Probably just took the case off your blu-ray player. You cant fool me!
Wait, what? I have a Blu-Ray player? Oh yeah! I do, in my computer!
The yellow jacket nest that I fried with it this afternoon didnāt get fooled much either. Mwwahahahahahahahahaha!
Iāve had a few lower end lasers, but Iād love to have one on the higher end like that. Objects are only as dangerous as the person holding them.
And human error is a fairytale?
Iām more at risk cutting bits of metal with my angle grinder or driving on the highway with hundreds of others than holding a laser in my hand. Much like a gun I would not point it at myself or others itās fairly common sense. This isnāt the place for this, however. Nice laser DB :+1: I look forward to how white laser technology could impact the long-range flashlight world.
Human error is real, but its something that happens to other people. :person_facepalming:
You donāt even need to point it at yourself to be blinded. Even a slightly reflective object is enough to burn your retina faster than your blink reflex. Laser protection goggles also only block from the front, it is still possible for the laser to enter your eye from the side.
Iām glad you mention this because all this gun comparison doesnāt really do it justice. A laser is constantly firing and reflecting off crap as you move it, unlike a gun.
A laser may merely burn skin or clothing, while a ricocheting bullet rips people a new arsehole! The laserās only real claim to danger is a direct retina hit, which is of course a real danger but not so easily accomplished whether by intent or by accident. I have had the tail switch accidentally on when loading cells into my blue laser, the laser fired within an inch of my hand and burned a tiny blister that stung for hours. Had that been a gunā¦ well, obviously Iād have a hole through my hand AND the very real possibility that an innocent bystander could have been hit by the bullet after it left my hand. The laser goes through people to hit people behind them? Like, NOT! Depending on the firearm and the situation, many people and/or property are at risk for quite a distance from that one accidental discharge. Case in point, pray you never accidentally fire a .454 Casull, a 300 grain bullet that travels 2000 feet per second!
Safety goggles that wrap around protect the eye from all directions, depends on what you purchase I guess and if you even wear them at all. I normally donāt wear them as they render the amazing beam invisible which makes it all a moot point. I HAVE been wearing quality goggles while frying the yellow jacket wasps right outside my window as Iāve been getting them through the glass.
I donāt kill wasps with the laser for fun or meanness, I am highly allergic to them and to leave them in place could get me dead instead of them. So I eradicate the ones that build nests too close to where I make ingress. I leave many thousands of them alone in spite of the danger to me when I mow.
X3, donāt ya just hate the waiting game? As many parts as I have here I too am waiting on a couple of specific items in order to complete the next build. Canāt really even get started without this one piece that locates everything else, a new LED reflector to put in a Maglite Classic.
X3, donāt ya just hate the waiting game? As many parts as I have here I too am waiting on a couple of specific items in order to complete the next build. Canāt really even get started without this one piece that locates everything else, a new LED reflector to put in a Maglite Classic.
Come on, were you in my home the last weeks or what ?
I was waiting for an aluminum SST50 reflector from FT, because itās what place the LED board, hence the aluminum pill that I have to latheā¦ and everything else.
A laser may merely burn skin or clothing, while a ricocheting bullet rips people a new arsehole! The laserās only real claim to danger is a direct retina hit, which is of course a real danger but not so easily accomplished whether by intent or by accident. I have had the tail switch accidentally on when loading cells into my blue laser, the laser fired within an inch of my hand and burned a tiny blister that stung for hours. Had that been a gunā¦ well, obviously Iād have a hole through my hand AND the very real possibility that an innocent bystander could have been hit by the bullet after it left my hand. The laser goes through people to hit people behind them? Like, NOT! Depending on the firearm and the situation, many people and/or property are at risk for quite a distance from that one accidental discharge. Case in point, pray you never accidentally fire a .454 Casull, a 300 grain bullet that travels 2000 feet per second!
Safety goggles that wrap around protect the eye from all directions, depends on what you purchase I guess and if you even wear them at all. I normally donāt wear them as they render the amazing beam invisible which makes it all a moot point. I HAVE been wearing quality goggles while frying the yellow jacket wasps right outside my window as Iāve been getting them through the glass.
I donāt kill wasps with the laser for fun or meanness, I am highly allergic to them and to leave them in place could get me dead instead of them. So I eradicate the ones that build nests too close to where I make ingress. I leave many thousands of them alone in spite of the danger to me when I mow.
Powerful lasers do not need a direct hit to damage your eyes. Diffuse reflection is enough.
With a gun everybody knows that itās very serious and not a toy. With lasers this is different. Most people donāt realize the danger.
A blue or red laser is much more powerful than your eyes make you think. This is because the human eye is not very sensitive to these colors (wavelengths). The difference between 555nm green and some shade of blue can be up to 20x for the same wattage.
Today, I modded nothingā¦ Iām waiting for partsā¦
It looks like you have parts, many many many parts.
I havenāt modded anything lately because Iām making tools. Solder paste stencils, to be specific.
I dragged out our little used vinyl cutter (Silhouette Cameo 2), found some useful open source software called gerber2graphtec and did some test cuts for Lexelās variant of TAās 17mm driver on some heavy, scrap vellum. When that looked good, I ordered some 4mil mylar sheets. The sheets arrived yesterday and I cut stencils for 3 different sizes of the driver. Iāll give them a trial run tonight.
Iām also planning to use it to make a stencil to apply solder mask to copper discs to aid in the precise positioning of 10mm sinkpads in order to create custom triples and quads.
I donāt kill wasps with the laser for fun or meanness, I am highly allergic to them and to leave them in place could get me dead instead of them. So I eradicate the ones that build nests too close to where I make ingress. I leave many thousands of them alone in spite of the danger to me when I mow.
Hey, just talk to that lady in California who almost got killed by those thousands of African-American bees that swarmed her. Bet she wishes sheād bought propane-tanks filled with Raid to exterminate them all.
And I know someone who got swarmed by YJs while pulling up weeds; they built nests in the ground.
Well, this should have been an easy mod, but it turned out it wasnāt
With special thanx to BLF member Djozz who did reflow the noctigon twice.
First, i had some issues ordering a spacer, which took more then a month. Luckily BLF member Kiriba was very helpful with ordering and shipping.
Djozz offered me the mcpcb and XPL2 leds for a more then fair price and was even willing to reflow them for me.
After assembly i wanted to clean the LEDs and ended up with a dome on my cleaning clothā¦
Luckily Djozz was willing to reflow them again, so i had to order a new Led.
After sending it back to Djozz again he even did fix the BLF X6 driver for me so it can be used with the triple X6.
Today i had finally some time to assemble it again and luckily it worked out great this time.
Thanks again Djozz !
Your tweezers look pretty sturdy compared to the crappy ones I use. If they are good quality where did you get them?
Theyāre rejected medical tweezers (used for animal surgery)
Its good reading about stories where one BLF member helps out another. Nice mod Yokiamy.
Nice Yoikiamy! That is my favorite build of all time!
I have two Eagle Eye X6 hosts en-route and I have the new Samsung LH351D emitters just waiting for the hosts to get here.
Kudoās to Jos on the help, good work the both of yāas.