Simon does, you just has to message him. I bought mine as a host.
Mine came in!
Host or complete light?
Complete light.
what a beautiful light
Got my copper S2+ in only 14 days. What a beauty.
Needed only a black boot and a spring-bypass in the tailcap section and presto!
The other lovely lady is my new Enogear SS ECD (yep, with reversed clip)
EDIT: Sorry, the white-balance of this picture is incorrect. The lights are standing on a white piece of paper!
This copper limited edition is begging for a copper 18350 tube. Is there anyway to convince Simon to make one??
does anyone know diameters… I’d like a clip like this… I prefer a mounted clip to a snap on clip…
The diameter of my copper S2+ is exactly 24mm and the recess for the clip to go in (on tailcap) is exactly 23mm
Hope this helps
I got a copper S2+ with Biscotti and 7A XPL HI. It’s a gorgeous light!
I think it needs some ano removed from the battery tube too.
As edited: the white-balance is quite a bit off. This is not a stock green short tube but a blue short tube.
Baked 30 min. at 300’C. Salt and peppa added. It has a vague green hue over it.
Once again: white-balance. These lights are standing on a very WHITE piece of thick watercolor paper.
Hail Dale. We’re not worthy! (Just kidding)
This looks indeed more like the color I saw with my poor old eyes.
No problem, I literally opened it up in Lightroom and clicked Auto White balance on the slightly shadowed bit of white paper between lights (near 18% grey).
White balance is my life. (Read… expensive wedding dresses MUST look right!)
I received my copper S2+ with a NW XPL HI and smooth reflector.
I’m glad for this copper limited edition…
However the beam looks like a fried egg with a very yellow center spot.
I have yet to see how it looks outdoor, but i’m a bit disappointed.
Standard for S2+es. My first 4C I was sure was way warmer than that, ’til I used it tailstanding, and it was quite a beautiful color/tint.
That’s when I noticed that the spill is quite blue and the hotspot quite yellow, due to angular-shift of the tint.
Stick a 20mm TIR in there, and you’ll be really happy.
Thanks for the tip.
I’ve never tried the switch from a reflector to a TIR optic.
Any recommendation for a good source that would fit the S2+ and XPL HI?
Dammit patmurris, before I read your post I didn’t notice the egg :laughing:
Due to a miscommunication I now have both a smooth and an OP reflector, gotta try the OP one and see if it’s better. It is one gorgeous light though.
Subscribed for batch #2, would love an S2+ in copper. And an 18350 tube too, hopefully!