybe 2 depending on the price. I’m interested to know more about the driver for sure.

LOL yes the micro GT also has interest

I’m in.

Interested

I’m also interested in one.

In for 1

in for 1

It seems to be a C8 with additional side switch and good narsil firmware. For that it have to be not too expensive.
Whats with the driver? Is it a Fet + N + 1 or Fet +1 or Buck, …?

Not so into the micro, maybe a pic of it in hand will change my mind.

Should I wait for the Mini GT or pick up a Thrunite Catapult V6 in the meantime? My finger itching to click on a buy button.

Here you go, from post #1.


.

A buck driver would also be really nice because rumor has it, the Nichia 219D has characteristics that are likely to be very good for dedoming. It also has pretty low forward voltage, which would make a FET driver inefficient at best, and possibly destructive.

I was referring to the micro you mentioned/pictured here

I’m for sure picking up a couple Mini GTs.

thanks for quick reply. :smiley:

please use the signup list for the groupbuy if you want to get one. :)

(sorry, but i cannot count the "interested in xx" posts above)

Oh, you said micro. These unofficial names are tricky. The micro version seems very unpractical to hold. It looks neat, though. Lol

this light is cryng out extremely loud for a dual switch option- it could became perfect this way
Martin is there any chance to be made dual swtich? Its kinda useless this way, we have too many side switch throwers nowadays…what a waster relaly!

Same story as Emisar DS1….they never listen….

In for one - signed list

Thanks

i added some pictures to post #2

measured 1250 Lumen (CB, compared with C8s @900Lm and D1 @1200 Lm)
measured 145000 cd (@3m compared to C8s / acebeam L16 / Imalent RT35 / Emisar D1)

Signed but what different from D1S ?