It’s located ~ 200 km from my place, should be safe. “Usually” it just mild tremors and ash shower.
- Clemence
It’s located ~ 200 km from my place, should be safe. “Usually” it just mild tremors and ash shower.
- Clemence
Glad to hear you should be safe
Exciting! Are you sending any to Maukka for testing? I might add to my order again.
Exciting! Are you sending any to Maukka for testing? I might add to my order again.
I will when those 20mm boards arrived
- Clemence
Will there be both VR20SP4 and VR20S1, or just VR20SP4? I am very tempted to try a 144AM in a Convoy C8 host, or anything better suits that.
Yeah. I will probably order 4x20mm MCPCBs when they will arrive, along with 1x144AM and 2xE21A quads.
Sorry to disappoint you guys. It’s VR21P4 (Optisolis only) and VR21SP4 (E21A only).
- Clemence
Wut. Is there a reason to this or something?
Wut. Is there a reason to this or something?
Reason for what?
To all:
FYI the progress can be monitored in the Gsheet. I prioritize the non soldering orders first for faster workflow.
- Clemence
Oh I was speaking about the lack of 144A 20mm boards.
Oh I was speaking about the lack of 144A 20mm boards.
Too little demands for 144A MCPCB. Because to make new MCPCB type cost me lots of money, I prioritize the highest demand first. Step by step. 144A and 119x board could be my next move.
- Clemence
Ah okay.
Thanks anyway. I will wait for it to come out, then order all at once to minimize shipping costs.
Thanks a bunch Clemenceau!
Clemence, can you change my order regarding the 4xE21A 4000K on 16mm PCB? I would really prefer the new 21mm PCB (also 6V). Seems like perfect timing :).
Clemence, can you change my order regarding the 4xE21A 4000K on 16mm PCB? I would really prefer the new 21mm PCB (also 6V). Seems like perfect timing :).
This is your lucky day. I’m about to start soldering (again). It’s been my routine in the last three days. And you’re lucky yours not yet started.
- Clemence
The_Driver:Clemence, can you change my order regarding the 4xE21A 4000K on 16mm PCB? I would really prefer the new 21mm PCB (also 6V). Seems like perfect timing :).
This is your lucky day. I’m about to start soldering (again). It’s been my routine in the last three days. And you’re lucky yours not yet started.
- Clemence
Wohoo!! :partying_face:
Thanks!
New order No. 10238
Can you ship with 219B?
New order No. 10238
Can you ship with 219B?
Yours already dropped to the post office today. We’ll see tomorrow.
I dropped 40+ non soldered packets there today. Hopefully they haven’t stamped it.
- Clemence
Separate mail is fine.
I dropped 40+ non soldered packets there today.
Wow, you’ve been busy!
Does your cute furry assistant help you carry shipments to the post office?
I wish …