I messaged Dale back on March 25th about a replacement driver.
Maybe he will contact us step by step in the order of inquiries.
Dale told me that he will mail me the new driver in 3 to 5 days that is 3 days ago. I will email him again next Monday for the tracking number. He responded all my emails pretty quick.
I received an email (not PM) from Dale yesterday, June 6, stating the drivers were available and requesting confirmation of my shipping address.
This appears to be in response to a thermal test report that I emailed to him on March 13 regarding my XHP35 MT09R (at Terrys request). It looks like he kept that email as a tickler, and replied to it when the drivers became available.
Dalevwanted to send me a Driver if ist aviable. Did not recieve a shipping notice. Asked Dale on 19. About shipping, but did not get an answer.
I postponed contacting Dale regarding the new driver. No hurry on this side, and I’m sure it’s hectic busy at Haikelite. New MT09R with improved driver should soon hit the stores, and people should receive the new driver soon hopefully. I’ll check that out first.
On a side note, I just came back from a midnight hike in the woods with both my original MT09R 70.2, and good grief the output and beam is just a dream. It’s a stunning light alright, and I’m glad mine work well.
Oh yeah.
And while the color rendition is not as beautiful as my newly modded BLF Q8 LH351D, color rendition is still good at 80CRI.
And momentary is still so fun to play with.
Yeah… but your Q8 is not BLUE.
I ordered new M09R.
It has new driver Texas Avenger.
I recived new drivers to my MT09R ordered from group buy.
Tonight I ’ m going to measured lumens from new MT09R and compare with my modded MT09R from group buy.
Man that’s awesome! If possible I would like to see pics of the old and new driver. 
cool man… still waiting for mine.
I suspect it will arrive soon.
I don’t have old drivers.
I swapped oryginal from MT09R to MT03.
I can add pictures of new drivers in flashlight and alone.
How to add miniature on post??
EDIT
I found Picture of old drivers soo I add it too.
Oryginal driver from group buy Imgur: The magic of the Internet Imgur: The magic of the Internet
New driver
Imgur: The magic of the Internet
Imgur: The magic of the Internet
Imgur: The magic of the Internet
Wow. It’s real. The spring bypass is there too…
Here you go.
From smokuxx1987:
Original driver from group buy.
New driver.
.
How can you tell the difference between the 70 and 35 version?
I don”t have version on XHP35HI
It’s easy hklarnoob.
Just look at the die size of the LEDs while off of course.
It’s easy to spot a 3535 LED vs a 7070 LED.
Yeah but there’s nothing I can see on the driver that says the driver is for the 70 version.
Yeah, the old xhp70 driver had lots of 7135 chips, the new one doesn’t.
At the expense of possibly looking like a fool, is it possible the drivers are interchangeable with the emitters determining the amp draw/load?
One is 12v, one is 6 volt and the MCU is 3v so I assume you have to use a different voltage divider between the 2 drivers.
I think TA said he had to tweak NarsilM to get it ramping just right, but…
I’m gonna just be quite and maybe TA will come along and explain all our questions. 
(I showed TA this thread)