Rofis JR10 Triple, Lighted side switch, Rechargeable

Triple XP-G2 S42B on Noctigon
Carclo 10507 TIR
ARC glass
GITD bezel
22mm MTN FET driver
Electronic lighted side switch
Magnetic tail
Micro USB charging port (600mA)

Length - 102 mm
Width - 24 mm
Weight - 107g (with cell)
Max around – 2200lm OTF

One of the first lights I bought when coming to BLF. I have been wanting to put a lighted switch in this for a while. I did the triple & FET driver mod a while ago.

I used a new technique here (to me) to enable the green LED light to show through the black switch boot.

I punched a 4mm hole in the centre, placed an 8mm x 0.5mm clear silicone disc behind it inside and then some GITD powder mixed with clear silicone to fill the hole. The internal disc was siliconed in place too.

Charging current is around 600mA. Red & green indicator light.

I shortened the tail cap, cutting off the lanyard attachments and installed some magnets.

18650 version.

I like that green light switch. Eye catching

Was there some empty space inside to put the charging board ?

Yeah just enough room to fit a wee ME4056 type.

Noice. Rotating heads don’t interest me but this looks like it’s been modified to a point I might like it. :+1: